AI45/261125/
Trutzschler Complete Blow Room Line
Year: 2017–2018
Includes:
Bale Opener (BO-E)
Condenser (BR-COI)
Pre Cleaner (CLP)
Condenser (LVSA)
Ventilator (TV 425)
Multimixer (MX-U6)
Sepromat-Astha (SP-H)
Cleanomat (CL-C3)
Condenser (LVSA)
Ventilator (TV 425)
Dustex(DX)
Excellent running condition
AI56/241125/
Savio Polar Machine
Quantity: 1, Year : 2013, 60 Spindle, Automatic, Single Robot, Loepfe Zenit Uster, Machine in Operation
AC29/241125/
Trutzschler TC5-1 Carding
Quantity: 12, Year: 4×2013-2×2012-2×2010-4×2009, Single Lickerin, Can size 1×1.1 m, With auto can changer.
AA05/101025E/YS-Y/F/BG/
Fadis Hank Winders TUAN E 500
Quantity: 2, Year: 1999-2000, Model TUAN E 500, 30 spindles each, Meter counter, Traverse 6” conical, waxing, 2 Splicers. Hanks up to 1,2 kilos, inverter, conometer, 2 x splicers each, double waxers, exit 6″, in perfect conditions.
AI92/201125E/YP-P/C/BA/
Gill Box
1*GC14 with Autoleveller and with bobbin delivery.
2*GC14 without autoleveller and with bobbin delivery of GC15.
The gills of GC14 can be refurbished, with all new faller and pin strip, new PLC, new rollers, new rubber, ect…And the bobbin delivery head are also with new PLC, also we will make test running before shipment.
AI43/201125D/AIL-AI/F/BQ/
Trutzschler TC10 Carding Machines (Triple Licker-in Type)
Quantity: 6, Year: 2017, Model: TC10 with Auto Doffer (Approdoff), Coiler: 40″, Running condition on mill floor, Immediate delivery available
AB45/201125/BY/
Marzoli Roving Frame
Quantity: 1, Year: 2001, Model FT1D, 120 Spindles, Spool size 6″ x 16″, Drafting SKF PK 1500, Short Cradle for cotton
Automatic doffing,, creel 3 position for cans 20” or 24”, Blower Magitex – 380 V 50 HZ , Upgrade PLC Simens year 2025, Machine in perfect condition , Condition: Dismantled, Delivery: 3 months from payment
AC29/211125E/RLI/M/AS/
Sant Andrea Passage & Finisher
1x PASSAGE 1 SANTA ANDREA CSN, YEAR: 2006
1x PASSAGE 2 SANTA ANDREA CSN, YEAR: 2006, REGULATOR
1x PASSAGE 3 SANTA ANDREA SH22, YEAR: 2006
1x PASSAGE 4 SANTA ANDREA HC22 , YEAR: 2002
1x FINISHER SANTA ANDREA RF5B, YEAR: 2006, 24 HEAD VERTICAL
AE02/201125E/ATR-P/M/
SSM Winder XENO-AC
Quantity: 1, Year: 2020, 40 positions
NOTE; Machine is in running condition and can be inspected any time.
Before planning inspection purchase price should be agreed.
AD81/171125E/YIY-AL/F/
Trutzschler Blowroom
Year: 2022
Trutzschler B19 – 2012 model – 1 Machine
Trutzschler CL-C3 -2022 model – 2 Machines
Trutzschler CL-U – 2022 model – 2 Machines
Trutzschler TS-T5 – 2022 model – 2 Machines
Trutzschler CL-X – 2022 model – 1 Machine
Trutzschler SP-DX – 2022 model – 1 Machine
Trutzschler SP-MF – 2022 model – 2 Machines
Trutzschler MX-U – 10 section mixer – 2022 model 1 Machine,
Trutzschler BO-R – 2022 model – 1 Machine
AE51/171125/
DOFAMA line
Quantity: 1, Year: 1990, Type OE 147B for a wash wool with 6 througs and 8 drums dryer
capacity of the machine is 1300 kg per hour unwashed/greasy/ wool.
The working width of the troughs is 180 cm. The depth of the troughs to the horizontal lattice bottoms / paper traps / is 60 cm
Line complete and stopped
AI08/181125D/YC-O/F/BA/
Cognetex MSC 6 Stretch Breaker
can size is 1000*1200mm., machine is in warehouse, machine can be tested running before shipment.
AA03/181125E/OA-T/F/
GUALCHIERANI Vrtical/Hydraulic Bale Press
Quantity: 1, Year: 1998, model FTC / 200 hydraulic
pressure 200 tons, bale size 1.600 x 1.100 x 800 mm, bale weight about 480 kg, strapling manua,
used for packing wool bobbins and bumps,approx. 10 kg / bumps,
height around : 8,5 meter and in fundament around 55 cm, only little working hours
AA10/181125E/CP-R/M/
NSC Gills GV10 transformed into GV11
Quantity: 1, Year 1989, Creel 10 cans, Automatic delivery 2 cans 700 x 1200, 1 sliver per can
AA30/171125/AX/
HDB Woollen Spinning Frames
Quantity: 2, Year: 1996, Type CBP5114, 200 Spindles, Ring 90mm, Pitch 120mm, Tube 400mm, Including new inverter drives, spindle tops and air pipes.
AC29/181125/
Rieter Cabling & Power Heatset
2x Rieter Cabling: Year: 2004, 144 spindles
1x Power Heatset: Year: 2004, Type: GVA 2500, 48 spindles with frise.
Machines stopped on mill.
AE42/171125/BQ/
NSC GC14 Gill Boxes
Year: 1993-1994
GC14 1×1 with autoleveller
GC14 2×1
GC14 2×2
Can size 1000×12000 , 700×1000 , 700×1000 each
AA02/161125/AN/
NSC PB32 & PB33 & ERA Combers
Quantity: 13
PB32 LJ
Quantity: 8, Year 1998-99, Delivery Type LJ
PB33 with LJ deliveries.
Quantity: 1, Year 2001
NSC SCHLUMBERGER COMBERS
Quantity: 4, Year:2004, Type ERA 40, Rebuilt to Staedler & Uhl Combs
AA10/181125E/TC-Y/M/BY/
Lezzeni Assembly Winders
Quantity: 4, Year: 1997-2001, mod.BR-240, 140 spindles (70×2), Ring dia.114 mm, gauge 240 mm, 3 ends.
AB45/171125/
Trutzschler Blowroom & Cards
01 Trutzschler bale plucker BDT 019
Year 1992, w.w. 1720 mm, channel length 20 mt
01 Trutzschler cage condenser mod LVSA
Year 1992
01 Trutzschler AFC type 052-25 02 (Axiflow)
Year 1992
01 Trutzschler Asta 800
Year 1992
01 Trutzschler Multimixer MM6/1200
Year 1992, 6 chambers
01 Trutzschler CVT3 097 Cleanomat cleaner
w.w. 1200 mm, Year 1992
01 Trutzschler Dust separator mod. DX 385
Year 1992
02 Trutzschler cards mod DK 803
Year 1998, Automatic can changer KH950/1000, Exit can 40”, Trutzschler chute feed
Electrical panel
Condition: Running
AA02/141125/
Rieter Ring Spinning Plant
BLOWROOM (NEW)
1x RIETER AUTOMATIC BALE OPENER
Type A12, Year of Manufacture 2024
1x RIETER UNICLEAN
Type B15, Year of Manufacture 2024
2x RIETER UNIMIX
Type B76, Year of Manufacture 2024
2x RIETER UNISTORE
Type A79, Year of Manufacture 2024
2x RIETER CONDENSERS
Type A21, Year of Manufacture 2024
1x RIETER CONTROL CENTER
Type UniControl, Year of Manufacture 2024
CARDING (NEW)
12x RIETER HIGH PRODUCTION CARDS
Model C.80, Year of Manufacture 2024, Up to 300kg / hour Production, Installed Power 18.5 KW main Motor, 35 KW total power, 44 Kva at 300 Kg / Hour, Chute Aerofeed, UniControl Suction Device, Single Licker In roller, Can size 1000mm x 1200mm, Automatic Can Changer.
DRAWING (NEW)
3x RIETER BREAKER DRAW FRAMES
Model SB.D22, Year of manufacture 2024, Double Headed, Creel for 6 Rovings, Can Size 600 x 1200mm, Auto doffing, Can Size 600 x 1200mm.
2x RIETER FINISHER DRAW FRAMES
Model RSB.D-26, Year of Manufacture 2024, Double Headed, Auto Levellers, Creel for 6 Roving, Can size 500 x 1200mm, Auto Doffing, Can Size 500 x 1070mm.
ROVING (NEW)
2x ELECTROJET ROVING FRAMES
Model ADR Plus, Year of Manufacture 2024, 144 Positions.
16 x 6 Bobbins, Auto Matic Doffing
With:
2x ELECTROJET TRAVELLING CLEANERS
With:
1x CENTRAL WASTE COLLECTION SYSTEM
ROVING BOBBIN TRANSFER (NEW)
1x ROVING BOBBIN TRANSFER SYSTEM
From 5 Roving Frames, To 12 Ring Spinning Frames, Approx 7,632 Bobbin Capacity, Year of Manufacture 2024.
SPINNING (NEW)
9x RIETER RING SPINNING FRAMES
Model G38, Year of Manufacture 2024, Compact ring spinning, 1824 Spindles, 70mm Gauge.
With ISM System
With Energy Consumption Monitoring
With:
(9) ELECTROJET Travelling Cleaners
With:
(2) Central Waste collection systems
Linked to:
9x SAVIO LINK CONERS
Model EcoPulsar Plis I DLS, Year of Manufacture 2024, 58 Position Frames, 52 Heads installed, Automatic Feeding plus, 1 Head manual feeding, Double end finding system, Dual air Feeding Splicer, SIS Spindle Identification System, Uster Quantum 4 Yarn Cleaners, With C15 F30 Sensors.
3x RIETER RING SPINNING FRAMES
Model G38, Year of Manufacture 2024, Compact ring spinning, 1824 Spindles, 70mm Gauge.
With Variospin slub effect capability
With ISM System
With Energy Consumption Monitoring
Linked to:
3x SAVIO LINK CONERS
Model EcoPulsar Plis I DLS, Year of Manufacture 2024, 58 Position Frames, 52 Heads installed, Automatic Feeding plus, 1 Head manual feeding, Double Axial yarn finding kit, Lycra yarn fit – moist splicer with or without Lycra, Dual air Feeding Splicer, SIS Spindle Identification System, Uster Quantum 4 Yarn Cleaners, With C15 F30 Sensors.
LABORATORY (NEW)
1x USTER EVEN-NESS YARN TESTER
Model UT6, Year of Manufacture 2024
1x USTER YARN STRENGTH TESTER
Model Tensorapid 5, Year of Manufacture 2024
1x USTER YARN COUNT ANALYSER
Autosorter 6, Year of Manufacture 2024
AG52/121125/BS/
Rieter Complete Cotton Spinning Line
Rieter E30 Unilap:
Quantity: 1, Year: 1999, Machine with feed for 28 cans, diameter 600 x 1,200 mm. Core dimensions: inner diameter 180 mm, outer diameter 200 mm, and length 300 mm. Semi-automatic lap delivery system to the comber, with Servo Trolley system.
Rieter E60-E62 Combers:
Quantity: 8, Year: 1997-1999, 8 combing heads equipped with automatic lap change system. Fixed comb Rieter Ri-Q-Top. Automatic can changer. Designed for upward air exhaust. High-performance lightweight alloy nippers with feed rollers for forward and backward motion. Detaching rollers with pneumatic pressure. Drafting system 3 X 3.
Rieter K45 Ring Spinning Frame:
Quantity: 7, Year: 2008, 1,632 spindles, ComforSpin machine – yarn compacting system. Drafting system driven by individual motors. Total draft programmed via control panel. Pre-draft by toothed gears. Drafting system with compaction zone. Double apron drafting system with pendulum arm type P 3.1, pneumatically loaded. Compaction zone with perforated and suction drums, with special surface finish. Spindle gauge: 70 mm. Flange 1 Titan ring, diameter 40 mm.
Rieter G33-G35 Ring Spinning Frame:
1x Model G33 = 1,200 spindles / Year 1999
8x Model G35 = 1,632 spindles / Year 2008
Spindle gauge: 70 mm. Suction unit installed at the machine head. Spindle drive motor. Intermediate drive for fluted roller. Drafting driven on both sides by 4 motors with respective gears. Maximum bobbin diameter: 7 inches. Bobbin lift: 16 inches. 3-roller drafting system with pneumatic pressure. Flange 1 Titan rings, 42 mm. Tube length: 210 mm. Internal diameter: 18 mm.
Rieter F30 Roving Frame:
Quantity: 1, Year: 1999, Machine with 120 spindles. Flyer diameter: 6 x 16 inches. Automatic doffing. Drafting system 3 over 3. Designed to accommodate 500 mm cans. Main motor controlled by inverter.
Saurer Autoconer AC5:
Quantity: 15, Year: 2008, 34 spindles / 32 spindles. Cone winder with winding angle 4°20’ (conical). Traverse drum system with yarn waxing device. Electronic clearer Loepfe Zenit. Air-splicing device for yarn joining.
Factory maintain the machine on best way possible and makes highest quality yarn.
5 sets of G35 & AC5 that were dismantled in June 2025.
1 set of K45 + AC5 autoconer dismantled in June 2025.
1 or 2 sets of G35 & AC5 will be dismantled in Jan 2026 – machines are in production until then.
6 or 7 sets of K45 & AC5 will be dismantled in Jan 2026 – machines are in production until then.
AG52/121125/BS/
Saurer Autoconer AC5
Quantity: 15, Year: 2008, 34 spindles / 32 spindles. Cone winder with winding angle 4°20’ (conical). Traverse drum system with yarn waxing device. Electronic clearer Loepfe Zenit. Air-splicing device for yarn joining. Factory maintain the machine on best way possible and makes highest quality yarn. 6 sets AC5 that were dismantled in June 2025. 9 sets of AC5 will be dismantled in Jan 2026 – machines are in production until then.
AG52/121125/BS/
Rieter F30 Roving Frame
Quantity: 1, Year: 1999, Machine with 120 spindles. Flyer diameter: 6 x 16 inches. Automatic doffing. Drafting system 3 over 3. Designed to accommodate 500 mm cans. Main motor controlled by inverter. Factory maintain the machine on best way possible and makes highest quality yarn.
AG52/121125/BS/
Rieter G33-G35 Ring Spinning Frame
1x Model G33 = 1,200 spindles / Year 1999
8x Model G35 = 1,632 spindles / Year 2008
Spindle gauge: 70 mm. Suction unit installed at the machine head. Spindle drive motor. Intermediate drive for fluted roller. Drafting driven on both sides by 4 motors with respective gears. Maximum bobbin diameter: 7 inches. Bobbin lift: 16 inches. 3-roller drafting system with pneumatic pressure. Flange 1 Titan rings, 42 mm. Tube length: 210 mm. Internal diameter: 18 mm. Factory maintain the machine on best way possible and makes highest quality yarn. 5 sets of G35 that were dismantled in June 2025. 1 or 2 sets of G35 will be dismantled in Jan 2026 – machines are in production until then.
AG52/121125/BS/
Rieter K45 Ring Spinning Frame
Quantity: 7, Year: 2008, 1,632 spindles, ComforSpin machine – yarn compacting system. Drafting system driven by individual motors. Total draft programmed via control panel. Pre-draft by toothed gears. Drafting system with compaction zone. Double apron drafting system with pendulum arm type P 3.1, pneumatically loaded. Compaction zone with perforated and suction drums, with special surface finish. Spindle gauge: 70 mm. Flange 1 Titan ring, diameter 40 mm. Factory maintain the machine on best way possible and makes highest quality yarn. 1 set of K45 dismantled in June 2025. 6 or 7 sets of K45 will be dismantled in Jan 2026 – machines are in production until then.
AG52/121125/BS/
Rieter E60-E62 Combers
Quantity: 8, Year: 1997-1999, 8 combing heads equipped with automatic lap change system. Fixed comb Rieter Ri-Q-Top. Automatic can changer. Designed for upward air exhaust. High-performance lightweight alloy nippers with feed rollers for forward and backward motion. Detaching rollers with pneumatic pressure. Drafting system 3 X 3. Factory maintain the machine on best way possible and makes highest quality yarn.
AG52/121125/BS/
Rieter E30 Unilap
Quantity: 1, Year: 1999, Machine with feed for 28 cans, diameter 600 x 1,200 mm. Core dimensions: inner diameter 180 mm, outer diameter 200 mm, and length 300 mm. Semi-automatic lap delivery system to the comber, with Servo Trolley system. Factory maintain the machine on best way possible and makes highest quality yarn.
AA05/101125/CL/
Complete Spinning Plant
Designed to process acrylic fibers from 50 mm to 120 mm in length.
Set up for a production capacity of 200,000 kg per month. Operating 24 hours a day at 1/40 and 1/70 count.
In operation until October 2025.
Includes approximately 4,000 plastic finishing tubes, approximately 10,000 continuous spinning bobbins, and 200 plastic process containers.
For sale as complete line.
Machinery:
1. Cognetex S.M.C.420 Combing and gathering machine, Year: 1999, Top feed and top feed – 16 slivers per side. Function: Combing and gathering machine, 2 slivers to 1.
2. Savio Cognetex SC400 Mecha Passage, Year 1992, SC.11Va, Top 12 tapes enter Exits in a 27″x33″ high container.
3. Savio Cognetex SC400 Sc22V Passage, Year 1992, 10 boats enter 1 boat exits (5 to 1), diameter 27″ x 33″ high.
4. NSC Finisher, Year 1985 Mod.Bm14 , 48 position outlet. Tube length 395 mm x, 60 mm diameter.
5. 2x Sant Andrea Novara continuous. year: 1980. Model: FE645/1941/1942, 43KW. Number of spindles: 470. Ring diameter: 80mm. Bobbin length: 300mm.
6. 2x Conetex Model FMC-18/79 Continuous , Number of Spindles 432 each. Ring Diameter 70 mm. Bobbin length 300 mm. Year 1979 Open stack, another year 1978 with pressure arm SXF962670.
7. 3x Murata Mach Cone Winders, Year 1988, 50-position splicer, Uster MOD: NKC-20, 2 cone outlets, 5-57° x 6″.
8. Volkmann MOD.VTS06 Twister, year: 1978, with 4 positions 80 stroke of 8¨ conical 5-57°x8¨.
9. Volkmann VTS06 Twisting Machine, Year 1996, 80 positions, Booth diameter 230mm, 8″ stroke, 5-57° x 6″ output.
10. Coupler Metrer, 2 fronts of 12 per side, couples up to 4 wires, spans up to 8 inches, cylindrical with rotation.
11. 4x Fadis Winders, 35 positions, 8.5-57°, all refurbished with variators for each head.
12. 1x radio frequency drying oven, year 1996, usable width 1400 mm Brand: Strayfield limited.
13. 3x Hieber HFTSMER Skein Dyeing Cabinets 360 Brand: Year: 1985.
14. 3x Hieber HFTSMER FTSMER 300k Skein Dyeing Cabinets with their frames, brand: Hieber, year -1986.
15. 2x Obem brand centrifuges, 1200mm diameter x 520mm high each, with electronic variator.
AB08/111125/
SALCE LABORATORY VOLUMETRIC DOSING SYSTEM
Salce Laboratory VOLUMETRIC DOSING MACHINE
Quantity: 1, Year: 2018
dye pipetting with space for 56 dye solution bottles and 8 chemical solution bottles
complete with computer-controlled mixing of solution bottles
Salce Dye Solution Maker
Quantity: 1, Year: 2018
with separate mixing station connected to central control computer
AG41/081125E/CP-R/M/BT/
Schlumberger FMV30
Quantity: 1, Year: 1986, False Twist, Area Needed(m): 12L*7W, Average production: 3200Kg, 32/16 spindles, Output: double, Gauge: 420mm. Machines are in production, in perfect condition.
AI08/071125E/ALO.L-AC/M/
Sant Andrea Preparation Line
1x VSN , Year: 1996, bobbin creel, and 1 sliver into 1 can with autoleveller, 700*1000.
1x VSN , Year: 1996, can creel, and 2 slivers into 1 can, 700*1000.
1x DSN , Year: 1996, can creel and 2 slivers 1 can, 700*1000.
1x SHS24 , Year: 1996, can creel, 4 slivers 2 can.
1x SF , Year: 1996, can creel, 24 positions.
AA10/051125E/OO-L/C/
Extrusion line STAREX 1000 – For PP Split Film
currently not producing for more than a year
Doser (4 components – natural, additive (5-30%), additive (0,5-5%) and additive (0,2-2%)
split titer was from 4000 dtex to 21500 dtex
no winder, On That machine – godets running 180-190 m/min, but it depends on extruded titer of pp split, but for 21500 dtex it was around 230 kg/hour
AB52/051125/
Complete Line
Warping machines
Benninger Ben Tronic warper with creel, year 2001
Benninger Ben Tronic warper with creel, year 2000
Karl Mayer GOM sample warper, year 1996
Preparation machines
SANT’ANDREA NOVARA 2MD, Year: 1997 – Output can 700 x 1000
SANT’ANDREA NOVARA CSN, Year: 1994 – Output can 700 x 1000
Combing machine NSC N. SCHLUMBERGER & CIE – PB33LJ – 2003 – Output can 800 x 1200
Combing machine NSC N. SCHLUMBERGER & CIE – PB33LJ – 2003 – Output can 800 x 1200
Combing machine NSC N. SCHLUMBERGER & CIE – PB33LJ – 2003 – Output can 800 x 1200
Combing machine NSC N. SCHLUMBERGER & CIE – PB33LJ – 2006 – Output can 800 x 1200
Combing machine NSC N. SCHLUMBERGER & CIE – PB33LJ – 2006 – Output can 800 x 1200
NSC N. SCHLUMBERGER & CIE GC15 2000
Accessories: 6, Input can 800 x 1200, Output can 700 x 1000 with ensimange
1st Pass NSC N. SCHLUMBERGER & CIE GC15 2000 – 30327
2nd Pass SANT’ANDREA NOVARA CSN 1999 – M4483388R
4th Pass SANT’ANDREA NOVARA SHE24 2011 – M4560630
Finisher 1 SANT’ANDREA NOVARA RF4/A 2002 – 16 heads, rack for 32 cans 800 x 1200
Finisher 2 SANT’ANDREA NOVARA RF4/A 2002 – 16 heads, rack for 32 cans 800 x 1200
Twisting machines
Twister 2 (5 and 6) SAVIO TDS 15N year 1992 – Double drive, double twist, 200 spindles
Twister 3 (7 and 8) SAVIO TDS 15N year 1985 – Double drive, double twist, 200 spindles
Twister 4 (9 and 10) SAVIO TDS 15N year 1985 – Double drive, double twist, 200 spindles
Twister 5 (11 and 12) SAVIO TDS 15N year 1985 – Double drive, double twist, 200 spindles
Twister 6 (13 and 14) SAVIO TDS 15N year 1991 – Double drive, double twist, 200 spindles
Spinning, winding and steaming machines
Spinning frame 1 SAURER ZINSER 451 IMPACT FX 2018 – 576 spindles, with Magitex blower, gauge 75, ring 45, tube 220
Spinning frame 2 SAURER ZINSER 451 IMPACT FX 2018 – 576 spindles, with Magitex blower, gauge 75, ring 45, tube 220
Spinning frame 3 SAVIO COGNETEX FLC 16 L 1984 – 544 spindles, with Pinter system from 2007 (machine stopped for some years, without suction motor)
Spinning frame 4 SAVIO COGNETEX FLC 16 L 1984 – 544 spindles, with Pinter system from 2018 and Magitextile blower
Spinning frame 7 SAURER ZINSER 451 IMPACT FX 2018 – 576 spindles, with Magitex blower, gauge 75, ring 45, tube 220
Spinning frame 8 SAURER ZINSER 451 IMPACT FX 2018 – 576 spindles, with Magitex blower and Pinter system, from 2018, gauge 75, ring 45, tube 220
Spinning frame 9 ZINSER 421 E 1992 – 580 spindles, with Electro blower, gauge 82.5, ring 51, tube 260
Spinning frame 10 ZINSER 421 E 1992 – 580 spindles, with Magitex blower and Pinter system MA1 from 2023, gauge 82.5, ring 51, tube 260
Winder 1 SAURER SCHLAFHORST AUTOCONER X6 2018 – 20 heads
Winder 2 SAURER SCHLAFHORST AUTOCONER X6 2018 – 20 heads
Winder 7 SAURER SCHLAFHORST AUTOCONER X6 2018 – 20 heads
Winder 8 SAURER SCHLAFHORST AUTOCONER X6 2018 – 20 heads
Steamer 1 O.M.V. VAPORFIL VAP L 40 2018
Steamer 2 O.M.V. VAPORFIL VAP L 40 2018
Steamer 5 O.M.V. VAPORFIL VAP L 40 2016
Steamer 6 O.M.V. VAPORFIL VAP L 40 2016
Steamer 7 O.M.V. VAPORFIL VAP L 40 2018
Steamer 8 O.M.V. VAPORFIL VAP L 40 2019
OBEM Steamer 1 OBEM VFV 250/K 1979 – Dimensions 1300 x 2755
OBEM Steamer 2 OBEM VFV 250/K 1979 – Dimensions 1300 x 2755
External winder 1 OERLIKON SCHLAFHORST AUTOCONER 5 year 2007 – 24 heads with bobbin loader, 6” output
External winder 2 OERLIKON SCHLAFHORST AUTOCONER 5 year 2007 – 24 heads with bobbin loader, 6” output
Other
Rewinding machine Corimatex Mod. 3M 95 year 1998
4 darning benches Eurometallica
3 darning benches Regis
Bellini dyeing plant for bobbins/tops consisting of:
2 Bellini dyeing vessels: RBNV 1040/975 – N.F. 272150 year 2007 and RBNVI 1040/975 – N.F. 281640 year 2008
1 centrifuge IN2007.218 year 2007
Bellini dryer AA 1200/2200 IN2007.220 year 2007
Airflox Minox Model DUO 4/C N.F. 1722 year 1995
Mini Specola SIMA
Gavazzi laboratory dyeing machine CAMPIOCOLOR year 1995
Rotating dye warehouse Lawer with 8 shelves mod. MR2/8/670/450×4500 year 1995
Complete stenter line:
Foulard TMT Model F3C 18 T Differential Table 2000 year 2003
Weft straightener E&L Type Elstraight year 2008
Stenter Effedue Type Flat 2000L 4 fields year 2003
Washing MCS Starwash with Cimi Rotordry hydroextractor
Darning bench Regis Model MC 90F TC H1800 year 1998
Finished darning bench Regis with winder Model MC 90R TL H2000 year 2002
Steamer Nanomix Biella Shrunk Process year 2011
Preparation Regis Mod. LF2/EC H2000 Serial 731 year 1995
Shearing machine Regis Model RG90 2R-4D H1800 year 1995
Continuous decatizing Biella Shrunk Process Thermo Duplex 90 year 2001
Finished darning bench Regis Model MC 90F TL H1800 year 2001
AI08/041125/AS/
Sant Andrea Preparation Line
Year: 2018
1x RST21, 24 ends feeding, with roller draft, 1000*1200 output.
1x ST21, 10 ends feeding, 800*1200mm output, with autoleveller.
1x ST21, 10 ends feeeding, 800*1200mm output.
1x SH24, 18 ends feeding, 800*1200mm output.
1x RF5E, 24 heads, fully electric, 33cm bobbin.
AE30/051125D/RAI-CI/F/BA/
Rieter E66 Combers & Rieter E35 Unilap lap winder
Rieter E66 Combers
Quantity: 6, Year 2014, can size 24*48, Waste collection: continuous
Suction: upwards., Voltage: 380V 50HZ
Rieter E35 Unilap lap winder
Quantity: 1, Year: 2014
AA03/031125E/AI-C/M/
Temafa Bale Opener
Quantity: 3, Year: 1985, ww 1,40m, bale tipper , feeding conveyor 8m length, additional shut feeder on top for feeding, Additional components.
AA03/031125E/AL-R/M/
HDB Bale Weighing Opener
Quantity: 5, Year: 1987, ww 1,40m, With bale tipper, With electronic scale, upgraded, feeding onto a common conveyor belt.