AG75/111123D/CAI-AI/M/BA/
Barmag FK6-1000V Texturizing
Quantity: 2, Year: 2017, 288 spindles, Still working, Very good machines.
AE56/091123D/CRI-AI/F/
Barmag Texturizing Machine
Quantity: 2, Year: 2017, type: FK6-1000, 280 spindle, Three roller, Pneumatic rod
AA02/081123/AR/
POLYESTER POY /DTY SPINNING PLANT
SPINNING/EXTRUSION MACHINES
TEXTURING PLANT: TEXTURING MACHINES WITH CAPABILITIES TO PRODUCE 60,000 LBS/DAY
SPINNING PLANT: PRODUCES POY (PARTIALLY ORIENTED YARN)
TEXTURED PLANT: CONVERTS POY TO TEXTURED YARN
TWISTING PLANT: 24 MACHINES WITH CAPABILITES TO PRODUCE 20,000 LBS./ DAY, CONVERTS TEXTURED YARN TO TWISTED SEWING THREAD FOR APPAREL.
Installed in 2013 and ran only until 2017 now stopped infact line 1 spinning was never in production as the plant never got upto full production.
AA02/081123D/RIII/M/AR/
Complete Polyester POY spinning Line
Total Capacity 60,000 Lbs per day
Year of manufacture 2012/2013
Actual production hours lee than 5 Years
Manufactured by Beijing Chonglee Machinery Eng &
Chemical Fiber Co. Ltd
Using Barmag Technology
380 Volts 3 Phase 50/60 Hertz
Comprising of:
2 Drytec Chip Crystalizers and Driers
By Zhengzhu Zhongyuan Drying Technique Co. Ltd
#1 – Capacity 74,075 Lbs per day
#2 – Capacity 26,455 Lbs per day
1 Master Batch Chip preparation with
K-Tron computerized color Mixing and
Monitoring Station
1 Spin Pack Clean Down Unit
Comprising of
(1) Hypox MovEngineering Heater
(1) Vibromincs Ultra Sonic Cleaner
5 Extrusion Lines
Line 1 – Capacity 30,000 Lbs per day
Extruder Monocolor with K.Tron Color Mixer
12 Positions – 120 Thread Lines
Denier Range 125-275
(12) Quench and spray Finish applicators
(1) 24 Rod Dowtherm Heater
(12) Godet Sections each with 2 Cold Godets
(12) Automatic Craft AW winders
Model BWA.40II-1500/10
Chuck Length 1500mm
Chuck Dia 105mm
Auto doffing
10 Ends precision wind
Line 2 – Capacity 10,000 Lbs per day
Extruder Monocolor with K.Tron Color Mixer
4 Positions – 40 thread lines
Denier Range 125-275
(4) Quench and spray Finish applicators
(1) 24 Rod Dowtherm Heater
(4) Godet Sections each with 2 Cold Godets
(4) Automatic Craft AW winders
Model BWA.40II-1500/10
Chuck Length 1500mm
Chuck Dia 105mm
Auto doffing
10 Ends precision wind
Line 3 – Capacity 10,000 Lbs per day
Extruder Monocolor with K.Tron Color Mixer
4 Positions – 40 thread Lines
Denier Range 125-275
(4) Quench and spray Finish applicators
(1) 24 Rod Dowtherm Heater
(4) Godet Sections each with 2 Cold Godets
(4) Automatic Craft AW winders
Model BWA.40II-1500/10
Chuck Length 1500mm
Chuck Dia 105mm
Auto doffing
10 Ends precision wind
Line 4 – Capacity 5,000 Lbs per day
Extruder Monocolor with K.Tron Color Mixer
2 Positions – 20 thread lines
Denier Range 250-550
(2) Quench and spray Finish applicators
(1) 24 Rod Dowtherm Heater
(2) Godet Sections each with 2 Cold Godets
(2) Automatic Craft AW winders
Model BWA.40II-1500/10
Chuck Length 1500mm
Chuck Dia 105mm
Auto doffing
10 Ends precision wind
Line 5 – Capacity 5,000 Lbs per day
Extruder Monocolor with K.Tron Color Mixer
2 Positions – 20 Thread Lines
Denier Range 250-550
(2) Quench and spray Finish applicators
(1) 24 Rod Dowtherm Heater
(2) Godet Sections each with 2 Cold Godets
(2) Automatic Craft AW winders
Model BWA.40II-1500/10
Chuck Length 1500mm
Chuck Dia 105mm
Auto doffing
10 Ends precision wind
1 Spare Winder
Automatic Craft AW winder
Model BWA.40II-1500/10
Chuck Length 1500mm
Chuck Dia 105mm
Auto doffing
10 Ends precision wind
1 Gualcherani Automatic Doffer / Transport Unit
Transferring full packages from winders
To Mobile package trollies
Year 2013
AA02/081123D/OLI/M/AR/
Draw Texturizing
6 Himson Draw Texturizers
Year 2012 / 2013
Two Heaters 1.75 meters long
Two Roll Heberlein Interlacing Jets
Multi Position Creels
Double Sided
Disk Friction Units
Max Temp 230 deg C
Max Package 21kg
Without Unitens on line monitoring
(3) Model ASS.AX.9AT
288 positions
10 inch take up
Denier Range 75-300
Automatic Doffing by TMT
Common drive to both sides
(2) Model ASS.AX.9AT
288 positions
10 inch take up
Denier Range 75-300
Automatic Doffing by TMT
Dual Independent drives to each side
(1) Model HSS.AX4-TS
224 positions
10 inch take up
Denier Range 300-600
Manual Doffing
Capacity to run 2 ends per position
Common drive to both sides
480 Volts 3 Phase 50/60 hertz
AA02/081123D/TII/M/AR/
Twisting:
24 Aalidhra Twisters
Model Tex-Pro-230
Manual doffing
Central Full Package Carrier
60 to 300 TPM
D.Tex Range 175 to 600
(17) with Dye Tube Take up
152 Positions
Double Sided
4500 RPM spindle Speed
Manual hand Brakes
210 mm traverse
230mm tube length
Cylindrical take up
Gear Drive
Year 2012 / 2013
(4) with Sewing Thread Cone Take up
144 Positions
Double Sided
4500 RPM spindle Speed
Manual hand Brakes
150 mm traverse
Cone Take up 3 deg 30 cones
Inverter Drives
Year 2012 / 2013
(3) with Sewing Thread Cone Take up
144 Positions
Double Sided
4500 RPM spindle Speed
Foot Brakes
150 mm traverse
Cone Take up 3 deg 30 cones
Year 2007
480 Volts 3 phase 50 / 60 Hertz
Your consideration and immediate reply is highly appreciated
Warranty Disclaimer
This is a sale of pre-owned goods which are being sold "as is" and "with all faults", and purchaser
acknowledges that there is no implied warranty that the goods shall be merchantable, or any implied
warranty that the goods shall be fit for any particular purpose, the purchaser acknowledges that it has
inspected the goods to its satisfaction, that it is not relying on the seller's skill or judgment to select or furnish
goods suitable for any particular purpose, and that there are no warranties which extend beyond the
description of the goods on the face of this invoice.
In no event shall Gibbs international, Inc, or any of its affiliates or subsidiaries be liable for special, collateral,
incidental, or consequential damages on account of this sale, any and all claims related to the goods and
the use and operation thereof must be directed to the original manufacturer.
Purchaser agrees to indemnify and hold the seller harmless from and against all damages, costs, and
expenses (including attorneys' fees) incurred by seller in the defense of personal injury claims brought by
persons injured while using the goods at the purchaser's premises, or while in the purchaser’s employment.
AA23/171023/BY/
Small Line for Knit-de-Knit Yarn
Small Line for Knit-de-Knit Yarn (K de K) like texturized PES yarn, composed of:
8x Harry Lucas knit machines moel RSK-POY – 8 KOPF , Year: 2002-2004
(dia 3.1/2″; gauge E=18 – 6 pcs and E=14 – 2 pcs `) each machine of 8 knitting heads with heated roller 9 FOR YARN and heated zone for ready knitted sleeve of 7-8 cm with. Heating power -500KW on each heater plate (per each sleeve), Individual drive for each 2 knitting positions (4 motors per machine).
8x METEX guide winders moel WP42/6 – Year: 2002/2004
Each of 6 winding positions with inividual drive, and central oiling/waxing on each position. Delivery bobbins conical dia 40 x 80 mm dia on ends and 290 mm length. Length of winding 255 mm – weight of full bobbin – about 2 kgs.
PRACTICAL OUTPUT DEPENDING ON THICKNES OF READY YARN
– FOR DTEX 1000 – 240 KGS PER ONE SHIFT PER 8 HEADS ON MACHINE
– FOR DTEX 600
Complete with creel and spare paarts as in warehouse (a few heads, needles, sinkers, teflon rings etc`)
Still running very seldom however.
AC86/151023/BY/
Texturizing Complete Line
MENEGATTO – type TMA – 168 Position – YEAR 2002 – Double oven – Autodoffing Bobin 290mm.
GIUDICI TG 30 FA – 84 Positions – Year 2002 – Double oven – Autodoffing – Bobin290mm.
GIUDICI TG 30 FA – 60 Positions – Year 2001 Rewind Year 2019 – Autodoffing – Bobin 230.
RPR SDX4 – 168 Positions – Year 1998 – Double oven – Bobin 290mm.
LEZZENI COPS WINTER – 48 Positions Year 2010 – 126 Positions Year 2005.
RITE ELECTRONIC BININATOR ARD YEAR 2000 28 POSITIONS.
RPR GC-96 – Spindles 96 or 120 – Year 1998 – Bobin 290mm.
RPR GC 240N – Spindles 125mm type MTS – Cops 420mm – Bobin 230mm Year 2000.
RATTI 326 Spindles Y – COPS 420MM – Number 240 Spindles – Bobin 230mm.
GIUDICI DOUPLEX 400 – Pot diameter 260mm – Bobin 290mm – Year 2000.
SAURER VOLKMANN TYPE VTS 5 Year 1997 – N. 40 Positions – Exit 10″ – Enter 260mm.
MENEGATTO PIRN WINTER – TYPE HP – Position 24 – Year 2005.
FADIS WINDING – Number 12 positions – Autodoffing – Oil device – final bonin 230.
HAMMEL ELAST TWIST YARNS – TYPE 2020 S NUMBER 192 POSITIONS.
BENNINGER WARPING – TYPE BEN MATIC YEAR 2005 WITH CREEL.
BENNINGER WARPING – TYPE VERSOMAT YEAR 2008 WITH CRREL.
GAMMATEX WARPING – DIRECT GI310/CC YEAR 1998 WITH CREEL.
STEAM OBEN LT 15.000.
STEAM GRANDIS APF 900/S YEAR 2003 COMPLETED BOILER.
All Plant running conditions.
AC29/151023/AS/
Complete Plant For Produce POY
Quantity: 1, Year: 2019 (2021 start work),
Made in China, From granul and recycle, 300 to 500 denair, Very good quality
Stopped on mill, 3 extruder, 18 winders each 10 ends, 40 tons capacity per day
AC29/121023E/ROI-CI/M/AS/
SSM Air Texturizing DP5-TC
Quantity: 2, Year: 2015, 40 spindles, 5 codet, Automatic doffing, Very good condition.
AB60/091023E/CYAL-AAL/M/
Complete Starlinger Line
Year: 2020
4,200,000 pcs per month (150 tons)
To produce bags
Process:
1. Extrusion of PP yarn TAPE YARN Extruder starEX 1600 ES
Capacity 250tons/per month (100 ton available for extra production – was planned for Square big bags production with flat weaving Picanol machines (not included but available in another offer)).
Optional equipment included:
1x Gravimetric batch blender graviTEC 705
1x Extruder E-120 TD 330 with melt Pump
1x Edge trim recycling with feeding screw
1x Stretching Unit with 8godets (2N 4H 2C)Incl. Protecting cover and hot oil svstem.
288x Winding machine linTape 200LX
1x Water Chilling Unit 3HM 280 ST
25x Circular loom alpha 6.0 for bags production
optional equipment included:
25x Additional weaving ring
3x Circular loom alpha 6.0 for bags production
optional equipment included:
3x Additional weaving ring
3x Second surface winder above the other 576 Pos
3x Ultra sonic slitting device, bilateral (Decoup)
5x Circular loom alpha 6.0 for bags production
optional equipment included:
5x Two Creels 720 Positions
5x Grommet Band Version 720 Posit ons
5x Additional weaving ring
5x Unfolding device and surface winder
5x Ultra sonic slitting device, center (Oecoup)
1x Coating line lamiTEC LX
optional equipment included:
1x Winding shaft 4″
1x Winding shaft 8″
1x Spreader roller for flat fabric
lx D-RSR Auto scrap recycling system
1x Water Chilling Unit 3HM 230 ST
1x Roll to roll printing machine dynaFLEX DX 6 ad*star
optional equipment included:
1x Unwinding shaft 4″
1x Video lnspectlon system
1x Viscosity control
1x Colour quick change
1x Conversion Line ad*starKON HX
optional equipment included:
1x microSTAR+ bilateral microperforation (additional)
1x Strip slitting machine slltTEC 700 IC*STAR
1x Air flow tester
2x Fully Automatic Air Compressor Unit GA-FF 26+ kW
1x Conversion line multiKON KX
optional equipment included:
1x Configuration sewing machine
1x Top feed sewing machine
1x Trolleys for quick change
Note: Space needed: around 3000 to 4000 sq m (including storing of production).
AB46/091023E/AOI-CI/M/AN/
Barmag Texturizing Machine
Quantity: 1, Year: 2005,Model MPS, Positions 108, Rotating creel yes, Profile V-Diphyl, Heater Doubleheater, Drive godet, Doff automatic, intermingling yes
AB46/091023E/AOI-CI/M/AN/
Barmag Texturing Machine
Quantity: 6, Year: 2004, Model MPS, Positions 108, Rotating creel yes, Profile V-HTI, Heater Doubleheater, Drive godet, Doff automatic, intermingling yes
AB08/110723E/LC.L-AL/F/BJ/
Barmag FB 7 PP/PE Tape Extrusion Line with Sahm Winder
1 X BARMAG PP/PE TAPE EXTRUSION LINE
Year: 1994, Type: FB 7
Motorize Mixer – 100 kgs per mix capacity
Dosing unit – 120 kgs capacity, sensor operated, vacuum type
Main Motor/drive – Siemens, 3 phase, 156KW
Screw and Barrel – 3000kgs/24h capacity, Polypropylene and Polyethylene compatible
Gear pump – Pressure controlled speed
Die – Hanger type, 1300 mm Plastic flow width
Water bath – Cooling system, closed circuit 1050 L capacity
Cutting device – 1300 mm Plastic flow width capacity, ring tape spacers
Oven – Hot air blower type, 87KW
Goddets – 5 x segment godet from stretching unit to annealing, oil heated
Tape Suction Unit – 2 x motor covering 1st godet to the last, 2 x entry
Cutting mill/ chipper unit – 1.7 KW rotter type blades single feed to hopper
1 X SAHM SENSOTRONIC WINDER, 240E
YEAR: (2001 – 2005), Positions: 168 +64, Bobbin length: 330mm, Bobbin diameter ID: 90mm.
AC29/140823/
POY, PET Line
New in Boxes
20 ton-75/150
5 on PBT
2.5 ton Bicompanent
43 positions
1. Auxiliary Equipment:
1.1Pack preparation equipment and Spin finish preparation equipment:
3x Vacuum pyrolysis, Horizontal type
2x TEG cleaning oven, 3 oven/set
2x Alkali (Water) washing tank, 3 tanks/set
3x Ultrasonic cleaner
1x Pack pre-heating oven (PHO), Drawer type
2x Hydraulic lift insulation trolley
1x Pack pre-heating oven (PHO), Horizontal type, 2-layer
3x Pack pre-heating and insulation trolley
1x Metal sand drying oven
1x Spinneret drying oven
1x Spinneret microscope checking bench, manual operation
2x Spin finish preparation tank ,1500L (for reference)13
2x Spin finish storage tank, 1500L (for reference)
1xlot Cable and wires
1xlot Pipeline
1.2 Lab instruments:
1x Sample skein winder
1x Precision electronic balance, Accuracy 1mg/200g
2x Single yarn strength tester, For strength & elongation
1x Thermal stress tester
1x Yarn evenness tester, China-made
1x Abbe refractometer, For spin finish concentration
1x Super constant temp. water bath
1x Biological microscope
1x Hartz slicer
2x Standard light box (ultraviolet light)
1x Digital yarn tension meter
1x Anemometer, For testing air velocity
1x Stroboscope speedometer
1x Hand-held digital thermometer
1x Infrared point thermometer
1x M-viscometer
1x Heating magnetic stirrer
1x Differential pressure moisture meter, For testing chips moisture
1x Filament curling rate tester, For DTY yarn
1x Fiber oil fast extractor (free as a gift), For OPU on yarn
1x Precision electronic balance (as a gift), Accuracy 0.1mg/1OOg
1x UPS and compressed air supply
1.3 Air Handling Unit (AHU):
AHU (ASC-20F 120000m3/h+80000m3/h for 43 Pos POY)
1x Air return section
1x Air mixing section
1x Pre filtration section, Efficiency G3, nonwoven bag
1x Cooling section, Cooler 4+4 rows
1x Spraying section, Spraying pump
1x Electric heating
1x Blowing section, a. quenching: 120000m3th – b. take-up air: 80000m3/h
1x Fine filtration section, Efficiency F9, nonwoven bag
1x Outlet section
1x Control system, a. Siemens controller – b. Yaskawa inverter
1x Cable and wires
1x Air ducts, Supply, return, fresh
1x Chiller
1x Chilled water pump
1x Cooling water pump
1x Cooling tower
1x Pipeline, valves, fittings
2. Extra Spares
2.1 Filter candle
200 pcs Filter candle for CPF of PET POY line
50 pcs Filter candle for CPF of PBT POY line
50 pcs Filter candle for CPF of Bi-Co POY line
2.2 Filter mesh for Spin Pack
7000 pcs Filter mesh (for ¢88 pack)
2000 pcs Filter mesh (for DIO ¢88 pack)
1000 pcs Filter mesh (for DIO ¢115 pack)
2.3 Metalsand
Metal sand 30-40µm / 3000 kg
Metal sand 40-60µm / 2000 kg
3. Details of Normal Spinneret and Bi-Co Spin Pack and Bi-Co Spinneret
Line No. P1-P4
Product: PET POY
Pos nos. 16 pos
End nos. 12 ends /pos
Spinneret spec. ¢88
Capillary hole shape: round/Trilobal
Deff (DTY): 75D/72F – 75D/72F
Spinneret nos. 288-2888
Line No. P5-P6
Product: PET POY
Pos nos. 6 pos
End nos. 12 ends /pos
Spinneret spec. ¢88
Capillary hole shape: round/Trilobal
Deff (DTY): 75D/72F – 75D/72F
Spinneret nos. 108-108
Line No. P7-P11
Product: PET POY
Pos nos. 10 pos
End nos. 12 ends /pos
Spinneret spec. ¢88
Capillary hole shape: round/-
Deff (DTY): 75D/144F –
Spinneret nos. 180+60 –
Line No. P12-P13
Product: PET POY
Pos nos. 8 pos
End nos. 12 ends /pos
Spinneret spec. DIO¢88
Capillary hole shape: round/-
Deff (DTY): 75D/24F
Spinneret nos. 96 –
Line No. P14
Product: PET/PBT Bi-Co POY (50:50) – PET/PA6 Bi-Co POY (75:25)
Pos nos. 3 pos
End nos. 12 ends /pos
Spinneret spec. DIO¢115
Capillary hole shape: SBS round- SBS round- Segmented Pie
Deff (DTY): 75D/24F – 75D/48F – 75D/36F
Spinneret nos. 18+2 (Bi-Co) – 18+2 (Bi-Co) – 18+2 (Bi-Co)
Pack nos. 36 (Bi-Co)
Total quantity:
1) Spinneret
2) Spinneret
3) Spinneret
4) Spinneret DIO
5) Bi-co Spinneret DIO
6) Bi-co Spinneret DIO
7) Bi-co Spinneret DIO
8) Bi-co Spin Pack DIO
AA02/120823E/CTII-AII/M/AV/
BCF Carpet Yarn Plant
Extrusion and Spinning
Line BCF4:
1x NEUMAG BCF Spinning Line
Model S.5
PP, PES & PA6 Polymers
Production Capacity 150 to 200 tine per month
Year 2006
3 Positions
3 ends per position
9 Thread lines
120 / 330 filaments per thread
Modular Steel Frame Construction
Comprising of:
1 Neumag Extruder
Model 15E1030D
Type E10
150 mm Screw diameter
4500 mm Screw length
Running nylon PA.66
Suitable for PES, PP also
Doteco Gravimetric 3 color polymer dosing
Single Spin Beam with 3 Position
Spinerettes with 120 or 330 holes
Rectangular Spinnerets with 120 or 330 holes
Filament Cross Section Trilobal
Drawing and BCP system
Each position Consisting of:
1 pinch Points
1 Cold Draw Godet
2 Hot Texturing Godets with Tension roller
1 Crimper set drum 16-inch diameter
2 Heated Setting Godet Rolls
1 Therm Boiler for heat setting
Take up Winders
3 OERLIKON-NEUMAG HIGH PRODUCTION TAKE UP WINDERS
Model WiTras
3-ends per winder
70 mm Chuck diameter
1000 mm Total Chuck Length
10-inch traverse
Winding speed 3600 meter per min
Bi-Rotor (Spindle)
Continuous winding
Automatic Doffing
Automatic Empty tube Transfer
Double Motor
With Drive Control
Line BCF.5 – Steel framework with BCF6 combined:
1x RIETER / SWISSTEX BCF SPINNING LINE
Model M40
PP, MFI 20-25 Polymer
PES (IV0.,78-0.82 dl/g) Polymer &
PA6 Nylon 6 Polymers
Production Capacity 135 to 180 tine per month
Year 2007
Single Position
4 ends per position
4 Thread lines
120 / 330 filaments per thread
Modular Steel Frame Construction BCF5 & BCF6
Comprising of:
1 Rieter Extruder
75 mm Screw diameter x 30 (L/D Ratio)
Running nylon PA.6
Suitable for PES, 50 – 170k g/hr
PP 45 – 160 kg/hr
Doteco Gravimetric 3 color polymer dosing
Single Spin Beam & Spin Pump with 1 Position
Rectangular Spinnerets with 120 or 330 holes
Filament Cross Section Trilobal
Quench Cabinet
1255mm wide x 1730mm
Drawing and BCF system
1 pinch Point
1 Cold Draw Godet
2 Hot Texturing Godets with Tension roller
Texturing Jets V4/061 HPc
1 Crimper set drum 16-inch diameter
2 Heated Setting Godet Rolls
Take up Winder
2 Rieter High Production Take up winder
Model FW12
2-ends per winder
73 mm Chuck diameter
600mm Total Chuck Length
10-inch traverse (254mm)
Max Package Diameter 300mm
Winding speed 3600 meter per min
Bi-Rotor (Spindle)
Continuous winding
Automatic Doffing
Automatic Empty tube Transfer
Double Motor
With Drive Control
Line BCF.6 – Steel framework with BCF5 combined:
1x TRUETZSCHLER / SWISSTEX BCF SPINNING LINE
Model M40
PP, MFI 20-25 Polymer
PES (IV0.,78-0.82 dl/g) Polymer &
PA6 Nylon 6 Polymers
Production Capacity 135 to 180 tine per month
Year 2017
Single Position
4 ends per position
4 Thread lines
120 / 330 filaments per thread
Modular Steel Frame Construction BCF5 & BCF6
Comprising of:
1 Truetzschler / SwissTex Extruder
75 mm Screw diameter x 30 (L/D Ratio)
Running nylon PA.6
Suitable for PES, 50 – 170k g/hr
PP 45 – 160 kg/hr
Doteco Gravimetric 3 color polymer dosing
Single Spin Beam & Spin Pump with 1 Position
Rectangular Spinnerets with 120 or 330 holes
Filament Cross Section Trilobal
Quench Cabinet
1255mm wide x 1730mm
Drawing and BCF system
1 pinch Point
1 Cold Draw Godet
2 Hot Texturing Godets with Tension roller
Texturing Jets V4/061 HPc
1 Crimper set drum 16-inch diameter
2 Heated Setting Godet Rolls
Take up Winder
2 Truetzschler / SwissTex High Production Take up winder
Model FW12
2-ends per winder
73 mm Chuck diameter
600mm Total Chuck Length
10-inch traverse (254mm)
Max Package Diameter 300mm
Winding speed 3600 meter per min
Bi-Rotor (Spindle)
Continuous winding
Automatic Doffing
Automatic Empty tube Transfer
Double Motor
With Drive Control
Pilot – Laboratory Line:
1x SPINBOY Pilot Line
For Color Development and Quality Control
Year:2007
Single Position
Extruder 25mm diameter with L/d Ratio :30
MicroProcessor controlled pressure Regulator
Gear Driven Spin Pump
Spin Head with electrically heated and computer controlled
Air Quench
2 Hot Draw Rolls
2 Cold Draw Rolls
Digital Indicators
Three Dimensional Hot air Textuising
Precision Cross Winder
250mm Traverse for standard tubes 73-75mm diameter
Speed 400 to 1200 meters per min
Automatic speed tension control
By electronic dancing roller
Masterbatch:
1x MASTERBATCH PREPARATION PLANT
By Berlin USA
Year 1992
With Chip Weighing system and 3 Extruders
Accessories:
2x Raw Material Chip Silos
1x PES CHIP CRYSTALISER
With Chip Drier
Power Panels
Water Chillers
Air Compressors
Dow Therm Boilers
Cablers:
1x SAURER VOLKMANN CARPET CABLER
Type 05-O-C-F
Series 8.02
Year:2018
144 spindles
Cable Creel
Air Treading
Rip cord cable stop
Tube Take-Up 10 inch
S and Z Twist
2 position Cable Creel with Pull-Down Loading
495 mm Spindle Gauge
1x VOLKMANN CARPER CABLER
Type 05-O-C
Design Type 8.02
Year:2010
104 spindles
Cable Creel
Air Treading
Rip cord cable stop
Tube Take-Up 10 inch
S and Z Twist
2 position Cable Creel with Pull-Down Loading
495 mm Spindle Gauge
4x RIETER ICBT CARPET CABLERS
Model CD 510
Year:2010
120 spindles
Cable Creel
Air Treading
Rip cord cable stop
Tube Take-Up __ mm Tube Length
S and Z Twist
10 inch Cone Take up
2 position Cable Creel with Pull-Down Loading
500 mm Spindle Gauge
3x RIETER ICBT CARPET CABLERS
Model CD 510
Year:2017
72 spindles
Cable Creel
Air Treading
Rip cord cable stop
Tube Take-Up __ mm Tube Length
S and Z Twist
10 inch Cone Take up
2 position Cable Creel with Pull-Down Loading
500 mm Spindle Gauge
Heat Setting:
1x SUPERBA HEAT SETTING LINE
Model TVP2S
Year:1992 – 2016
36 end Creel
Superba Friseur Texturing Unit
Model MF4
Superba Fixing
Superba Steaming Tunnel 12 meter
Superba Accumulator
Gilbos Take up winders
36 ends
10-inch traverse
Auto Doffing
1x SUPERBA HEAT SETTING LINE
Model TVP2S
Year:1995-2017
36/42 end Creel
Superba Friseur Texturing Unit
Model MF4
Superba Fixing
Superba Steaming Tunnel 12 meter
Superba Accumulator
Gilbos Take up winders
42 ends
10-inch traverse
Auto Doffing
1x POWER HEAT ATMOSPHERIC HEAT SETTING UNIT
Year:2007
48 ends creel
6 Setting Tunnels
Frieze Texturing / Bulking heads
Accumulators
Gilbos Take up winder
Year: 2007
48 position
10 inch traverse
Automatic doffing
3 tier x 16 ends
AC94/040823/BA/
OERLIKON/BARMAG PET Filament Spinning Lines
Quantity: 9
Year: 2018
Includes Extruders, Dryers/Crystallizers, Spin pumps, Quenching, etc.
(Winders sold – balance of line available for purchase)
Installed in 2019 with very low operating hours – (some lines never put in production)
4 Lines suitable for micro denier with EVO quenching
2 Lines suitable for 100% recycled material
Production: 50 ~ 300 denier
Winder type: WINGS – 1800/12
Status: Stopped factory floor
Please see PDF file for more details.
AC03/070723/
Barmag Texturizing FK6-1000
Quantity: 8, Year: 2 x 2002 – 4 x 2003 – 2 x 2005, All v type barmag fk6-1000, 240 pos. Each, New spandex attachment, Pipe and jets are incl. W2x incl. Running condition.
AE30/130623/BA/
Barmag FK6-1000 Texturizing
Quantity: 1, Year: 2019, 288 spindles, 2 heater, Without Lycra, Including air jet nozzle; Jets on the machine are China made; TCS. Unitense; China brand; TCS, Weijing and Germany PU disc. 52mm.
AG75/300723/BA/
Barmag FK6-1000V
Quantity: 8
AG75/300723D/CLA-AO/F/BA/
6x Barmag FK6-1000V available, manufactured in 2014, 288 spindles single friction.very good condition. Air Jets are made in China.
AG75/300723D/CLL-AL/F/BA/
2x Barmag FK6-1000V available, manufactured in 2014, 2 x 240 dpindles double friction, very good condition. Air Jets are made in China.
AB46/200723E/ACI-CI/M/AN/
Barmag Draw Texturizing Machine
Quantity: 1, model AFK, positions 24, rotary creel yes, Profile V-HTI, Heater Doubleheater, Drive pressure roller, Doff automatic, intermingling yes
AB46/200723/AN/
Polyester Spinning System
Quantity: 1
Year: approx. 2000
consisting of
1 extruder 3E4
1 winding head type/winding machine
CW4T920/4
Halla 6
1 titer program 76-180 dtex
capillary count 15-72
1 single titer 1.2-10 dpf
1 throughput 0.15-0.35 tato
1 throughput 4.5-10.5 moto
Number of positions 1
Filaments / position 4
Total threads 4
1 color spinning system
(Color spinning,
Engelhardt dosing)
1 Drying 55-56+P4,6,8,9
Mixer dynamic Promix
Spinning pumps planetary gear
Barmag version
4×1,2 cm³
WT Evaporator
Elmess 167 l
Spinning beam/shaft
Barmag
Spinneret dimension D=70 mm
Spinneret setback 100 mm
godets s-Um, D=150 mm
Yarn pitch on godet
(various)
Intermingling
Plying
Number of winders 1
Number of bobbins 6
bobbin diameter 420 mm
traversing stroke 120 mm
Bobbin volume 12,4 l
Max. – Max. speed
6000 m/min
Tube length 153 mm
Tube diameter 94 mm
Last production
12/2022
AG75/230723D/CLL-AL/F/BA/
Barmag FK6-1000V Texturizing
Quantity: 2, Year: november of 2013, start working in 2014, Double friction unit machines. 2×240 spindles, Individual morter friction units, pneumatic yarn pusher, double W2 roller, unitens, very good machines.
AB46/190723D/YIL-RI/C/AR/
Oriliken Extrusion Lines with Neumag Winders
6 positions x 6 lines (5 nylon + 1 polyester converted)
Includes following:
36 Neumag winders year 2005 + 3 spare winders
6 nos of take up frames complete
Air washer – 6
TIO2 dosing systems
Boliers – 6 – 5 nylon + 1 polyester
Quench air units – 6 nos
Quench air chambers with yarn chimney – 36 pcs
Spinning beam including gear pump – 6 sets ( big size box)
6 extrusions – 5 nylon + 1 polyester converted – year 2005
Maguire dosing / blender system – 6 nos
Chips hopper – 6 nos.
Set of Fans – per set 4 fans x 6 = 24 fans
Control panels for winders + godet + extruders
Process control systems for all 6 lines
Spin trak for spinnerets checking
Acid wash tanks / ultrasonic – for spinnerets cleaning
Pack mounting trolley – 4 nos.
All types Pipings, ductings related to machines
Pack preheating ovens – 6 nos.
Extra:
Maguire dosing / blender system – 6 nos with dryer
Boilers – 9 polyester
2 chiller – 600 tr & 800 tr capacity
2 compressors
Trollies (in volkmann cabler hall)
1 extruder 2008
5 extruder 2010
48 pcs Quench cabinet with yarn chimney – polyester
Production info:
6 winder positions produce 1400 denier 2800m/min
456kg or 1003 lb Per hour
All of the switch gears and electrical transformers related to the extrusion items, will stay in the building.
AG61/030723E/ASS-AI/F/AN/
ATY SSM Taslan Air Texturizing Machine
Quantity: 1, Year: 2008, 30 pos, DP4T
Rotating creels; Yes, Feeders: 2×2, Connection: 400, Amp.: 180, BTSR sensor monitoring included,Machines ready to be dismantled.
AG61/030723E/CTO-AL/F/AN/
ATY SSM Taslan Air Texturizing Machine
Quantity: 1, Year: 2008, 40 pos
RM3T, Rotating creels; Yes, Feeders: 2×4, Connection: 400, Amp.: 20, BTSR sensor monitoring included, Machines ready to be dismantled.
AC03/300623/
RPR DX 4 Texturizing
Quantity: 1, Year: 2000/2002, Type: DX 4, Can work spun by 40 dtexes to 600 dtxes both polyestere and nylon pet.
Electronics endowed with pc that can change the form of manufacture in automatic;Can work both to an oven and to two. The machine is kept as new. 4 shaft of workmanship, position of job 84 positions for forehead, total 168, or rather every front can independently work from 84, endowed with plant for punching of the yarn to air; electronic control of the production and the quality.
AB52/220523/
Menegatto Texturizing TMA
Quantity: 1, Year: 2002, 168 position, High speed texturizing machine, 1500 mt., Type TMA for PES and PAM yarns ( from 10 to 330 Dtex )
Machine equipped with:
-168 collection positions (84 for side)
-7 sections for each side
-84 high temperature electric ovens with 2 ways (TEXTURIZING Oven)
-84 high temperature electric ovens with 2 ways (FIXING Oven)
-4 feeding shafts
-14 Special rotary creel with 24 bobbins
-168 TEMCO drive belt spindles
-1 set of sensors
-1 forced cooling system, complete with refrigeration and fume extraction
-Electronics plant complete with Menegatto software
-2 trolleys
-Manual or automatic doffing
-quality controller
AA02/260523/AR/
BCF Carpet Yarn Machinery
2x RAIL HEAD UNLOADING LINES
Each feeding:
(4) COLUMBIAN TECTANKS SILOS
92’ 11’’ Total Height
13’ 11’’ Diameter
11,620 lbs. ft3 Approx. Nominal Capacity
55 PCF Compacted Density
16 Oz/Sq In. MOP
1.16 Oz/Sq In. Vacuum
20 PSF Roof Live Load
Designed for Mass Flow Loads
Nylon/Polyester Pellets Product
Year: 2008
With:
Electrical panel
Miscellaneous piping, valves, etc.
(4) COLUMBIAN TECTANKS SILOS
94’ 6’’ Total Height
14’ Diameter
11,620 lbs. ft3 Approx. Nominal Capacity
55 PCF Compacted Density
16 Oz/Sq In. MOP
1.16 Oz/Sq In. Vacuum
20 PSF Roof Live Load
Designed for Mass Flow Loads
Nylon/Polyester Pellets Product
Year: 2005
With:
Electrical panel
Miscellaneous piping, valves, etc.
1x EXTRUDER FEEDING SYSTEM
3 Tube feeders each with 24 positions
(1) from Silos
(1) from Storage Tanks
(1) To extruders
16x POLYMER BATCH MIXING STATIONS
With positions for 4 polymer per station
EXTRUSION:
AA02/260523D/RRI-RI/M/
6x SAURER BARMAG EXTRUDERS
Model 15E1030D
Type E10
150 mm Screw diameter
4500 mm Screw length
Running nylon PA.66
Suitable for PES, PP also
Single Polymer feed
Year: (3) 2008
Year: (3) 2007
AA02/260523D/OTL-OI/M/
6x OERLIKON – NEUMAG BCF SPINNING LINES
Model S4
Year: 2005
Each line with 6 positions
Each position with 3 ends
Total 18 thread lines per spinning line
Consisting of:
(1) SAURER BARMAG EXTRUDERS
Model 15E1030D
Type E10
150 mm Screw diameter
4500 mm Screw length
Running nylon PA.66
Suitable for PES, PP also
Single Polymer feed
Year 2005
12 Spin Beams each with 3 positions
DRAWING AND BCP SYSTEM:
Each position Consisting of
1 pinch Points
1 Cold Draw Godet
2 Hot Texturing Godets with Tension roller
1 Crimper set drum 16-inch diameter
2 Heated Setting Godet Rolls
1 Celli Therm Boiler for Heat Setting
TAKE UP WINDERS
Each Line consisting of:
6 OERLIKON-NEUMAG HIGH PRODUCTION TAKE UP WINDERS
Model Witras
3-ends per winder
70 mm Chuck diameter
1000 mm Total Chuck Length
10-inch traverse
Winding speed 3000 meter per min
Bi-Rotor (Spindle)
Continuous winding
Automatic Doffing
Automatic Empty tube Transfer
Double Motor
With Drive Control
Year: 2005
AA02/260523D/YYI-YI/M/
8x OERLIKON-NEUMAG HIGH PRODUCTION TAKE UP WINDERS (offline)
Model Witras
3-ends per winder
70 mm diameter
1000 mm Total Chuck Length
10-inch traverse
Winding speed 3000 meter per min
Bi-Rotor (Spindle)
Continuous winding
Automatic Doffing
Automatic Empty tube Transfer
Double Motor
With Drive
Year: 2005
480 V, 6-Hz, 3-Phase
SPACE DYE:
4x SUPERBA SPACE DYEING UNITS
8 positions
7 positions installed
Dryer
Year: 1990/1994
CABLERS:
AA02/260523D/CAR-AS/M/
4 VOLKMANN-SAURER DIRECT CABLE TWISTER
Type 05-O-C-F
Design Type 8.02
144 spindles
Cable Creel
Air Treading
Rip cord cable stop
Tube Take-Up 10 inch
S and Z Twist
2 position Cable Creel with Pull-Down Loading
495 mm Spindle Gauge
Year: 2013
AA02/260523D/PR-P/M/
4x VOLKMANN-SAURER DIRECT CABLE TWISTER
Type 05-O-C
Design Type 5.03
144 spindles
Cable Creel
Air Treading
Rip cord cable stop
Tube Take-Up 10 inch
S and Z Twist
2 position Cable Creel with Pull-Down Loading
495 mm Spindle Gauge
Year: 2004
AA02/260523D/LI-L/M/
4x VOLKMANN-SAURER DIRECT CABLE TWISTER
Type 05-O-C
Design Type 5.03
144 spindles
Cable Creel
Air Treading
Rip cord cable stop
Tube Take-Up 10 inch
S and Z Twist
2 position Cable Creel with Pull-Down Loading
495 mm Spindle Gauge
Year: 2002 (3), 2001 (1)
5x SUPERCHANGER HEAT EXCHANGERS
Model GCD-054-L-4-HP-268
100 PSI MAWP @ 150°F
20°F MDMT @ 100 PSI
Year: 2010
18x STEELMAN CONVECTION OVENS
Model 5.532.6ETC, 29.4 kW
AH82/230523/
Complete Plant For Manufacturing Polyester Yarns
Quantity: 1, Year 1994/1995 – 2000
Continuous Polymerization (4 lines total 380MT)
Spinning POY/SDY, 75D/150D (total 28 lines)
24 Barmag Texturizing machines 216sp, single heaters,
linked with Muratec automatic packaging machines
Full automatic logistic system..
AB52/220523/
RPR Texturizing SDX3
Quantity: 1, Year: 1999, 168 position.
The texturizer SDX3 is particularly adapted to texturize PES and pam threads up to 330 dtex multi-yarn and micro-yarn and contains the base of three feeding shafts.
Numbers of the take up position 168, Number of sections 5, Position numbers of the take up for a section 24, Spindle type FTS4712, Discs’ combination 1/5/1 – 1/8/1, Type of the discs Ceramic – Polyurethan, Processable counts from 33 to 330dtex.
AB52/220523/
RPR Texturizing SDX4
Quantity: 1, Year: 1999, 168 position.
Texturing friction machine SDX4 , with special configuration “V”, suitable for the processing of fine titles and normal yarns, equipped with the rotary creel.
The machine is capable of working yarn PA and PES.
Numbers of the take up position: 168, Number of sections: 7, Position numbers of the take up for a section: 12, Spindle type FAG, Discs’ combination 171, Type of the discs Ceramic.
AH81/050523/
BCF Plant
SAURER/VOLKMANN Twister Type VTS 05-0-C, Year: 1995
SAURER/VOLKMANN Twister Type VTS 05-0-C-F, Year: 2013
SUPERBA HEAT SET Model MF4, Year: 2016
RIETER ICBT Model CD/DT 510
Very clean and in good condition.
AC94/030523/
Complete BCF Plant
2x NEUMAG/SAURER Extrusion Lines type S3 – 2010 & 2007 year
2x OERLIKON 2/1 Cabling Twisters type VTS 05-0-C – 2010 year
2x SAURER/VOLKMANN 2/1 Cabling Twisters type VTS 05-0-C – 2000 year
1x RESCH POWER-HEAT-SET Line type GVA – GILBOS Smart Take Up Winders – 2010 year
Compressors, spare parts, etc.
AC29/290423/AS/
SSM Air Texturizing DP5 – TC
Quantity: 1, Year: 2015, Type: DP5 – TC, 40 spindles, 3 codet each spindles (2 from them is hot), Jet heperlain D42, Very good condition.
Oerlikon/Barmag Draw Texturizing
Quantity: 2
AC94/310323D/LLL-RI/F/
1x OERLIKON/BARMAG Draw Texturizing Machine, Type eAFK-PET-Multi
Year: 2017
216 positions
Auto doffing
Two Diphyl heaters
Primary heater length: 2m
Secondard heater length: 1.3m
Godet/Shaft: G1/G2/G2X (G1.1)
Feed before take up: W3
Max take up package: 250mm x 250mm
Fitted with Unitens
AirJet Entangling
AC94/310323D/RYL-CI/M/
1x OERLIKON/BARMAG Draw Texturizing Machines, Type eFK-PA
Year: 2011
240 positions
Single heater "V"
Individual friction disc drive
Fitted for Lycra
Online Monitoring and Unitens Tensioning
Fitted for Airjets but delivered w/o jets
Each side independent
AC11/140423/CW/
Barmag Texturizing
Quantity: 4, Year: 2016, 216 pos., 2 heaters, Double creels, s.z function Possible to produce different yarns in LH and RH., Auto-doffing. Intermingle device included, Uniten original Barmag, No lycra feeder, Recently producing DTY 75/72, 75/36… compound yarns, even though could produce high quality special yarns with s z function for 24 hours 365days running without breakdown. Machines Still working in production & very good condition.
AB10/140323D/LLT.L-RT.L/M/CA/
Barmag eAKF-PET Multi Texturing
Quantity: 1, Year:2017, 216 pos.
2 heaters, double creels
s.z function, auto-doffing.
Lycra feeder not included, as they thought productivity so low if running with lycra device.
Uniten original Barmag.
Possible to produce different yarns in LH and RH.
Still running.
That factory is commissioning company just only for tezturizing.
Recently producing 300, 450, 600 deniers heavy compound yarns, even though could produce high quality special yarns with s z function for 24 hours 365days running without breakdown.
For example based on 300den now producing around 210~230mt average per month. If 600den, production q’nty must be more.
Factory decided to try to sell the machine due to recent electricity cost shock.
AA23/140323/BY/
GUIDICI AIR TEXTURIZING MACHINE
Quantity: 1, Year: 2000, Model : RGTA , Number of positions – 12, Nozzles Heberilein A 317-2+, Delivery to standard bobbins of 300 mm long
Speed – 450 m/min, Type of yarn – PES, Count range : dtex 80-dtex 380, Max number of yarns – 8, Machine on mill floor
AA23/210223/AZ/
Starex Starlinger Extrusion Line
For PP tapes with winder of 250 positions
Composed of: sizing unit, nozke dia 90mm , drafting zone, cutting zone into tapes , cooling streching area, cooling godgets 5 set
Winder for 248 positions of 3 types of tubes: dia inner 90 mm and 230 mm long or 280 mm long and special tubes for Starlinger circular looms dia 38 mm and 220 mm long. Output to 350 kgs/ hr
1x FOIL TAPE LINE STAREX- model 90/1000
Year: 1996 , Overall dimensions: lenght 39535mm, width 3835mm, height 4633mm
w. width 1000mm, Speed of machine 60m/min, Output – 350 kg, dia of screw 90mm, length of screw 30D, Number of heating zones 5, control heating zones 2, ( 2 drawing and 3 cooling godgets, Power Condition 3×380 V/50Hz
CHANGEABLE CORE DIAMETER ON WINDER ( 38 mm dia – just for LOHIA circular looms creel !; or ‘regular “ 90 mm dia)
Wastes collection into special container in end of the line.
Fibrilization of tapes available on attachment in line.
Composition
1. DOSING UNIT
2. EXTRUDER with 90 mm dia nozzle
3. MELT PUMP WITH DRIVE
4. WIDENING ATT. – 1000 mm max width
5. COOLING BATH
6. WATER /HUMIDITY EXTRUCTION ATT.
7. CUTTING DEVICE
8. OVEN – DRAFTING SYSTEM ( 4 meter long )
9. FIBRALIZATOR
10. GODGETS – 5 pcs
11. WASTE – SUCTION UNIT
12. CONTROL CABINET
13. WINDER OF 250 SPINDLES ( SINGLE WINDING – 1 tape on one spindle) model FIL 23 YOC 1998.
14. WASTE CONTAINER
15. SET OF SPINDLE CORES 35 MM DIA AND 90 MM DIA ( INNER)
Max tape thickness – 0,110 MM MAX
Width of tape minimum – 1.1 mm after drafting
Bobbin inner and outer diameter – 90/100mm, ( or 35/45 mm for Lohia circular looms shuttles)
Bobbin length 280 mm, max dia of full package – 250mm
Including fibrilator.
Max output – 350 kgs/h
3x LOHIA STARLINGER BIG BAG CIRCULAR LOOMS – LSL 630
Year: 2007
Excellent condition, 100% complete & working
Each with Double batcher winder (up/down)
Sleeve cutting system (razors, guides and control measure system)
System of water coating for fabrics surface
Diameter – 101.5 cm
6 shuttles type
Speed up to 90 rpm ( practical output 600 running meters per shift of 8h)
creels for max 1344 bobbins.
Machines all complete & running.
Line working until Mid May 2022.
AH74/130223E/LA-L/M/AQ/
Giudici Taslan Machine
Quantity: 2
Year: 1994, Model TG30 TA , with 80 positions and
Year: 1990, Model RTG, with 36 positions.
One is an automatic reel change and the other is a manual change.
AE56/130223D/ATS-AY/F/
Barmag Texturing
Quantity: 1, Year: 2011, 240 spindle, Double heated, 240 spindle, No nozzle.
AE56/130223D/AIS-AI/F/
Barmag Texturing FK6-V-1000
Quantity: 2, Year: 2010, 240 spindle, Three roller, With nozzle, Running condition.
AG75/120223D/CAO-AO/F/BA/
Barmag FK6-1000V Texturizing
Quantity: 2, Year: 2011, Double friction unit machines, 2×240 spindles, Individual morter friction units, Pneumatic yarn pusher, Double W2 roller, unitens, Very good machines, Just stopped.
AH27/100223D/ST-AC/F/BA/
Barmag Texturizing FK6-1000
Quantity: 1, Year: 2010, 240 spindles, With Chinese brand air jet nozzle, Machines are double heater but not double friction.
AC86/300123/
Taslan Air Texturizing RTG
Quantity: 1, mod. RTG, No of positions: 36, Manual change of bobbins, Computer controlled, Each position has independent motor, Heberlain nozzles for maximum quality, Workable Counts: from 300 dtex up to 2500 dtex (final count)
AB08/180123/BJ/
COMPLETE BARMAG BCF PLANT
AB08/211022E/ALI-AI/M/BJ/
BARMAG BCF PLANT
Quantity: 1, Year: 1994, TYPE STM 16 PP
ELECTRICALLY AND ELECTRONICALLY UPGRADED IN 2015
Denier range: 1600 to 2400 Dtex (Carpet yarns)
Spinning Speed: 1400 – 2000m/min
Capacity: 2 ton/12hr
Tri colour, 6 Positions (2 ends/position)
Polymer silos with vacuum system
Polymer extruders with independent vacuum system
3 Polymer extruders (Electrically heated)
3 Colour Side extruders (Electrically heated)
3 colour metering units
Air Quenching (heating/cooling)
Spinfinish mixing station
Pre- heat oven
Dowtherm heating system for the spinning beams
Complete chilled water system includes chiller unit
2 x 11 bar Broomwade Air Compressors (193kW each)
Complete electrical panel setup
AB08/211022/BJ/
RIETER CABLING MACHINES (CD/DT 510)
Quantity: 2, Year: 2002, 120 spindles each
AB08/211022E/TL-L/M/BJ/
SUPERBA HEAT SET PLANT, TYPE TVP2S
Quantity: 1, Year: 2000, 48 Spindle creel, MF4 Frizzing box, HEP ( Pre- steamer), 12m steaming chamber
ARG-M Control system, Pre feeding device, Dryer - STV, BLA winder - 48 position automatic
AB08/211022/BJ/
EVILO REWINDERS
Quantity: 2, Year: 1999, 2 Winding heads per machine
AB08/211022/BJ/
KARL MAYER REWINDER
Quantity: 1, Year: 1999, 2 Winding heads
LAB AND TEST EQUIPMENT
Plant is still fully installed.
AC29/130123D/CSI-CI/M/AS/
SSM Texturizing DP5-TC
Quantity: 1, Year: 2019, 40 spindles, 3 codet each spindles, Jet Heprline, Its Suitable for PP Yarn and FDY polyester, Not Suitable for poy, Machines are without Lycra device and without Jets, Machines can do Naylon and FDY.