AE02/071124/
Karl Mayer Warper OOM 3600
Quantity: 1, Year: 2003, ww. 3600 mm, with creel GP-W-720 (720 pos)
AB60/041124/
Karl Mayer Sectional Warping
Quantity: 1, Year: 2005, Type OOM 3600, for beams maximum 3600mm and diameter max. 1250mm, sizing box ROTAL WDHT 3900 year of construction 2005, Creel 1 : make Karl Mayer type GM 546-7 year of construction 2001, used for carpet industry PE/Co and filament, Bobbins max diameter 250mm, capacity 546 positions but only 448 working positions (273 + 175), Creel 2 : make Matthijs year of construction 2010, used for upholstery industry, 768 positions, 16 trolly’s with each 24 (6x 4) x 2 positions, distance between spindles 340mm horizontal 330mm vertical, spare set of 16 trolleys.
AC03/210624/
Benninger Sectional Warper
Quantity: 1, Year: 1996, Mod. BEN-ERGOTRONIC, Working width 3400 mm, Conicity 1:5/1050, mechanical leasing reed, beaming unit, waxing device, pressing roller.
Benninger creel TYPE GM-W/GZ, 560 positions, pitch 27 x 27 cm, 8 floors, with 7 working trolleys and 14 trolleys of spare. Delivery: JANUARY 2025.
AB46/301024/
FOUR STAR SECTIONAL WARPER
QUANTITY: 1, YEAR: 2021 , 540cm width, WARPING SIM LENGTH DRUM & WARPING TABLE LEASING DEVICE S-ROLLER SYSTEM & CONTROL (LASER DETECTOR);
CREEL 388 STATIONS;
BEAMING OFF STATION & PROFACE CONTROL & MAIN POWER BOX, 384 pos.w. Reserve,
motorized arm tension adfj. And side to side motorized movement,
AA10/180924/
CCI Sample Warper
Quantity: 1, Year: 2005, Model LUTAN, Width: 2m20, working width: 1m90, Fix and rotary creel (12 bobbins), max. warp length: 180 meters.
AA10/180924/
Karl Mayer Sample Warper
Quantity: 1, Year: 2004, Type GOM 16 , warping width 200 cm, Circumference: 7 m, pre-draw-off drum speed: 60 m/min, maximum speed:1200 m/min. waxing device, max. warping length: 700 m
AB82/190824/
Sucker-Müller / Hacoba Sectional Warper
Quantity: 1, Year: 1998, Type USK2000, working width 220 cm,Beaming max. for flanges 1.000,
Waxing device, with warping creel, 400 spindles, pitch 23/25 cm,
plate-type brake,Stüber Sensostop SG 1500 E stop motion
AE02/040624E/TTL-RI/C/
Karl Mayer Direct Warper WD 2800 / 1000
Quantity: 1, Year 2019, ww. 2800 mm, V-creel, 714 positions
AA10/270724/
VTA Sectional Warper NC 850
Quantity: 1, Year 2003, working width 3m40, with 2 creels of 600 ends each, pitch 280 mm, 2 sets of trolleys
AA02/200724E/TRT-YI/F/AN/
Warp Sizing Installation
1x KARL MAYER Direct Warper
Type WD 2800/1000
Year of manufacture 2019
Working width 2800 mm
Max. Beam Flange Dia. 1000 mm
with:
KARL MAYER V-Creel,
714 Live ends
Vertical Package Centers 320 mm
Horizontal Package Centers 305 mm
Automatic Transfer Cutters
80x SECTION BEAMS with Coned Geared Drive Ends
2800mm Warping width
1000mm Flange Diameter
1x BENNINGER-ZELL Sizing Machine
Year: 2021 rebuilt (Original Frame 1997)
Headstock working width 4000 mm
Maximum Barrel Length 4300m
Maximum beam diameter 1500mm
with (2) Creels each for 28 Beams, 100mm dia.
12 Drying Cylinders
2 Size Boxes, Double roller, Double dip
Working width of Size boxes 2800mm
Mahlo & Pleva Microwave Measuring
ALL NEW Electrics in 2021
Including Input devices new and Siemens S7 PLC Controls
1x BENNINGER Automatic Size Kitchen
Model BEN-Sizemix
Year: 1997
Stopped mill floor.
NOTE:
Machines are dismantled in warehouse in Europe.
AC03/210624/
Benninger Sectional Warper
Quantity: 1, Year: 1989, Mod. Supertronic Retrofitted by Bromas for technical yarns. Working width 2200 mm, year of construction 1989, cone length 1600 mm conicity 1:8. Beaming unit for flanges diameter up to 1000 mm, with waxing device and pressing roller. (pressing roller available but to be mounted on the beaming unit). Without creel or with KARL MAYER Creel mod. GM, year 1996, 400 positions head-tail, pitch 36 x 24 cm (but not suitable for technical yarns)
AC03/210624/
Benninger Sectional Warper
Quantity: 1, Year: 1990, Mod. SUPERTRONIC, Working width 2200 mm, Cone length 1700 mm, conicity 1:8. Beaming unit for flanges diameter up to 1000 mm, with waxing device. BENNINGER electronic creel 400 positions head-tail, 8 floors, gauge 46 x 25 cm.
AC03/210624/
Benninger Creels
2x BENNINGER Creels 960 positions each, pitch 24 x 24 cm, with revolving panels, year 2004.
1x BENNINGER Creel 320 positions head-tail, 8 floors, horizontal pitch 540 mm, vertical pitch 240 mm, year 1997.
AC03/210624/
Fattori Sectional Warper
Quantity: 1, Year: 1990 approx, Working width 2200 mm, Drum with metal bars, Conicity 1/5, cone length 103 cm, Semi automatic leasing reed, with 1 reed of spare, Beaming unit with waxing device, Creel 360 positions head-tail, 6 floors, horizontal pitch 27 cm, vertical pitch 29 cm.
AC03/210624/
Benninger Sectional Warper
Quantity: 1, Year: 1995, BEN-SUPERTRONIC, Working width 4000 mm, Conicity 1:8, cone length 1710 mm, Beaming unit with pressing roller suitable for flanges up to 1000 mm diameter. 2 automatic leasing reeds Bensplit, Antistatic bars, 2 BENNINGER Creels 640 positions each, 8 floors, with opening walls, pitch 270 x 270 mm.
AC03/210624/
Suzuki Sample Warper NAS-130
Quantity: 1, Year: 1996, Working width 2000 mm, Drum circumference 7 mt, Rotational creel 8 colors with 8 weft feeders, Standard creel 10 colors with 8 weft feeders, beaming unit, Ordomat pc, Max warping length 210 mt depending on articles.
AE64/080323/
Suzuki Sample Warper
Quantity: 1, Year: 2001, NAS-300, Working width 2250 mm, Drum circumference 10 mt, Rotational creel 8 colors with 8 weft feeders, Standard creel 10 colors with 10 weft feeders, Warping system with the 2 creels working in combination, Beaming unit with waxing device, External pc.
AH42/240723E/RC-Y/C/AQ/
Suzuki Sample Warper
QUANTITY: 1, YEAR: 1995, NAS-130, W:2250,, ROTARY CREEL FOR 8 COLORS, WARPING LENGTH +/- 200MT , YARN SPEED: 300-1500 M/MIN MAX, STANDARD CREEL 10 COLOURS, 8 PREFEEDERS, ROTARY CREEL 8 COLOURS, 8 PREFEEDERS, STATUS: WORKING
AE64/191023/
Suzuki Sample Warper Mod. NAS-140
Quantity: 1, Year: 2000, Working width 2250 mm, Drum circumference 7 mt.
Equipped with: Rotational creel 8 colors with 8 weft accumulators Roj Dart, With pneumatic yarn draw back system, Standard creel 10 colors with 10 weft accumulators Roj, Chrono, with stop motion, with pneumatic yarn draw back, System and with electronic stop signal in case of yarn, Breakage, Warping system with combined creel, Beaming unit, Waxing unit, Computerized system, Max. warping length 420 mt depending on articles.
AE64/070524E/OL-L/F/
Karl Mayer Sample Warper
Quantity: 1, Year: 2005, Mod. GOM-16, Working width 2250 mm, Rotational creel with 16 weft feeders, Automatic leasing device for initial and final even and odd separations, Single beaming unit (without waxing device), Pc on board with touch screen + external pc, Status : running, Machine is in excellent conditions.
AE64/020524/
Suzuki Sample Warper
Quantity: 1, Year: 2006, Mod. NAS-140CS, working width 2250 mm , drum circumference 7 mt, equipped with :
Rotational creel 8 colors with 8 weft accumulators Roj Dart, with pneumatic yarn draw back system
Standard creel 10 colors with 10 weft accumulators Roj Chrono, with stop motion, with pneumatic yarn draw back system and with electronic stop signal in case of yarn breakage
Warping system with combined creel , Beaming unit , Waxing unit
Computerized system, Max. warping length 420 mt depending on articles
AE64/150223E/CA-Y/F/
Sucker Muller Hacoba Sectional Warper
Quantity: 1, Year: 1996, Mod. KSE-R (USK-T PC), working width 250 cm
conicity 1:5, cone lenght 152 cm
beaming unit with waxing device, leasing reed
Creel 480 positions, 8 floors, horizontal pitch 51 cm, vertical pitch 24 cm (factory is working bobbins 27 cm diameter)
AB60/060424/
Karl Mayer Direct Warper
Quantity: 1, Year: 2000, Type ZM-SP 1800/1250 , Working width 1800mm, warp creel 840 bobbin positions, Max. Speed: 1200 RPM, Total creel trolleys: 3 sets consisting of 14 trolleys (1 set in machine and 2 sets for preparation), Machine can take D= 800 to 1250 mm warp beams, cutting device, Including : 20 pieces beams of 1800 mm D= 800 mm aluminum flanges, for max. bobbin diameter 280mm, gauge 33×32.
AB52/290524/
BENNINGER Creel
Quantity: 1, Year: 1998/1999, BENNINGER CREEL for sectional warpers ;
serial number 105206/254; capacity 600 bobbins. (with rotating panels of 300 +300 positions and reserve) .
Equipped with automatic tensions control ;
350 mm bobbin gauge; suitable for processing polyester/polyamide fibers;
AB64/020524/AO/
Dornier Looms & Warpers
1x Dornier PTS 8/J 190 , Year: 2004, Jacquard SX 2017, 2688 hooks, JC7.
1x Dornier PTS 8/J 190 , Year: 2004, Jacquard SX 2017, 2688 hooks, JC7, Controller.
1x Dornier HTVS 4/J 180 , Year: 1997, Jacquard LX 1600, 3072 hooks, 1999.
1x Dornier HTVS 4/J 180 , Year: 1997, Jacquard LX 1600, 3072 hooks, 1999.
1x Dornier HTVS 4/J 180 , Year: 1997, Jacquard LX 1600, 3072 hooks, 1998.
1x Dornier HTVS 4/J 180 , Year: 1997, Jacquard CX 870, 2688 hooks, 1999.
1x Dornier PTV 8/J 170 , Year: 2005, Jacquard LX 1600, 3072 hooks, 2004, M4.
1x Dornier PTV 8/J 170 , Year: 2004, Jacquard LX 1600, 3072 hooks, 2004, M4.
1x Suzuki NAS 7-S , short chain shearing rollers, Year: 1993, 6 weft accumulators ROJ, 2 Bobins.
1x Suzuki NAS 6 , short chain shearing rollers, Year: 2008, type: 2250, rotating & fixed shaving rack, 18 weft accumulators.
1x Dornier HTV 8/J 190 , Year: 1992, Staubli CX 870, 2432 hooks, Year: 1999.
1x Dornier HTV 8/J 190 , Year: 1992, Staubli CX 870, 2432 hooks, Year: 1999.
1x Dornier HTV 8/J 192 , Year: 1992, Staubli CX 870, 2432 hooks, Year: 1999.
1x Dornier HTV 8/J 190 , Year: 1992, Grosse EJH-II, 2688 hooks, Year: 2002.
1x Dornier HTV 8/J 190 , Year: 1992, Grosse EJH-II, 2688 hooks, Year: 2002.
1x Dornier HTV 8/J 190 , Year: 1992, Grosse EJH-II, 2688 hooks, Year: 2002.
1x Dornier HTV 8/S 190 , Year: 1989, Grosse EJP-I, 2432 hooks, Year: 1992.
1x Dornier HTV 8/J 190 , Year: 1994, Grosse EJP-I, 2688 hooks, Year: 1994, dubble chair.
1x Dornier HTV 8/J 190 , Year: 1994, Grosse EJP-I, 2688 hooks, Year: 1994, dubble chair.
1x Dornier HTV 8/J 190 , Year: 1995, Grosse EJP-I, 4832 hooks, Year: 1995.
1x Vamatex Leonardo 190 , Year: 2000, Staubli LX Super Jumbo, 9632 hooks, Year: 2000.
1x Dornier PTS 8/J 170 , Year: 2007, Bonas MJ6 MO628, 4832 hooks, Year: 2007.
1x Dornier PTS 8/J 170 , Year: 2007, Bonas MJ6 MO628, 4832 hooks, Year: 2007.
1x Dornier PTS 8/J 170 , Year: 2007, Bonas MJ6 MO628, 4832 hooks, Year: 2007.
1x Dornier PTS 12/J 170 , Year: 2008, Staubli LX 1602, 4832 hooks, Year: 2008.
1x Dornier PTS 12/J 170 , Year: 2008, Staubli LX 1602, 4832 hooks, Year: 2008.
1x Dornier PTS 12/J 170 , Year: 2010, Bonas L0628, 4832 hooks, Year: 2010.
1x Dornier PTS 12/J 170 , Year: 2010, Bonas L0628, 4832 hooks, Year: 2010.
1x Dornier PTS 12/J 170 , Year: 2011, Staubli LX 1602/W10/8V, 4832 hooks, Year: 2010.
1x Dornier PTS 12/J 170 , Year: 2011, Staubli LX 1602/W10/8V, 4832 hooks, Year: 2010.
Benninger warp/weft, Type: Ben Tronic, Year: 2000, 50/60 Hz.
Uster UMM
Uster UMM
Knotex met display
Knotex znd display
Topmatic TPM201
Ficher Poege
Compressor Boge
Spare parts
AB46/160524D/SL-AI/F/
Karl Mayer NOV-O-Matic Short Warp Length, Sample Sectional Warper
Year 2011, Type NOM 2200, Voltage: 400v , 60 hz/3 phase, Including automatic leasing device, With the ability of using up to 10 lease separation cords for color bands separation. Including LASER band build- up control system. Maximum warp beam width 2,200 mm or 86.5 “, Maximum warp beam flange size is 800 mm. Small number of yarn packages needed for banding of small color sections, With speed capable of up to 1,000 meters per min. Includes a warp waxing device for unsized warp needs capable of 200 meters per min. In the beaming process. The creel is not included with this warper. Its in warehouse.
AB08/160524D/LA.L-AI/F/BJ/
KARL MAYER SECTIONAL WARPER
Quantity: 1, Year: 1998
Yarn processed: PES from 100 to 400 Dernier, Type: BAND-O-MATIC
Model: BOM 2400, Working Width: 2’400 mm,Beam Dia: 1’100 mm
Creel Model: GD-M-704, swivel
Creel Capacity: 704 positions , in use only 670
Creel pitch: 270 mm
Tensioner Type: KFD2
Tension Control: 55 cN max
Max warping speed: 800 mtrs / min
Note: Machine is 100% complete, still fully installed and occasionally still used.
AE64/020524/
BENNINGER Sectional Warper
Quantity: 1, Year: 1995, Mod. BEN-SUPERTRONIC, working width 4000 mm
conicity 1:8, cone length 1710 mm,
beaming unit with pressing roller suitable for flanges up to 1000 mm diameter.
2 automatic leasing reeds Bensplit
antistatic bars, 2 BENNINGER Creels 640 positions each, 8 floors, with opening walls, pitch 270 x 270 mm
AE64/020524/
BENNINGER Sectional Warper
Quantity: 1, Year: 1997, Mod. BENMATIC, working width 2200 mm
cone 1:8 / 1450, leasing reed Bensplit,
beaming unit with waxing device and pressing roller.
BENNINGER Creel 320 positions head-tail, 8 floors,
horizontal pitch 540 mm, vertical pitch 240 mm.
Visible machine in operation, ready for delivery.
AE56/180424/
Benninger Warping Machine
Quantity: 1, Year: 2013, width 180cm, 880 spindle, can test running
AB34/080324E/YC-R/C/
Hacoba Cone Warping
Quantity: 1, Year: 11-1994, Model: USK S1000 KSER, Working width: 1800 mm (max. 1900 mm)
AC94/010324/
Suzuki Sample Warpers
Quantity: 2
1 x Type NAS 200S – 1999 year
1 x Type NAS 130S – 1997 year
8 positions rotary creel
10 positions fixed creel
AC94/010324D/RA.L-C/F/
NAS 200S
AC94/010324D/CL.L-C/F/
NAS 130S
AC94/010324D/CL.L-C/F/
Sucker Muller Hacoba Sectional Warper
Quantity: 1, Year: 1998, Type USK-S/BM , 2250mm width, 576 end creel.
AC94/010324D/CR.L-C/F/
Karl Mayer Sample Warper
Quantity: 1, Year: 2003, Type MSK, 12 colors, Individual creel for single color insertion, Waxing.
AE70/270224D/CR-O/M/AR/
Sucker Muller Hacoba Direct Warping
Quantity: 1, Year: 1998, Model USKS/BM, 230 cm on the drum, Creel with 976 ends
NOTE: machine requires 1×40′ ctr for shipment
AA10/260224D/SL-AI/M/
KARL MAYER Rotal Direct Warper
Quantity: 1, Year 2012, Model RKU, Maximum width 250 cm, With creel
AC86/200224/
Benninger Warping
QUANTITY: 1, YEAR: 2004, TYPE BEN MATIC 1, H 2200mm, CREEL TYPE GAAB/GZB, YEAR 2004, BLOWER, NUMBER 880 POSITIONS, 240×240 GOUGE.