AA23/251125/BA/
Tuftco Tufting Machine
Quantity: 1, Year: 2000, made in USA, Weight: 3 Tons, Gauge: 1/8 – 1/4, Multi-Tuft Loop, Product Type/Range: 156 – 218 PH, Working Width: 2m, Number of treads: 12. Machines are in China, but are managed and owned by European company.
AB64/091224/
Sulzer Looms for Primary Backing & Yarn Extruder
Sulzer Looms for “””PRIMARY BACKING””
Quantity: 20, Year: between 1988 and 1991, Type: P 7100, Working Width 430cm, High Quality
Barmag Extrusion 10
Year: 1988- 1991
350kg/h, 300m/min, 227 Barmag wrappers with 330 mm length tubes, Retrofit Siemens control S 7 – Profinet
120 cm width film, New extruder motor on alternating current, Filter, Cooling roller (no bath), 17 needles per cm
Barmag Extrusion 12
Year: 1988- 1991
350kg/h, 300m/minute, Gravimetric dosage, Retrofit Siemens S 7
Water bath cooling, 199 position on winder with 330 mm tubes, 30 needles per cm, Horizontal fibrillators
Barmag Extrusion 15
Year: 1988- 1991
Stands still for 2 to 3 years, Vertical fibrillators, Retrofit Siemens S 7, New cooling roller
No filter, All engines new and on alternating current, 175 winders (5 missing), Length of tubes 400 mm
AB64/141025/AO/
Cobble Tufting Machine
Type: ST 91 Sprint, Year: 1994, 1/10″ Loop pile(RH) 5m, Pile H: 4-10, Straight, Jute mover, P.I.V.
AB64/141025/AO/
Cobble Tufting Loom
Quantity: 1, Year: 1994, Type ST 91, 3/16 cutloop RH, Width 240 cm, Pile H: 5 – 24, Straight P.I.V. bathmats, Reconditioned.
AB64/141025/AO/
CMC Tufting Loom
Quantity: 1, Year: 1994, 3/16 cutpile RH, Width 500 cm, Pile H: 5 – 24, Straight SSN P.I.V. grass.
AB64/141025/AO/
Tuftco 3/8 Cut Tufting
Quantity: 1, Year: around 2000, ww: 5,1 m but 4,1 m production, Type: C2003 – Cut SSN, Pile height: 25-41 mm : can go up to 50 mm, Speed: 400 RPM.
Including: Controll-panel, ELTEX YARNCONTROLL, PB unwinder, Creel (2 levels), rotating creel, (no winder). Spare-parts.
Specs: Needlebar with needles + knife bar for 3/8″ missing, knife blocks available.
Needlebar with needles + knife bar with knife blocks for 3/16″ available.
Inspection frame available, not installed.
Roll-up winder available, not installed.
AB64/141025/AO/
Cobble 3/16″ Loop Tufting
Quantity: 1, Year: 1992, WW: 4 m, With unroll / Creel / Inspection / Roll-up winder & controll panel, pile H 5 – 24, Straight SSN P.I.V.
AB74/250925/AX/
COBBLE ST91 Graphics
Quantity: 1, Year: 1996, 1/10″ gauge, Cut pile, Double sliding needlebar by cam, Double sided yarn feed
Servo yarn feed, Servo cloth feed, 5m working width, Dropper system
AB74/250925E/TR-L/F/AX/
COBBLE ST91
Quantity: 1, Year: 2000, 1/8″ gauge, Cut pile, 5m working width, Servo yarn feed
Servo cloth feed, Single sliding needlebar by cam, Dropper system, Protechna camera system
Please note:
1- This is indeed not a Graphics machine as this machine only had a single sliding needlebar.
A Graphics machine has a double sliding needlebar for designs.
This sliding needlebar is mainly used as a streak breaker when you have yarns that cause stripes in the Carpet.
So this Carpet looks like a Standard plain cutpile Carpet.
2- Requires 1x 40′ HC for shipment.
3- The offer consist of Tufting machine only.
4- Ancillary equipment like an inspection frame and reroller can be added at extra charge.
AB74/250925/AX/
TUFTCO Servoscroll
Quantity: 1, Year: 2003, 1/10″ gauge , Multi Lvl Loop, Servo scroll, 264 motors, DSYF, 5m working width
AB64/230625E/LS-O/F/AO/
Cobble Tufting ST91
Quantity: 1, Year: 1994, Type: ST91, Gauge 1/10, loop pile, Straight with jute mover , Including inspection frame, rollup, yarn detection and creel.
AB64/200625/AO/
High Quality Babcock Tufting Complete Finishing Line
ETF part 1996
Babcock part 1998
Küsters part 1998
Documentation of line available (Babcock / ETF)
Auto cross lapper Matthys (2014) :
J-box
Wash installation Küsters (incl Robushi pumps)
Centering frame
Drying zone Babcock (after wash installation) 10 fields
Mahlo measurement of weight applicated compound
Precoat applicator (fixation of tufted piles)
Drying zone Babcock after precoat application 18 fields
Babcock main control panel
Foamtable / application glue for secondary backing
Unwinding secondary backing
Kashier installation for gluing secondary backing to carpet
Drying zone Babcock after foam application 20 fields
Cooling zone
Cutting edges
Compensator before inspection table
Inspection table
Centering frame
Compensator (fix an d variable) before cutting and winding ETF
Centering frame
Cutting / winding / packaging ETF
AB74/250925/AX/
TUFTCO
Quantity: 1, Year: 2002, 1/8″ gauge, Cut pile, 5m working width, Servo yarn feed, Servo cloth feed, Single sliding needlebar by cam, Dropper system, Protechna camera system
AI37/160525E/RC-O/M/AW/
Tufting Testing Machines
Quantity: 1, As total package, Please see pictures for details
AF12/140525E/RS-Y/F/AX/
Cobble, Pickering, ITS Tufting Machines
Quantity: 5, Year: 1985 (Est), W. Width: 2500mm (x1), 5000mm (x4), Creels: 2700 ends, Gauge: 5/64, Pile: Cut Pile (Max pile height 30mm), Steaming: Integrated on each machine, Accumulator, Wind-up: Batching rolls, 2.5m Machine includes a bank of infrared heaters, Electrical Supply: 3 Phase 380-440v, 50Hz.
Spare parts: All related spare parts and accessories available in the factory (If any). Manuals: All manuals available in the factory (If any). Currently being used in the production of: Tufted Nylon Carpet (Usually for the automotive industry), Fully re-furbished since date of manufacture, Status: Still operating and can be seen running. Condition: Complete and in good working condition. Transport: 1 x 40ft Container per machine (Estimated).
AF12/140525E/RS-Y/F/AX/
Cobble, Pickering, ITS Tufting Machines
Quantity: 2, Year: 1985 (Est), W. Width: 5000mm, Gauge: 1/10th Gauge, Pile: Cut Pile (Max pile height 30mm), Steaming: Integrated on each machine, Accumulator, Wind-up: Batching rolls, Creels: 2700 ends, Electrical Supply: 3 Phase 380-440v, 50Hz.
Spare parts: All related spare parts and accessories available in the factory (If any). Manuals: All manuals available in the factory (If any). Currently being used in the production of: Tufted Nylon Carpet (Usually for the automotive industry), Fully re-furbished since date of manufacture. Status: Still operating and can be seen running. Condition: Complete and in good working condition. Transport: 1 x 40ft Container per machine (Estimated).
AB74/120525/AX/
Grass Tufting Factory
AB74/120525E/RP-AI/M/AX/
Tufter – Supplied by TMS circa 2006, refurbished by Danley 2024
5/8 Gauge
4.04m maximum tufting width.
PIV driven dual yarn feed rollers (front) 6” rollers
PIV primary backing feed
Manual Bed
Pile height range 35mm to 65mm
Stitch range 120 – 270 per lin metre
Module knife blocks. 1mm thick knifes.
Running speed 350rpm maximum
Manual Primary Backing Lifter/stand.
Mending frame with lapper.
3/16 magazine creel.
AB74/120525E/YI-AI/M/AX/
Tufter – Supplied by Thom Eng circa 2000.
3/16 gauge.
4.03m max tufting width
DC Drive system
PIV driven single yarn feed rollers (front). 4” rollers
PIV primary backing feed
Manual Bed
Pile height range 7mm to 18mm
Stitch range 150 – 360 per lin metre
Module knife blocks. 1mm thick knifes.
Running speed 350rpm maximum
Manual Primary Backing Lifter/stand.
Mending frame with lapper.
3/16 Magazine creel.
AB74/120525E/RL-AI/M/AX/
Tufter - Supplied by Thom Eng circa 2004
5/8 Gauge
4.04m maximum tufting width.
PIV driven single yarn feed rollers (front) 6” rollers
PIV primary backing feed
Manual Bed
Pile height range 35mm to 65mm
Stitch range 120 – 270 per lin metre
Module knife blocks. 1mm thick knifes.
Running speed 350rpm maximum
Manual Primary Backing Lifter/stand.
Mending frame with lapper.
Double storey 5/8 magazine creel.
AB74/120525E/RP-AI/M/AX/
Tufter – Supplied by TMS 2021
5/8 Gauge
4.05m maximum tufting width.
PIV driven single yarn feed rollers (front) 6” rollers
Estex end out detection system
PIV primary backing feed
Manual Bed
Pile height range 35mm to 65mm
Stitch range 120 – 270 per lin metre
Module knife blocks. 1mm thick knifes.
Running speed 400rpm maximum
Manual Primary Backing Lifter/stand.
Mending frame with lapper.
Single storey 5/8 magazine creel.
Tubed to wide bore tubing.
AB74/120525E/ARI-AI/M/AX/
Coating Line
Supplied by Gyson/CTS Australia
Installed and commissioned Feb 2001
Overall length 35.5m. Maximum width 5.6m. maximum height 4.5m
Designed for the coating of artificial turf with SBR Latex.
Dohle Ultra Super butt seamer sowing machine.
J bin with electrical side shift.
Latex pump and foamer with compressed air input ports. Water cooled.
Direct coater, roller over roller design. Water chilled application rollers, upper roller height adjustable. Auto tracking latex weirs. Traverse latex feed. Driven turf pretension system.
Normal running Latex dry weight application of 700g/sqm at 1.8 linear metres per minute. Latex dry application weight of 1000g/sqm at 0.9 linear metres per minute.
Auto tracker stenter wings, leading to fixed track section.
5 x Black tube LPG gas heater units.
LPG gas fired recirculation oven, 4 chambers, split into separate upper and lower zones. Upper zones for heated air, lower zones with external forced cold air feed. (8 zones)
Hot solder tipped irons for turf perforations. Adjustable hole frequency, timing auto linked to line speed.
Turf Accumulator, auto anti-drop and carriage guiders.
Up and over turf carriage frame.
Measuring station and inspection floor.
Crosscut and auto feed to Roll up unit.
Rollup unit, with independent roller drives.
Fully Operational.
The machines have been running until First of May.
AB74/120525/
COBBLE ST91 Graphics
Quantity: 1, Year: 1998, 1/10″ gauge, Cut pile, Double sliding needlebar by cam, Double sided yarn feed, Servo yarn feed, Servo cloth feed, 5m working width, Dropper system
AA91/090425D/LC.L-Y/F/AR/
Tuftco 5/64th Gauge Single End Servo Scroll Sample Tufting Machine
Quantity: 1, Year: 2002, 5/32nd gauge front and rear.
AB64/260325/
Cobble 3/16″ Cut Loop Tufting
Quantity: 1, Year: 1993, WW: 4 m , With unroll / Creel / Inspection / Roll-up winder & controll panel.
AI37/130225E/OL-AI/M/AW/
Cobble Pantera Tufting
Quantity: 1, Year: 2003, Gauge 1/10, Loop Pile, Type PANTERA, Equipped with 8 creels (building 40), This machine is 500cm width but was producing 200cm width and need a set loopers, needles and fingers then ready for production of 500cm width.
AI37/130225E/AAL-AI/M/AW/
Cobble Pantera Tufting
Quantity: 1, Year: 2001, Gauge 1/10, Cut Pile, Type LXIII PANTERA, Equipped with 8 creels (building 40), This machine was producing 200 cm width but machine width is 500 cm.
AI37/130225E/OI-AI/M/AW/
Cobble Pantera Tufting
Quantity: 1, Year: 1998, Gauge 1/10, Loop Pile Type PANTERA RECALL, Equipped with 5 creels (building 38), This machine is 500cm width and ready for production on 500 cm.
AB64/180225/
CMC 1/8 Cut Tufting
Quantity: 1, Year: 2004, ww: 4,1 m, Type: C2003 – Cut SSN, Pile height: 4 – 12 mm, Speed: 900 RPM.
Including: Controll-panel, ELTEX YARNCONTROLL, PB unwinder, Inspection frame, Roll-up winder, Creel (2 levels) (no unwinder), Spare-parts.
2 SERVO MOTORS FOR PB FEEDING ARE MISSING BUT OTHERWISE MACHINE IS HIGH QUALITY.
Machine can be modified to do 40mm Pile Height.Mote: Machines come with complete elect panel
Machine requires 2×40′ for shipment
AB64/180225/
CMC 1/8 Cut Tufting
Quantity: 1, Year: 2003, ww: 4.1 m, Type: Cut SSN – CONCEPT 2000, Speed : 900 RPM, Pile height : 4 – 12 mm.
Including: controll-panel, ELTEX YARNCONTROLL, PB unwinder, inspection frame, roll-up winder, creel (2 levels), spare-parts.
It is very nice machine, COMPLETE, HIGH SPEED, in good running position.
Machine can be modified to do 40mm Pile Height.Mote: Machines come with complete elect panel
Machine requires 2×40′ for shipment
AI37/130225/AW/
Cobble Pantera Tuft Machines
Quantity: 3
1 Machine/s Gauge 1/10, Cut Pile
2 Machine/s Gauge 1/10, Loop Pile
AI37/130225E/AAL-AI/M/AW/
1x COBBLE tuft machine (N°4):Gauge 1/10, Cut Pile, Type LXIII PANTERA, Year 2001 equipped with 8 creels (building 40), This machine was producing 200 cm width but machine width is 500 cm.
AI37/130225E/OL-AI/M/AW/
1x COBBLE tuft machine (N°6):Gauge 1/10, Loop Pile, Type PANTERA,Year 2003, equipped with 8 creels (building 40), This machine is 500cm width but was producing 200cm width and need a set loopers, needles and fingers then ready for production of 500cm width.
AI37/130225E/OI-AI/M/AW/
1x COBBLE tuft machine (N°11):Gauge 1/10, Loop Pile Type PANTERA RECALL, Year 1998, equipped with 5 creels (building 38), This machine is 500cm width and ready for production on 500 cm.
AB64/060225/AP/
CAMPEN/BRUCKNER COATING LINE For Carpet and Carpet Tiles
Quantity: 1
ww: 2100 mm
CAMPEN coating unit, Year: 2019
BRUCKNER stenter dryer, 8 gas burners , Year: 2019
MITTER foam applicator , Year: 1992
ZIMMER steamer
OLDRICH / BEMATEK powder coating 2 units
MTM OBERMAIER relax dryer 8 gas burners , Year: 1992
LEISTRITZ extruder PVC , Year: 2011
ETF secondary backing unit
cooling cylinder
CAMPEN accumulators 2 units , Year: 2019
SHON cutting press
transportation belt
VEGA AUTOMATION packing unit , Year: 1990
cardboard forming machine
film packing machine
shrink tunnel
automatic paletising machine
labeling station
AB64/070225/AO/
Cobble 5/32” Sprint Tufting
Quantity: 1, Year: 1997, Single Sliding Needlebar, Ww 5m,Cutpile, Tufting machine including pre-winder / inspection / roll-up, Note: The machine can do Artificial Grass ( it’s with 2 motors) , Machine can be modified to other Gauges. Machine is in production. Loaded in 2 x 40FT HC containers.
Pile Height is max 13mm. Machine is Cut-Pile Straight
AB46/050225/
Tuftco Enhanced Loop Graphics Tufting Machine
Quantity: 1, Year: 1996, 4 meter, 1/10th gauge, 6 roll,servo split roller rainbow on each side.
Hydra shifter needle bar shifters.Currently tufting 144 inches. CM4.
AB46/050225/
Tuftco Enhanced Loop Graphics Tufting Machine
Quantity: 1, Year: 1996, 4 meter, 1/10th gauge
6 roll, servo split roller rainbow on each side.Hydra shifter needle bar shifters.
Currently tufting 144 inches. CM4.
AB46/050225/
Tuftco Enhanced Loop Graphics Tufting Machine
Quantity: 1, Year: 1997, 4 meter, 1/10th gauge, 6 roll,
servo split roller rainbow on each side.
Hydra shifter needle bar shifters. Servo cloth feed.
Currently tufting 144 inches. CM8
AB46/050225/
Tuftco Enhanced Loop Tufting Machine
Quantity: 1, Year: 1998, 4 meter, 1/10th gauge , with 6 rolls, split roller rainbow on front side.
Hydra shifter needle bar shifter. , Servo cloth feed. Currently tufting 144 inches. CM5
AB46/050225/
Tuftco Enhanced Loop Graphics Tufting
Quantity: 1, Year: 1999, 4 meter, 5/64th gauge, Tuftco Loop , 6 roll, Servo split roller rainbow on rear. Four roll, full-width yarn feed on front. Servo needle bar shifters. Servo cloth feed. Currently tufting 144 inches. CM12
AB46/050225/
Tuftco Enhanced Loop Graphics Tufting
Quantity: 1, Year: 1998, 4 meter, 1/10th gauge, 6 roll, Servo split roller rainbow on each side. Hydra shifter needle bar shifters. Currently tufting 144 inches. CM4.
AB64/250125/AO/
Cobble ST91 Sprint Tufting 1/10 Loop
Quantity: 1, Year: 2000, Width: 5 M, Needlebar: STR-sprint, creel/beams: beams. Machine is needle bar inline.
AA10/200125E/CA-T/M/
Cobble Tufting Loom
Quantity: 1, Year: 1986, Type ST85 RB, Width 5m, Equipped with 5 creels, 1/10 cut shifting, 400t/mn.
AA10/200125E/RA-T/M/
Tuftco Tufting Loom
Quantity: 1, Year: 2002, Type 13810502-S, Width 2m, Equipped with 10 creels, 5/64 L, 2 needle bars.
AB64/150125/BY/
Babcock Complete Tufting Backing and Finishing Line
Year: 1993
ww: 5,2 m
Gas heated.
1. UNROLL TROLLY
2. DOHLE SEWING MACHINE
3. J-BOX
4. PULL UNIT
5. MAHLO ANTI BOWING UNIT
6. BRUSH UNIT
7. LICKROLLER (précoat)
8.1. SECONDARY BACKING UNIIT unroller
8.2. J-box
8.3. pull-unit
9. ENTRY FIRST OVEN
10. FIRST OVEN 6 chambers, split
11. MITTER FOAM APPLICATOR for chemicals
12. FOAM TABLE for latex
13. ENTRY MAIN OVEN
14. MAIN OVEN 16 chambers, split
15. COOLING ZONE
16. SIDE CUTTERS
17. MATTHYS ACCUMULATOR 1
18. INSPECTION ZONE
19. MATTHYS ACCUMULATOR 2
20.1. HANDSEAME PACKING UNIT plastic feeder
20.2. carton pipe feeder
20.3. automatic packing unit
20.4. roll-up winder
20.5. packing winder
20.6. transportation belt
21. HEAT RECYCLING SYSTEM
30. CAMPEN FOAM MIXER (on request)
31. MAHLO ANTI BOWING UNIT ORTHOPAC automatic (on request)
32. LATEX KITCHEN 2 x stainless steel tanks + 3 pumps (on request)
NOTES:
Line comes without items 30, 31, 32 (see list of items)
Speed is between 7 & 18 m/min, depending on quality
Line can do grass, but PERFORATOR has to be added to make holes
Disùmantling, packing & loading cost is approx Eur 80,000
Ctrs requirement for shipping is approx 24 x 40FTHC
AB64/020125/
Cobble 3/16″ ICN Tufting
Quantity: 1, WW: 5 m, Machine is not complete.
These are missing:
Inspection + roll-up is missing
Needlebar + knife-bar is missing
One PIV is missing. ICN attachment is almost complete, but software is old!
Value is only the frame
AB64/061224/
Cobble 5/32″ ICN Tufting
Quantity: 1, Year: 2000, WW: 5 m , With unroll / Creel / Inspection / Roll-up winder & controll panel.
Note: Machines are in excellent condition, they can be started under power in dry run status during inspection because there is no material to make tufting.
AB64/061224/
Cobble 3/16″ ICN Tufting
Quantity: 1, Year: 1994, Machine renewed in year: 1998, WW: 2,5 m , With unroll / Creel / Inspection / Roll-up winder & controll panel.
Note: Machines are in excellent condition, they can be started under power in dry run status during inspection because there is no material to make tufting.
AB64/261124/AO/
Cobble ST91 Sprint Tufting 1/10 Loop
Quantity: 1, Year: 1998, Width: 5 M, Needlebar: STR-sprint, creel/beams: beams.
