AC96/051224/
MONFORTS STENTER/HEATSETTINHG FRAME
Quantity: 1, Year: 2003/2004, MONFORTS type MONTEX 5000
upper roller width 2.200 mm, suitable for fabric width of up to 2.000 mm, 5 chambers gas heated,
horizontal pin chain, high cloth feeding device, edge uncurlers make ERHARD & LEIMER type KF 2020,
entrance into 2 roll squeezing mangle make KÜSTERS/FEYEN type 222.50.2200, roller width 2400 mm,
high cloth feeding and fabric guiding by stainless steel rollers into 2nd pad mangle make KÜSTERS/FEYEN
type 222.50.2200, deviation rollers to deviate the 2nd pad mangle, feeding into weft/bow straightener make
PLEVA with VISUALISATION type CINTEX, entrance into stenter frame with working panel SATELITE and
VISUALISATION, PLEVA moisture control type DSD-1 and SD-1P, optoelectronic width control make
ERHARD & LEIMER type FR1501, overfeeding, horizontal pin chain, 5 chambers gas heating, gas burner
make MAXON type VALUPAC, exit of stenter by cooling zone, plaiter and/or big batcher, SIMATIC touch panel
at exit with VISUALISATION, LENZE INVERTER.
AG54/061224/
Krantz Dryer
Quantity: 1, Year: 2003, 4 warm-up fields, Powered by diathermic oil, 1 pass of fabric, Working height 2500mm, Capacity of approximately 4000 kg of fabric, every 24 hours of work.
AG54/061224/
Monforts Stenter
Quantity: 1, Year: 2012, 7 fields powered by diathermic oil, Horizontal chain, with pins, Monforts brand scarf, 2 Mahlo brand weft straighteners, Working height 1600mm, Flap exit.
AB55/281124/AR/
Ehwa Stenter Frame
Quantity: 1, Year 2015, 8 Chambers, Working Width 2000mm, Gas Fired, Pin Chain, 2 Bowl Finishing Padder, Korean Weft Straightener, Tandematic Decuerlers, Over Feed System, Cooling Zone at Exit, Exit with Plaiter, Excellent Condition.
AE56/241124D/ACS-AI/F/
Ehwha Stenter
Quantity: 1, Year: 2018, brand Korea, width 220cm, 10 chamber, gas heated, with center padder, Horizontal chain, can test running
AA10/191124/
TEK-IND Belt Dryer
Quantity: 1, Year: 2005, mod. GHIBLI , belt width 1600 mm.
with 1 FULCENS Generator hot air , mod.GI90 year 2005.
AF74/111124/
Bruckner Stenter
Quantity: 1, Year: 2001, For Woven Fabrics, Max working width 2400mm, Horizontal chain with pin, 6 chambers, Hot oil heated, Bianco weft straightener, Bruckner squeezing padder, From trolley to trolley or batcher, Modernized panel in 2020, Working condition.
AB34/091124/AZ/
Bruckner Stenter
Quantity: 1, Year: 2000, Stenter for drying and heat setting, Type: VN20/8, For woven fabrics, w. w. 2000 mm.
Natural gas heating, Mahlo weft straightener, Control cabinet with inverters and electronics, Service platform, Double ventilation drying tunnel, 8 chambers with a total length of 35 m, with 16 natural gas burners, Eclipse Ratiomatic, left and right burners with full equipment and automation, Hot air extraction, A vertical chain system for guiding the fabric with the need to change to a needle one, Calender with cooling max. down pressure: 5 tons, Fabric winding system with guide rollers with pneumatic cylinders.
Power supply: gas installation, supply / exhaust ventilation system, Compressed air, water and sewage system, Power consumption – 65 kW, Dimensions – 4.5 m wide; 35 m long.
AE39/130924/
Unitech Stenter
Quantity: 1, Year: 2019 (Installed in 2020), Model: EVO RED8, Working Width: 2200 mm, Chambers: 6 chambers , Padders: Includes 2 BIANCO padders , Weft Straightener: BIANCO, Heating System: Gas, Chain: Vertical pin with security clip, Exit: with cooling zone, rolling A-frame and plaiter, Additional Details: Includes a steamer, glueing system, cutting selvedges, Condition: Excellent and inmediatly delivery.
AD63/121024E/AIY-O/F/AQ/
Bruckner Flat Stenter
Quantity: 1, Year: 1990, Working width: 2.200 mm
Single layer stenter machine, Number of chambers: 6
Heating system: gas, N. 12 gas burners brand BRUECKNER / ECLIPSE
Vertical chain with pins, Fabric entry: from big roll or plate
Padder with two cylinders, brand BIANCO, working width 2.000 mm, yoc 1995
Cooling device at the exit with air blowers
Fabric delivery: in plate or with small roll by inspection machine with cradle for non-stop effect
N. 1 Exhauster, Suitable for knitting and woven fabrics
It is possible to convert it to oil heating.
It is still running.
This machine is wihtout weftstraightner.
Stenter dimensions: about 35 meters of lenght , width about 4 meters + 0,8 meters for opening the doors, so total width is 5,6 meters.
AE56/300924/
MONFONGS STENTER
QUALITY: 1, YEAR: 2010, 260CM ROLLER WIDTH, 240CM WORKING WIDTH, 9 CHAMBER
OIL HEATED, 1 PADDER, Without WEFT STRAIGHNER, PIN CHAIN, LENZE INVERTOR, SIMENS PLC,SIMENS MOTOR,, STOPPED CONDITION, IMMEDIATE DELIVERY
AC63/270924/
Babcock Stenter Machine
Quantity: 1, Year: 1997, Model 5323 1800, Made In Germany, Pin Drive, Oil Heated, Roller Width 260 cm, Working Width 240 cm, 8 Chamber
Including : – Padder – Platter – Mechanical Straightener
Serial Number 161845.11.08, Mill Floor
Voltage 380V – 50 Hz, Test Run Before Loading
AD92/270924E/CS-Y/F/
Obermaier Dryer For Knittwear
Quantity: 1, 3 chambers, 3 passes, 2.400 mm, Gas, The 4 belts are news
AA10/250924/
TTM Stenter Frame
Quantity: 1, Year: 2011, mod.X2 , width 2200 mm., 7 chambers, gas heating, suitable for knitting, expander unit on entry, overfeeding group, selvedge gummers and cutting group, without Padder, without Weftstraightener
AB72/130924/
Bruckner Stenter Knits
QUANTITY: 1, YEAR 1996, WW 2200MM, ENTRY IN PLAITED FROM A TROLLY OR A FRAME PRE-TENSION CONTROL. BIANCO COMPACT M GUIDER WITH 2 DRIVEN SCROLL ROLLERS. BRUCKNER 2 BOWL FINISHING PADDER WITH 2 MIXING TANKS DIP TROUGH. 2 DRIVEN SCROLL ROLLERS. MAHLO WEFT STRAIGHTENER TYPE RFMC 9 FINE TRIM COMPENSATOR. BRUCKNER STENTER TYPE VN. SIEMENS PLC CONTOL. AC LENZE INVERTER DRIVES. ENTRY RAILS WITH THE LATEST E+L GUIDERS TYPE LA 8301, 3 FINGURE UNCURLERS EDGE SPREADERS OVERFEED DRIVES LH & RH. VERTICAL PIN CHAIN 5 METER ENTRY RAILS. 6 HEATING CHAMBERS WITH 12 VARIABLE SPEED FAN MOTORS. 2 X EXAUST FANS , ONE EXHAUST FAN AND ONE FORCED AIR FAN. GAS HEATED NATURAL GAS 12 X ZUNAUNG BURNERS. TOTAL HEATING CAPACITY 2000 KW MAX TEMP 210 C. EXIT RAILS, EXIT END HAS AN ADDITIONAL EXHAUST CANOPY WITH FAN BUT NO COOLING ZONE. MAHLO PROCESS CONTROL TYPE VMC-12, MAHLO FMC-10. PLEVA PROCESS CONTROL TYPE TDS 95, PLEVA FS 91 CONTROL. TAKE OFF BY PLAITER.
*AD26/260823E/AOR-AL/F/AQ/
Reggiani Stenter
Quantity: 1, Year: 2001, model THERMA, Working width 340 cm.
Entry Jbox for feeding fabric -Beta padder with 2 cylinder rubber covered , and tank impregnating product -Entry & exit MAHLO WEFTSTR.
6 electronic heads , and Accumulator fabric device – 1-Zanzottera mixer products – 2-Zanzottera storage tanks -12 -chambers heating 12 metan gas burners -horizontal chain with clips ( it is possible to add some parts to also have chain with pins)
Loading in 7-8 containers 40’
AD63/070924/
Monforts Montex Stenter
Quantity: 1, Year: 1993, Completely overhauled and repainted in year: 2016, Model: MONTEX 12G/K, Useful working width: 2.200 mm, Entry arm’s length: about 5,5 meters, Number of chambers: 4, Heating system: gas, Burners brand: MAXON, Horizontal chain, Pin chain, Cooling device at the exit with air blowers, Fabric delivery: big roll or plate, N. 2 exhauster for the expulsion of exhausted fumes, Exit fabric in plate, Electrical cabinet, The stenter will be supplied complete with the gas system on the machine and the electrical system on the machine, Suitable for woven and knitting fabrics.
AF74/050924/
Monforts Montex 8F Twin Air Stenters
Quantity: 2, Year: 1996-1998, Working width 1800mm, 8 chambers, Gas heating (Goldflame burners), Mahlo weft straightener, Kusters squeezing padder, Horizontal chain, Pin & clips, Heat recovery system, Fabric entry from plaiter and batcher, Fabric delivery to plaiter and batcher, J-Boxes are available at the entry and delivery.
AD63/070924/
Unitech Stenter
Quantity: 1, Year: 2003, refurbished in year 2020, 20 meters of oven gas heated, Working width 2400 mm, Model: RED EVO 3, Spreading rollers at the entry of the machine, Selvedge gluing device, Steamer device, Entry arms of 6 meters, Heating system: natural gas, Burners brand: WEISHAUPT, Meters of oven: 20 meters (10 sections of 2 meters each), Vertical chain, Chain with pins and anti-depinning system, Cooling unit, Selvedge trimming devices, Delivery in plate and big roll, PLEVA device TDS 95, Machine suitable for woven and knitting fabrics, Please note, this machine can be sold apart, but is part of a whole printing plant in sale.
AB55/030924/
Unitech Stenter
Quantity: 1, Year: 2019-20, Working Width 2000mm, 6 Chambers – Dual Flow, Gas Fired, Combined Pin & Clip Chain, Bianco 2 Bowl Padder, Bianco Weft Straightener, Exit with Plaiter & J Scray onto an Integrated Inspection line and Batcher, Machine ran very less hours . Brand New Condition.
AA02/030924/
Sulzer Rapier Weaving Looms, Dyeing and Finishing
AA02/030924D/YCT-CP/M/
55x SULZER RAPIER WEAVING LOOMS
26x SULZER RAPIER WEAVING LOOMS
Model G6200, Year 1999, 220cm Working width, Cam, 8 – 12 levers installed, 6 – 12 harnesses installed, Staubli Electronic Dobby – Model 2672, 530ppm Max, (4) Color filling selections, (2) Filling feeder per loom, On loom take up, Leno selvage.
29x SULZER RAPIER WEAVING LOOMS
Model G6200, Year 1998, 190cm Working width, Cam, 8 – 12 levers installed, 6 – 12 harnesses installed, Staubli Electronic Dobby – Model 2672, 530ppm Max, (4) Color filling selections, (2) Filling feeder per loom, On loom take up, Leno selvage.
AA02/030924D/CI-C/M/
3x SCHLAFHORST AUTOCONER 338 WINDING MACHINES
338 RM, 60 Spindles, Air splicers, Straight SS drums 2T, Loephe TK840 clearing, Empty bobbin at each section, Full package conveyor, Year (2) 1998 (1) 1999.
AA02/030924D/CCY-AY/M/
1x MONFORT HIGH EFFICIENCY TENTER FRAME
Model Montex 9-F TwinAir, 220cm rolls with / 200cm fabric width, Pin chain, Horizontal return, 9 Zone – Gas burners (set up for gas or change to propane), RA Moore control system, Kuster 4 dip saturator with nip roll and vac slot, Ten tone saturator exit nip, Mahlo weft straightener, Water cooled stripper rollers and air plenum, Two roll surface winder and plaiter options at exit, Year 1999.
AA02/030924D/RR-R/M/
2x ZONCO BATCH ROPE FULLING/MILLING MACHINES
Model Flexicom 800, 4 Channels, Year 1999.
AA02/030924D/RR-R/M/
2x ZONCO BATCH ROPE SCOURING MACHINES
Model Flexirapid 600, 15 Channels, Year: 1998.
AA02/030924D/CC-C/M/
1x BIELLA VULCO WOOLEN / CRAB
220cm, Year 1998.
AA02/030924D/RAT-CA/M/
1x CIMI OPEN WIDTH WASHER
Model Lavanova Superfix Rotordry
220cm rolls width
200cm fabric width
AC with inverters motors, JBox, Corino entry
(2) Prescour tanks with squeeze roll
(2) Scour tanks with squeeze roll
(1) Soap tank with squeeze roll
(1) Scour tank with squeeze roll
(1) Large rinse tank with squeeze roll
(1) Small thermic shock rinse tank with high pressure (15 ton)
(9) Wash boxes
(2) Steam chambers
(18) Can elevated dry can section (in line, run with or without)
Crabbing / Setting tank section with added steam coils, Continuous plater doff system, Pin chain controls fabric thru the 4 pass dryer, Year 1998.
AA02/030924D/YR-Y/M/
1x LAFER SUEDING MACHINE
AA02/030924D/AIO-O/M/
2x IRA GRIFFIN SLASHER SIZING MACHINES
Year 1998, 30 Dry cans, Motorized creel movement, Overhead hoist, Headway for 220cm beam, With Size kitchen, 4 Size boxes.
AA02/030924D/CI-C/M/
2x GASTON COUNTY FUTURA SAMPLE DYE LABS
Model: Ultra Soft, 3 Rolls / 220cm working width, Year 2015, Voltage 400v, Frequency 50hz.
AA02/030924D/TY-Y/M/
4x MORTON DYE BECKS
AD92/290824E/RS-Y/F/
Santex Dryer
Quantity: 1, Year: 2000, Model Santashrink 2K/240, w.w. 2.40 m, Steam heating, 2 chambers, One pass.
AE56/260824/
Monforts Stenter
Quantity: 1, Year: 2006, Germany origin, width 200cm, 8 chamber, , oil heated, 1 padder, with Mahlo Weft Straightener
AC63/300724/
Monforts Stenter
Quantity: 1, Year: 2007, Monfort Montex, Made in Germany, Horizontal Drive, 2 Drying Cylinder, With Platter, Mahlo Weft Straightener, 8 Chamber, Pin Type, AC Drive, Working Width Max. 190 cm, Extra Coating Device (Rota Spray), 6 Drying Cylinder Extra, Voltage 380V – 50 Hz.
AC93/290724/
Unitech Stenter
QUANTITY: 1, YEAR: 2006, STENTER FOR KNITS, 8 CHAMBRES, GAS HEATED, LONG ENTRANCE, HORIZONTAL PIN CHAIN, 2.200 MM WORKING WIDTH, EXIT BY FOLDER AND A-FRAME BATCHER.
AE56/060724/
Monfong Stenter
Quantity: 1, Year: 2012, roller width 240cm, working width 220cm, 9 chamber, oil heated
1 padder, without weft straighner
pin chain,Lenze invertor, Simens PlC,SimensMotor, Stopped Condtion, Immediate Delivery.
AC44/020724/
Unitech Stenter
QUANTITY: 1, YEAR: 2002, MODEL : REDevo 3/8K/230, WORKING WIDTH : 230cm
ELECTRICAL SUPPLY : 380 V 50 HZ, NUMBER OF CHAMBER : 8, HEATING SYSTEM : GAS, WEFT STRAIGTENER: MAHLO, FOULARD: BETA 2 BOWLS, CHAIN TYPE: VERTICAL CHAIN
AE56/290624D/ATC-AC/F/
Monfongs Stenter
Quantity: 1, Year: 2015, Roller width 340cm, Working size 320cm, 10 chamber, Gas heated, With central device, With padder, Horizontal pin chain. It has weft straightener China brand.
AB55/130524/
Babcock Stenter
Quantity: 1, Year 1991, Width: 220 CM, Working width 200 cm, 6 chambers, Gas heating, Horizontal chain with pin, foulard, Updated to S7 controller.
AG54/190624E/YC-Y/M/
Bruckner Stenter
Quantity: 1, Year: 1998,Working height 2200mm,4 fields,gas powered,horizontal chain,Flap exit. Included also weft straightener brand Mahlo.
Stenter still working now.
AE56/190624D/COC-AL/F/
Monfongs Stenter
Quantity: 1, Year: 2020, Wwidth 360cm, 10 chamber, Gas heated, Without weft straighner, Brand new machine, Can make for Blanket. Machine has spare parts. Machine installed but not used. Factory can dry test run during inspection. Machine has no drawing. Ctrs requirement for shipment: 8×40′ High Cube.
AG54/060624/
Bruckner Stenter
Quantity: 1, Year 1997,Working height 2200mm, 4 fields, gas powered, horizontal chain, Flap exit.
There is no weft straightener. There is no Padder.
AC23/070524E/TA-L/F/BM/
Krantz Stenter Knits
QUANTITY: 1, YEAR: 1998, WW 2400 MM, GAS
PRE-TENSION ENTRY, BIANCO COMPACT C GUIDER WITH DRIVEN SCROLLS BIANCO 2 BOWL PADDER
SETEX – WEFT STRAIGHTENER 6 SCANNERSKRANTZ STENTER TYPE K-20
6 METRE ENTRY RAILS WITH TANDEMATIC EDGE SPREADERS E+L GUIDERS, OVERFEED PLUS 50%,
GUMMING & TRIMMING SYSTEM
VERTICAL PIN CHAIN, MODEL: K20, 6 CHAMBERS
BURNER TYPE: GAS – MAXON, MODEL VALUEPAK BA-350,
EDGE TRIMMING WITH VACUUM SUCTION
COOLING ZONE, TAKE OFF BY PLAITER
NEW SOFTWARE, UPGRADED 2007 & 2014, SIEMENS STEP 7 TOUCHSCREEN CONTROLS, EXCELLENT CONDITION.
Special fitted for knitted
AE56/030624/
Monforts Stenter
QUANTITY: 1, YEAR: 2010, 260CM ROLLER WIDTH, 240CM WORKING WIDTH,9 CHAMBER ,OIL HEATED,1 PADDER, Without WEFT STRAIGHNER,PIN CHAIN,LENZE INVERTOR ,SIMENS PLC,SIMENS MOTOR, STOPPED CONDITION.
AA10/300524/
Unitech Stenter
Quantity: 1, Year: 2019, Type RED EVO, Width: 2m20, 6 compartments, gas, 2 BIANCO Padders, BIANCO weft straightener, equipped for knitted fabrics.
AA10/300524/
Monforts Stenter
Quantity: 1, Year: 1999, For weaving fabric and knits, Type MONTEX -7F-Twin air, Working width 240 cm, 7 chambers, Thermo-oil heating, 1 Cooling chamber, 2 extractors.
AE56/270524/
Monfongs Stenter
Quantity: 1, Year: 2010, width 260cm, 8 chamber, oil heated, with MAXON burner, with center padder, Horizontal chain, running condition
AD26/150524E/ATY-AC/F/
Unitech Stenter
Quantity: 1, Year: 2013, 8 chambers, Working width 2200 mm. Vertical clips chain. Beta padder 2 cylinders. Bianco weftstraightener with banana enlarger. Gas heated.
AE56/110524/
Monfongs Stenter
Quantity: 1, Year: 2017, width 240cm, 10 chamber, steam heated, with center padder, Horizontal chain
AD26/100524E/AOO-AC/M/AQ/
Monforts Single Layer Stenter
Quantity: 1, Year: 2007, 8 gas chambers, Model: MONTEX 8F-V, Useful working width: 2.200 mm., Weft straightener brand BIANCO, with 6 optical heads, year 2002, Nr. 8 chambers gas heated, Nr. 8 Maxon burners, Horizontal pin chain, Length of the input arms: about 5000 mm., Steamer under the entry arms, Cutting device and selvage suction device, Cooling system at the exit from the oven, Delivery fabric in plate and in tangential big roll, Double exhauster for the expulsion of exhausted fumes, Electrical cabinet, Machine suitable for knitted and woven fabrics. The machine is still in running condition, but it has been stopped lately due to little work.
AB55/240424/
Monforts Stenter
Quantity: 1, Year: 2011, Type Montex 6500-GF Twin Air, Width 200 cm, 6 chambers, gas heating, pin and clip with horizontal chain
Mahlo weft straightener type Orthomat, Küsters Foulard type 222.52-1800, year 1992, with Maxon MF300 burners, exit with big batcher and plaiter.
AE02/190424/
Effedue Stenter
Quantity: 1, Year: 1999, Type Piana Flat 2000-L, ww. 1800 mm, 4 chambers, gas heated, vertical chain, for knitted and woven fabrics.
AD63/180424E/RYP-CI/F/AE/
Bruckner Stenter Frame
Quantity: 1, Year: 2016, Split Flow VN SFP 32/4, ww. 600 – 3200 mm, 4 chambers, vertical Star Dur chain, entry 3 meters, gas heated, Brückner Multi Control, Opti humidity control, Mahlo Orthopac weft straightener, Feyen foulard, less used – less working hours – top condition, Entry of fabric with J-box, MERROW cutting and sewing machine, Fabric stopping device for the sewing, Introduction frame to the padder with some passage cylinders, Fabric guiding device ERHARDT+LEIMER, model KF 2020, Impregnation padder FEYEN (KUESTERS), n.2 cylinders, one is floating, MAHLO weft straightener, with optical heads, model ORTHOPAC RVMC-126, BRUECKNER single layer stenter machine, Oven entry arms’ length: 3.000 mm. Number of chambers: 4, Heating system: gas, Maximum working temperature: 210 °C, Vertical chain. Pin chain, Maximum working speed: 40 meter/minute. Oven exit arms’ length: 3.500 mm, Cooling device. Delivery of fabric with plaiter and big roll. OPTI-HUMIDITY, (moisture/humidity check for the exhausted/waste air) with measuring probe. MULTICONTROL, work process control and visualization system. Exhaust-suction device for the expulsion of exhaust/waste fumes positioned above the oven. Machine needs n.5 containers 40’. Machine is suitable to work Fabric, blankets and moquetes.
AC96/220324/
Bruckner Stenter
Quantity: 1, 5 bays, oil heated, Vertical pin chain, KUSTERS mangle, BIANCO weft straightener, cooling zone, on-winder, plaiter, incl. oil boiler, ww 1800 mm.
AC96/220324/
Alea Dryer
1x ALEA dryer, 2 sections, steam heated, on-winder, ww: 2500 mm.
1x Cylinder dryer, 19 cylinders, steam heated, on-winder.
3x Winches
AD63/060424/
REGGIANI CONVEYOR DRYER WOVEN FABRICS
QUANTITY: 1, YEAR: 2011, WW 2400 MM
FOR DRYING DIGITAL PRINTED FABRICS,
GAS HEATING 2 WEISHAUPT NATURAL GAS BURNERS WITH 2 X 7.5 KW CIRCULATION FANS. 2 EXAUST EXTRACTOR FANS.
TAKE OFF BY PLAITER WITH ANTI STATIC DEVICE OR CENTER WIND ONTO A FRAMES.
VERY LOW RUNNING HOURS EXCELLENT CONDITION
AA10/030424/
KRANTZ Dryer For Knitted Fabrics
Quantity: 1, Year:1998 , Model 2012, Working width 2m60, 2 chambers
AD63/020424E/SS-AI/F/AQ/
Bruckner Stenter
Quantity: 1, Year: 1998, Double deck stenter machine, 4 chambers superimposed gas heated, Working width 1800 mm, Number 4 superimposed chambers, two above and two below, Useful working width: 1.800 mm. Number 8 ECLIPSE brand burners, Fabric entry from layer or big roll, Fabric delivery in plate, Exhauster for the expulsion of exhausted fumes, Electrical cabinet positioned on a raised structure.
AB34/240324/
Unitech Dryer and Stabilizer
Quantity: 1, Year: 2019 y.o.c. 2019, used since 2021, Model RED EVO 8-DF-6K-220-G type Ramosa, Working width 2600 mm.
Machine designed for drying and stabilizing fabrics and knitted fabrics in width, 6 drying fields, gas heating.
Consisting of: Bianco input, Bianco foulard, MDC Bianco weft straightener, RED EVO 8 Dual Flow frame dryer, 6 chambers á 3 m, receiving device with folding machine and winder, control cabinet.