AA10/270125/
Raising Line
Composed of:
2x CROSTA Raising machines mod.MC10/30C yoc 1997, table width 1900 mm., 30 cylinders each.
1x CROSTA Raising machine mod.MC20/24 GF yoc 1994, working width 2200 mm., 2 drums 24+24 cylinders, suitable for knitting fabric open and tubular, with wideners.
1x LAMPERTI Raising machine mod. GHM/L93 yoc 1995, w.width 2850 mm., 2 drums 24+24 cylinders, suitable for tubular knitting fabric.
1x DANTI E VANINI Vegetal Teasel Raising machine (chardons roulants) , width 2600 mm., fabric turning device.
1x CROSTA Shearing Line mod.SSC/A yoc 1998, table width 1800 mm., composed of: 4 cutting sets (1 reverse and 3 rights), Folding exit, Prismatic bench.
1x VOLLENWEIDER Shearing machine mod.TSE-2 yoc 1993, table width 1800 mm
1x LAMPERTI Sueding machine mod.SMB yoc 2001, brushes width 2400 mm., 3 vertical brushes, input from trolley, output folding system, without suction.
AA10/270125/
Crosta Raising
Quantity: 1, Year: 1994, mod.MC20/24 GF, Working width 2200 mm. 2 drums 24+24 cylinders, suitable for knitting fabric open and tubular, with wideners.
AA10/270125/
DANTI E VANINI Vegetal Teasel Raising
Quantity: 1, (chardons roulants) , width 2600 mm., fabric turning device.
AE02/280125/
Lafer Raising line GRI 132F/GRI 132E
Quantity: 1, Year: 2000, ww. 2400 mm, comprising of 4 raising machines, 32 raising rollers
AA10/270125/
Lamperti Raising
Quantity: 1, Year: 1995, mod. GHM/L93, w.width 2850 mm, 2 drums 24+24 cylinders, suitable for tubular knitting fabric.
AA10/270125/
Lamperti Sueding
Quantity: 1, Year: 2001, Model SMB, Brushes width 2400 mm. 3 vertical brushes, input from trolley, output folding system, without suction.
AA10/270125/
Crosta Raising Line
Composed of:
2x CROSTA Raising machines mod.MC10/30C , Year: 1997, table width 1900 mm., 30 cylinders each.
Machines still connected.
AE56/130125/
Lafer Raising Machine
Quantity: 1, Year: 2015, width 200cm, Italy origin
double drum 28+28 rollers, can test running
AA02/110125D/AOR-P/M/
Texima Tenter Frame
Quantity: 1, Year: 2004, 108” (2700mm) working width, Pin / Knits, 6 Zone / 63ft. Oven, Vertical Return, Natural gas, Horizontal single pass, Mahlo VMT (control dwell time & fixing time), E + L Guiders / Spreading device, For smoothing out moving webs and unfurling edges.
Spreading device consists of; three-phase AC gearmotors, Spreading rollers with T or rounded profile, Pedestal bearing, pivoting gears, hand wheel Textima Padders.
Padder #1 Extractor Pad. Top roll driven, roll Ø 373mm, Bottom roll idle, roll Ø 383mm.
Padder #2 Processor Pad. Top roll driven, roll Ø 392mm, Bottom roll idle, roll Ø 392mm.
Mahlo weft straightener, Year: 2004, Padder, Inspection, (3) Stainless Chemical Add Tanks, (2) 100 Gallon with Lightening Mixers, (1) 50 Gallon with Lightening Mixer.
AA02/080125/
Thermal Oil Bruckner Tenter Frame
1x BRUECKNER Tenter Frame
Year: 2014, Model Power Frame, Type VN.SFP.18/4 for flat woven fabrics, Thermal Oil Heated with circulation fans, With Brueckner Power Pad, Roller width 2000mm, Maximum working width 1800mm, Minimum working width 600mm, 4 Zones, Vertical Chain return – Star – Dur, Pin chain with cover and unpinning protection
Entry field 4.0 meter long, 4 heating Chambers each 3.0 meter long, Exit field 3.5 meter long, Max Temp 210 deg C, Min Temp 110 deg C, Speed 40 meters per min.
1x INPLAN INGENIEURTECHNIK Thermal Oil Boiler
Year: 2014, Model H.800, 930 KW, Max Temp 300 deg C, Flow rate minimum 7.2 M3/hour, Max pressure 10 Bar, Max Test Pressure 21.4 Bar, 220/480 Volts, 50/60 Hertz.
AA10/070125/
Calemard Belt Cutting Machine
Quantity: 1, Year: 1994, Type ATHENA, Width 180 cm, for hot or cold cutting, 11 knives for hot cutting and 18 knives for cold cutting.
AC94/090924/BY/
Sperotto Rimar Scouring Line
Quantity: 1, Year: 2003, Type Nova 280/800 Special, 280cm working width, Unwinder, Scouring Unit, Drying Unit, Winder, Primary Distiller, Secondary Distiller, Active Carbon Filter Unit, Separate Deposit Tank (S/S), Status: In Operation.
AA10/180621E/TR-R/M/
Biancalani AIRO DUE L
Quantity: 1, Year: 2006, discontinuous Washing/Drying/softening, Number of ropes: 2, Number of chambers: 2, With cylinders for dragging fabrics, Nominal capacity: 600-1200 meters, Gas heated, Maximum temperature of the air: 170 °C, Discontinuous machine for washing, drying and softening fabrics, Machine in very excellent condition, Machine still in running, Machine suitable for many processes, including: drying, softening, enzymatic treatments, special treatments with polymerization of chemical products, etc.
AE56/311224/
Lafer Brushing / Sueding Machines
Year: 2006,2008,2009, Italy origin, 220cm working width, 6 carbon rollers, Parts complete.
AC96/161224E/PSI-YI/M/
Menzel Continuous Bleaching Line
Quantity: 1, Year: 2015/2016, Upper roller width 3400 mm. Suitable for fabric width up to 3200 mm or 2 x 1.600 mm.
Comprising out of : washing, application, relaxation steamer, washing, drying compartment, high cloth feeding, entrance into J-box for interruption free production with dancing/compensator roller or deviation of the J-box, high cloth feeding with edge uncurlers make ERHARD & LEIMER type KF2020, segment roller as rotary expanding roller for even feeding make ERHARD & LEIMER type SW, entrance into 1st washing compartment with approx.. 25 mtr fabric content with 7 upper/8 lower rollers, squeezing unit, high cloth feeding into relaxation washing compartment with rotary expanding segment roller make EHRHARD & LEIMER type ELSMART. squeezing roller, entrance into 2nd wash compartment with 7 upper/8 lower rollers with approx.. 25 mtr. fabric content, lye application compartment, entrance into steamer with approx. 60 mtr. fabric content tight strand on roller, 1.400 mtr. on relaxation belt compartment, squeezing roller, exit od steamer into 3 washing compartments with each of approx.. 25 mtr. content with each washer installed squeezing roller, feeding into cylinder dryer make WUMAG with it’s housing type MDD 16/2 comprising out of 2 columns of each 8 cylinder with each diameter 800 mm, steam heated, exit of cylinder dryer into J-box for interruption free production and dancing/ compensator roller, with centre cutting unit for 2 x 1600 mm fabric width, heat recovery, dosing station SIEMENS VISUALISATION, INVERTER.
AB08/161224E/LA-T/F/BJ/
Benninger Zell Sizing
Quantity: 1, Year: 2002, Suitable for terry fabric, Model: Ben Sizetec, Working width: 3’800mm, Beam dia: 1’000mm, Creel with 8 workstations for beams 1’000mm, Single size box with 5 Rolls One Dip and Two Nips. (suitable for 1’000mm warp beams), 8 X Drying cylinders diameter 1’000 mm, (4 X Teflon-coated), Residual moisture monitor- Mahlo Ecopac, Size kitchen, No of sizing beams: 18.Width of sizing box is 1’800mm.
AE56/091224/
Osthoff Singeing
Quantity: 1, Year: 2012, Roller size 200cm, 3 burn, Working size 180cm, Without washing tank.
AG54/061224/
Mario Crosta Raising
Quantity: 1, Year: 1998, Working height 2000mm, 36 cylinders, year 1998, complete with flap. Hunting Electronics.
AG54/061224/
Santex Santasoft Tumbler
Quantity: 1, Year: 2008, High inlet with E+L KF2020 centering unit. TMT Foulard completely in Stainless Steel. SANTEX Dryer Model SANTASOFT, Year 2008. 2 Chambers, Steam heated.
AG54/061224/
Lafer Shearing
Quantity: 1, Year: 2004, Model: CM 100, Working height 2200 mm, Controlled by inverters and screen, Dust extraction and motor.
AG54/061224/
Lafer Raising and Shearing Line
2x Lafer raising machines, Year 1997, Double barrel, height 1800mm.
1x Lafer raising machine, Year 1997, Single barrel, Height 1800mm + Lafer trimmer. Twig with chain to widen the fabric.
1x Lafer raising machines, Year 1997.
,…
AG54/061224/
Lafer Raising
Quantity: 1, Year: 1998, Model GRI90, Working height 2200mm, Double barrel 24 + 24 cylinders, Panel with inverters and with PLC, Flap outlet.
AD92/061224/
Anglada Tumbler Duplex
Quantity: 1, Year: 1999 refurbished at 2023, w.w. 3.20 m, Gas, steam production 400 to 500 kg/h
AG54/061224/
Biancalani Air 24
Quantity: 1, Year: 2022, Working height 2600mm,For Sponge,Airo 24 C model,
AA10/191124/
BIELLA SHRUNK PROCESS Continuous Decatizing machine
Quantity: 1, Year: 2001, mod. THERMO DUPLEX 90, w.width 1800 mm.
AD63/200824/
BIANCALANI AIRO QUATTRO
Quantity: 1, Year: 2001, Model: AIRO QUATTRO
Number of ropes: 4, Number of chambers: 4
With cylinders for dragging fabrics
Nominal capacity: 2400 meters, Steam heated, Discontinuous machine for fabrics
Machine suitable for many processes, including: washing, drying, softening, enzymatic treatments, special treatments, etc.
AB55/161124/AN/
Osthoff Singeing
Quantity: 1, Year: 1995, Fully Rebuilt by Osthoff 2020, Roller Width 2000mm, Desizing. Pre and Post Brushing, Fully Invertor controlled, Brand New Burners, Excellent Brand New Condition.
AC93/121124/
BIANCO IMPREGNATION PADDER
Quantity: 1, Year: 2019 , Roller Width 2400 mm, Number of Bowls : 2
DOGAL GUIDER AND CENTRALIZER , MAX. SPEED 80 m/min
AB32/101124E/CTO-CI/M/BY/
Sizing Machine & Direct Warping Machine
BENNINGER Sizing Machine
Model: BENSIZE TEC, Year: 2003
Machine Layout (copy)= AVAILABLE
Beaming machine max width =2800
Beaming machine max beam deameter = 1000
Numer of comb sectors and teeth for sector =26/32
Tension zones =8 zones (2 creel/sizebox in-out for each size box/splitting
area/winding) plus press roller
Tipe of tension control =LOADCELL
Humidity device (model)=MAHLO
Waxing device = YES
Number of Drying cilinder teflon / not teflon = 8/4 TOT.12
Number of dryer temperature zone = 4
Dryer transmition = CHAIN MOTOR
Dryer Hood = YES
Number of hood fans =2
Number of Size boxes =2
Size box max work width =2400
Wet splitting =NO
Pre-wetting =NO
Number of beam Creel positions = 20
Beam creel max width =2200
Beam creel max diameter =1000
PLC model =SIMENS S7-400
Inverters models =SIMEMS SMOVERT
Cooking tank (capacity) = 1000 LIT.
Reserve tank (number and capacity) =2-1200 LIT.
Numbers of size boxes filling pumps = no pumps/reserves installed on
mezzanin
BENNINGER Direct Warping Machine
Model: BENDIRECT 98, Year: 2002
Machine Layout (copy)= AVAILABLE
Beaming machine max width =2200
Beaming machine max beam diameter = 1000
Type of creel = parallel with trolleys
Numbers of creel positions = 784
Type of creel tensioners = optostop
Creel pitch = h 300 mm – v 300 mm – rows 7
Cutting device = yes
AB28/051124/
Sucker Muller High Performance Sizing
Quantity: 1, Year: 1985 , composed of:
beam creel type ZA for 16 beams
device for feeding from sectional beam,
1st sizing unit type SD M1, roller width 2000 mm, double dip, double nip
2nd sizing unit type SD M2, roller width 2000 mm, double dip, double nip
cylinder dryer type ZT-ZG, steam heated, total 8 cylinders
beaming unit WN10, max. beam pipe width 270 cm, w. width 240 cm
machine supplied with size kitchen
AE02/200324/
Karl Mayer Beaming Machine ZM-SP-1800 / 1250
Quantity: 1, Year: 2000, ww. 1800 mm, creel 840 positions
72 x beams dia. 1000 mm
20 x beams dia. 800 mm
working width 1800mm, warp creel 840 bobbin positions, Max. Speed: 1200 RPM, Total creel trolleys: 3 sets consisting of 14 trolleys (1 set in machine and 2 sets for preparation), Machine can take D= 800 to 1250 mm warp beams, cutting device, Including : 20 pieces beams of 1800 mm D= 800 mm aluminum flanges, for max. bobbin diameter 280mm, gauge 33×32.
AA10/041124E/AIS-S/F/AQ/
Warping and Sizing Line For Filament Yarns
Composed of:
-TSUDAKOMA Sizing machine mod.KSH-500 Year 1989, width 2000 mm., max flange dia.914 mm.
-ARCT / MECATEX Beaming machine Year 1992, 16 direct beams of 2000 mm., max height of beam 3200 mm., max flange dia.1000 mm.
AA10/041124/
Benninger Zell Sizing
Quantity: 1, Year: 1996, mod.BEN- FULLSIZE for filament yarn, Single size box, pneumatic leasing PK14, creel 14 positions, sizing kitchen BEN-MIX, headed cylinder width 2550 mm, sizing box cylinder width 1950 mm, 9 Drying cylinders width 2000 mm.
AE02/141024/
Monforts High Pile Machine
Quantity: 1, Year: 2021, Type: MLH 2 retro, ww. 2000 mm, Elovis length measuring.
AF21/120324/
Unitech Raising
Quantity: 1, Year: 2000, Machine type/model PEGASUS X5, no. Of rollers 28, Working width 175 cm, Machine in very good condition, Machine is complete, Customer produced Cotton blankets.
AE56/051024/BA/
Karl Mayer Sizing
Quantity: 1, Year: 2013, Swizzerland origin, 260cm head stock width, 209cm Sizing box width, 2 Sizing tank,24 beam creel, not include beam, max. 1000 mm beam dia,3 chemical tank,12 cylinder dryer.Stopped.
AE56/270924/
AIRO 24 Soften Machine
Quantity: 1, Year: 2016, Width 300 cm, gas heated, running condition
AE56/270924/
Santex Compactor
Qauntity: 1, Year: 2017, width 240cm, steam heated, make for Knitting fabric, running condition
AA10/250924/
BIELLA SHRUNK PROCESS Continuous Steaming machine
Quantity: 1, Year: 1998, mod.ECOVAP 95 , working width 1800 mm