Showing 601–642 of 642 results

Show sidebar

AF14/070324/

Lafer Raising Machine GRI 90

Quantity: 1, Year: 2000, Double drum mm 2400, 24+24 cylinders.

AF14/070324/

Lafer Raising Machine

Quantity: 1, Year: 1999, Single drum, w.w. 2200 mm, 30 cylinders, Pile/counter.

AF14/070324/

Sperotto Rimar Decatizing

Quantity: 1, Year: 1995, mod. Multidecat, w.w. mm 1900.

AH05/040324E/PC-O/F/AQ/

Kusters Calender

Quantity: 1, Year: 1995
Cylinders table: 2000 mm, Calender cylinders: no.2 (no.1 upper cylinder is cromed, no.1 lower cylinder is covered)
Upper cylinder: diam. abt. 400 mm, cromed. Cylinder in fix position, drived by a motorgearbox. Heating system by oil, through your boiler, Lower cylinder: diam. abt. 400 mm, covered in Racolan. The thickness of the Racolan is abt. 40 mm. The cylinder is idle, not motorized and no heated. The movement up-down is drived by an hydraulic unit. Fabric entry: big roll form, on trolley, Fabric exit: A-Frame batcher, drived by an hydraulic unit, Machine dimensions: abt. m 4900 L x 4000 W x 3200 H, included entry ed exit fabric groups, Feeding voltage: 380 V./50 Hz.
NOTE:
Price does not include packing
Year of make: 1995 (to be confirmed)

AB05/280224/

Osthoff Singeing/Desizing

Year: 2008/upgraded/modernized yr. 2018. 3.600 mm.

AB05/260224/

KUSTERS CALANDER

Quantity: 1, Year: 1984, 3.400 mm, 3 CYLINDER, SWIMMING S-ROLL, Thermooil heated.

AB05/280224E/OP.L-Y/F/CO/

Muzzi Sanforizing

Quantity: 1, Year: 1990/ in the year 2019 fully upgraded and modernized with INVERTER, 2.000 mm width, MAKE MUZZI/ITALY.
Suitable for a fabric width of upto 2000 mm, actual installed rubber blanket for fabric width of upto 1.800 mm, cloth feeding device, entrance into steaming cylinder, entrance into rubber blanket, exchanged in the year 2020, rubber blanket width 2051 mm, thickness of rubber blanket 57/57 mm, new felt blanket in the year 2020, felt calander felt width 2.410 mm, diameter 2000 mm, comprising out of unwinding of fabric by unbatching roller, steaming cylinder with steam suction hood, entrance into rubber calander, feeding into felt calander, exit of fabric onto batch winder.
BLANKET DETAILS: Rubber blanket thickness: 55/56 mm mm, Rubber blanket width: 2.050 mm, Felt blanket width: 2.005 mm
STATUS: on mill floor in production.
CONDITION: very much excellent.

AB05/280224E/RSL-CI/F/CZ/

Monforts Sanforizing

QUANTITY: 1, YEAR: 2017/2018, “MONFORTEX” , 3.400 mm.
Upper roller width 3.400 mm, type MONFORTEX 8000, comprising out of high cloth feeding with rotary expanding roller make ERHARDT & LEIMER type ELSPREADER with optoelectric control, feeding into ELSMART expanding device make ERHARDT & LEIMER with optical control, MONFORTS QUALITEX VISUALISATION TOUCH PANEL, feeding into STEAMING cylinder, guide rollers via WEKO rotary humidification device, stainless steel guide into rubber calander with a blanket width of 3.350 mm, thickness of rubber blanket as good as new, entire machine condition like new, exit and feeding onto felt calander with heating cylinder diameter 200 mm and drying cylinder 800 mm, exit onto E+A KOMBI exit frame with steel guide rollers, optoelectronic shrinkage control made by MONFORTS, cooling cylinder and delivery onto big batch winder or alternatively onto plaiter.
STATUS: on mill floor in production.

AB05/260224/

KUSTERS CALANDER

Quantity: 1, Year: 1995, 2.400 mm, 2 CYLINDER, SWIMMING S-ROLL

AB05/260224/

RAMISCH KLEINEWEFERS NIPCO “Y“ STAR CALANDER

Quantity: 1, Year: 1991, 2 CHROM e-hotwater heat, 1 NIPCO, 2 COTTON, 2.600 mm roller with, SIEMENS S5, Excellent condition.

AB05/260224/

STORK ROTARY PRINTING

QUANTITY: 1, YEAR: original 1991, 2014 completely revised, TYPE RDIV, 2 chamber steam heat.

AB05/260224/

MENZEL BLEACHING/AFTER PRINT WASH

Year: 2016, 3.400 mm roller width.

AB55/260224D/RS-Y/F/AR/

Lafer Raising

Quantity: 2, Year: 2007, Width: 2600MM, Raising for Knitts, 24 Rollers, PLC and Invertor Controlled, Exit with Plaiter, Dust Extraction and Filter included.

AE02/220224/

Monti Antonio Calander Mod. 76

Quantity: 1, Year 2016
ww. 250 mm, dia. printing roller 300 mm, overfeeding roller for narrow fabrics
useful for transfer printing, direct ink reactivation, thermo fixation – machine was running only 2 years

AC23/210224E/AO-O/F/BM/

Daroitex DR7 Sanding Machine

Quantity: 1, Year: 1994, Daroitex DR7 ITALY, 7 sanging rolls, Working width 2400mm, Ac motorization: 380V 50Hz + inverters.
CONDITION IS LIKE NEW WITH LOW WORKING HOURS / SANDING PAPERS ARE NEW

AC23/210224E/AO-O/F/BM/

Lafer Raising

Quantity: 1, Lafer GRV-90 Duplex ITALY- Double Drum raising machine, CONDITION IS LIKE NEW WITH LOW WORKING HOURS/NEEDLES JUST NEWLY CHANGES. 24 + 24 raising cylinders, Working width: 1800 mm, Ac motorization: 380V 50Hz + inverters, Folder at exit.

AC23/210224E/RO-O/F/BM/

Bruckner Stenter

Quantity: 1, Year: 1987, MULTILAYER TYPE – VERTICAL CHAIN, Working width: 1800 mm, 60 meters of fabric total in the cabins , 12 BURNERS, Gas, PIN and CLIP, PADDER, MAHLO WEFT STAIGTENER, E+L Expanding device YOC: 2011.

AD92/160224E/SS.L-S.L/F/

KRANTZ Stenter

Quantity: 1, Year: 1995
w.w. 2.40 m, 8 chambers, gas, vertical chain, non-stop, Bianco padder, Bianco automatic weftstraightener

AE02/150224/

Benninger Beaming and Sizing

Quantity: 1, Year: 2000, Beaming width 5400 mm (max flange dia. 1600 mm), waxing device, gluing device, sizing kitchen, weft monitoring, 2 Benninger side by side beam creels ZA 16-2 (each beam width 1800 mm, max. flange dia. 1400 mm), single warp width 3600 mm, single size box (ww. 3600 mm), measuring roller, dip roller and squeezers, 2 cylinder dryer (8 and 6 cylinders), Mahlo humidity device, dryer unit (15 units)

AA10/120224/

BABCOCK Stenter Frame

Quantity: 1, Year: 1990, reconditioned 2018
table width 2000 mm.,
w.width 1800 mm., 6 compartments, gas heating, only pins chain,
RAMISH KLEINEWEFERS Padder yoc 1989,
MAHLO Weftstraightener mod.RFMC-10A

AB60/130224/

Transfer Calender MURATEX

Quantity: 1, Year: 2020, Type 800/3400mm working width 3400mm, automatic sewing unit and J box unit, merrow usa brand sewing machine, folding unit, motorized batching arm for A frames, fabric centering roll, extraction head, 2 pcs antistatic bars, cooling fan for fabric exit, hard chromium covered main drum.

AA02/100224/

Complete Denim Finishing Line

PAD STEAM & MERCERISING LINE:

1x KUSTERS-CALICO COMBINED PAD STEAM / MERCERISING LINE
Model CPSWR-CMR
Working width 2 meter

Comprised of:

Pad Steam:
Entry Scray
Tension rollers stands
E&L Air Guiders
4 Roller Brusher
4 Burner Singer
4 Roller Brusher
Dye Pad:
Kusters 2 Roller Dye Pad
Kusters Tight strand steamer with
28 top and bottom rollers
Kusters 2 Rubber roller pad

Mercerizing:
Kusters Roller Mercerizing with Bypass Lane
20 rollers

Washing:
7 Kusters Wash Boxes
Single lace with 5 top and 6 bottom rollers
Each with Rubber over Rubber Nip rollers
6 with 5-ton Nip and 1 with 10 Ton Nip capacity

Drying:
Tensioning stand
2 Stacks of Drying cans
Each with 12 cans x 2-meter-wide x 30-inch diameter
Steam heated

Exit:
E&L edge Guiders
With A Frame take up

Year: 2011

DENIM FINISHING & SANFORIZING:

1x KUSTERS-CALICO FINISHING RANGE
Model LF-SR-DWR-1282 3
Comprised of:
Entry Scray
Tension Bar
1 set of E&L Edge Guiders
1 set of Pull rolls
4 Roller Brusher
Operators’ platform
4 Burner Singer
4 Roller Brusher
Tensioning device
3 Kusters single lace wash boxes
Each with 5 top and 6 bottom rolls
And 5-ton Rubber over Rubber Nip Rollers on each box
1 Pre-Dryer with 6 cans, 2-meter x 30-inch diameter
Steam heated
1 Kusters Dye Padder Model LF-SR-DWR-1282.3 (no rolls)
1 Kusters Double Lace Wash Box
With 6 top and 4 bottom rollers
1 Kusters Resin Pad, single roller, inflatable
Model LF-SR-DWR-12823
1 Pleva Sensor control system
With AF.110 contact Free online measurement
Moisture RR .3 Mono with 3 Tandematic Sensors
Straight line SL2.1 with SD1C traversing camera
Drying with 2 stacks of 12 cans
78-inch face width x 30-inch diameter and
Tensioning Device
Year: 2011

With:
1x BRUCKNER SANFORIZER
Model Power Shrink GBK-FK18
Comprised of:
1 Bruckner Open Stenter
2-meter working with
With horizontal return
Clip chain
1 Bruckner Power Shrink Sanforizing Unit
With 2-meter-wide Rubber Belt
1 Bruckner 2 Drum Palmer
With Felt blanket
4 Cooling Cans 2 meters wide x 30-inch diameter
With KKTKRAUS refrigeration unit
Type KLB32T
Exit to Plaiter
Year: 2011

AA02/100224D/AIII/M/

PAD STEAM & MERCERISING LINE:

1x KUSTERS-CALICO COMBINED PAD STEAM / MERCERISING LINE
Model CPSWR-CMR
Working width 2 meter

Comprised of:

Pad Steam:
Entry Scray
Tension rollers stands
E&L Air Guiders
4 Roller Brusher
4 Burner Singer
4 Roller Brusher
Dye Pad:
Kusters 2 Roller Dye Pad
Kusters Tight strand steamer with
28 top and bottom rollers
Kusters 2 Rubber roller pad

Mercerizing:
Kusters Roller Mercerizing with Bypass Lane
20 rollers

Washing:
7 Kusters Wash Boxes
Single lace with 5 top and 6 bottom rollers
Each with Rubber over Rubber Nip rollers
6 with 5-ton Nip and 1 with 10 Ton Nip capacity

Drying:
Tensioning stand
2 Stacks of Drying cans
Each with 12 cans x 2-meter-wide x 30-inch diameter
Steam heated

Exit:
E&L edge Guiders
With A Frame take up
Year: 2011

AA02/100224D/TSL/M/

DENIM FINISHING & SANFORIZING

1x KUSTERS-CALICO FINISHING RANGE
Model LF-SR-DWR-1282 3
Comprised of:
Entry Scray
Tension Bar
1 set of E&L Edge Guiders
1 set of Pull rolls
4 Roller Brusher
Operators’ platform
4 Burner Singer
4 Roller Brusher
Tensioning device
3 Kusters single lace wash boxes
Each with 5 top and 6 bottom rolls
And 5-ton Rubber over Rubber Nip Rollers on each box
1 Pre-Dryer with 6 cans, 2-meter x 30-inch diameter
Steam heated
1 Kusters Dye Padder Model LF-SR-DWR-1282.3 (no rolls)
1 Kusters Double Lace Wash Box
With 6 top and 4 bottom rollers
1 Kusters Resin Pad, single roller, inflatable
Model LF-SR-DWR-12823
1 Pleva Sensor control system
With AF.110 contact Free online measurement
Moisture RR .3 Mono with 3 Tandematic Sensors
Straight line SL2.1 with SD1C traversing camera
Drying with 2 stacks of 12 cans
78-inch face width x 30-inch diameter and
Tensioning Device
Year: 2011

With:
1x BRUCKNER SANFORIZER
Model Power Shrink GBK-FK18
Comprised of:
1 Bruckner Open Stenter
2-meter working with
With horizontal return
Clip chain
1 Bruckner Power Shrink Sanforizing Unit
With 2-meter-wide Rubber Belt
1 Bruckner 2 Drum Palmer
With Felt blanket
4 Cooling Cans 2 meters wide x 30-inch diameter
With KKTKRAUS refrigeration unit
Type KLB32T
Exit to Plaiter
Year: 2011

AC44/070224/

Tensionless TUBE-TEX Dryer

Quantity: 1, Year: 2002, Roller width: 2.650 mm, Max. working width: 2400 mm, No. Of conveyor belts: 3, Heating system: Gas, Fabric contain: 30 meter, Machine modifyed electronically: 2010.

AB45/010224/

M-TEC CONTINOUS DECATIZING MACHINE

Quantity: 1, Year: 1994, Model SUPERFINISH 1, Type GFP 800
Finishing line Menschner (M-TEC) SUPERFINISH
Fabric entry frame + driving group
Rollers width 1800mm
delivery fabric in folding device
Connected to the Correfix 1000 weft straightener with pin wheels, as a part of the Finishing unit

AB45/010224/

Biella Continious Steaming Shrinking Machine

Quantity: 1, Year: 2022, model Ecovap 95
Cylinder width 1900 mm
Machine with Igrofast system and carbon brush builded in.
Igrofast drastically reduce used steam quantity
Vibro shrunk with humidifier ECOVAP KD
Suction and fans (ventilators) included

AD63/010224E/ACI-O/F/AQ/

Monforts Stenter

Quantity: 1, Year: 1995, Model: MONTEX 8F-TWIN-AIR, oller width: 2.400 mm, Entry from big roll or plate, MAHLO dogal centering device, Steamer in entry, Entry arm’s length: about 5,5 meters, Number of chambers: 6, Number of burners: 6, Number of fans: 12, Heating system: gas, Horizontal chain, Pin chain, Cooling device at the exit with air blowers, Fabric delivery: big roll or plate, Exhausters: 2, Suitable for woven and knitting fabrics.

AA10/290124E/ACS-S/M/AQ/

Babcock Stenter Line

1x Stenter line table width 3400 mm.,direct gas heating.
Axial winding system type Berico.
E&L
BETA Padder year 1995, table width 3400 mm., 3 cylinders dia.470 mm., differentiated squeezing.
Pre-Dryer at 2 compartments.
1x BABCOCK Stenter frame type 5000-4700 year 1995, 7 compartments, unilateral ventilation.
Selvedges Gluing basin + central basin.
Pins and clips chain with oil lubrification.
1x MAHLO Weftstraightener mod.RFMH-96H year 1995, 6 reading heads.
E&L
Air cooling unit.
Selvedges cutting group + central cutting.
Tangential winding arm.

AD63/280124E/AIL-CI/C/AQ/

Benninger Ben-Extracta Washing Line

Quantity: 1, Year: 1998, Cylinder width: 2000 mm. Useful working width: 1800 mm. Number of washing tanks: 3, Entry fabric with widening and dogal centering device, Fabric entry from plate or big roll, Fabric delivery in plate or big roll, Squeezing cylinders re-rubberised at end 2020, The machine can used for fabrics of width 190 cm. The machine is in very good condition and has done very little work. Machine is still erected but stopped. Machine can be inspected turned on, but not in running. Machine need N. 2 containers 40′ for shipping.
Note:
Installed power: about 60/65 Kw.
Please check the pictures of all electrical parts. With this machine there are some electrical spare parts available, including one of the main inverters.
As you can see in the picture number “PLC and Spare parts (2)”, the brand of the PLC is HUNI, a big company currently in working. The software is BEN-PROCESS, a BENNINGER software, as you can see in the picture number “PLC and Spare parts (2)”.

Machine is made up by n. 3 washing boxes, as you can see in the picture number “Drawing (1)”.
We supply this machine with all electrical diagrams and all spare parts available.

AB46/250124D/YY-T/F/AR/

Osthoff Singeing Machine

Quantity: 1, Year: 1994, Model : ST80, Max width 280cm
Note:
Machine is in good working condition and moved to warehouse from a factory that keeps very good maintenance of its machines.
Machine requires 1×40′ ctr for loading

AC44/220124E/YS-Y/F/AQ/

Monti THERMO PRINTING Transfer Calander

Quantity: 1, Year: 2019, Model: 855, Working width: 1800 mm, Machine has worked only for trails.

AI05/200124/

Monforts Montex Stenter

Quantity: 2, Year: 2000, 8 chambers, 2400mm, Horizontal chain, Mahlo fular.
1x hot oil, working condition, machine condition is good.
1x gas heated, dock shaking unit , cutting edge, working condition.

AC83/180124E/ARY.L-L/F/

Bruckner Stenter

Quantity: 1, Year 2003, 2,4 m Working width, 6 chambers, Foulard Bruckner, Mahlo weft straightener, Pin horizontal chain, Gas heated, 6 meter entry, Selvedge cutters, glueing, steaming, cooling at exit.

AA05/150124/

Wool Washing

Quantity: 1, 4 bowls, 1 dryer, With opener, w.w. 1000 mm.

AE56/160124/

Goller Mercerizing

Quantity: 1, Year: 2013, 240cm roller width, 7 Padder, 4 drum, For knitted fabric, Chain type, Connect power.

AB09/160124E/LRI-CI/M/AS/

Stenter Bruckner

Quantity: 1, Year: 2016, Type: POWER-FRAME HN SFP 18/8,, working width 1800 mm
High cloth entry ,padder Babcock, Pleava weft straightener, entyr 3.5 meter ,horizontal pin/clip chain
Gas heated , 8 x drying chambers, with Maxon gas burners BTT180,180 kW, cooling cylinder, Fabric delivery plaiter and batcher

AG54/150124/

Reggiani Digital Printer

Quantity: 1, Year: 2012, Printing height 3400mm,16 heads,8 colors,currently works in pigment,One section dryer,Fully functional.

AD92/150124E/TP-T/F/AY/

Unitech Double Raising

Quantity: 1, Year: 2015, w.w. 2.20 m, 28+28 cylinders

AC63/140124D/CCT-CI/M/

Tumbler Machine

Quantity: 1, Year: 2017, Maximum Working Width: 180 cm, Minimum Working Width: 70 cm, Maximum Evaporation Capacity: 600 kg/h H₂O, Production Speed: 3-50 mt/min, Heating system: Steam, Maximum Installed Thermal Power: 850 kw – 688,000 Kcal/h, Maximum Temperature of the Air: 150°C, Gas Line Connection: DN50 PN16, Steam Line Feeding Pressure: 8-10 bars, Average Steam Consumption: 600 kg/h, Steam consumption for fabric steaming 100 kg/h, Steam pressure for fabric steaming 3 bars, Compressed Air line: 1/2″, Compressed Air Feeding Pressure: 6 bar, Installed Power: 125 Kw, Average Absorbed Electrical Power: 65 kw, Electrical Line: V 380-480, trifase, Hz 50-60, Sizes (W x L x H): 4652 mm x 12077mm x 3472, Weight: 14.200 kg, RAL Colors: 7037 +7035.
Machine is like new and was purchased USD 230000 and Mahlo added at USD 60,000, total USD 290,000.

AE56/130124/

Karl Mayer Sizing

Quantity: 1, Year: 2011, Width 260cm, Double layer Warp beam creel, 12 pcs cylinder dia 800mm, Running condition.

AD63/120124/

Reggiani Rotary Printing

Quantity: 1, Year: 2010, Model UNICA, 8 colors, Oven gas heated, Useful working width: 1.850 mm, Conveyor belt width: 2,300 mm., Conveyor belt length: about 11,000 mm. Print heads: 640 – 960 mm. Complete with colors inlet pumps, Entry with double spreader, Suction for fabric cleaning, Double chamber oven gas heated with n. 3 passages.
Fabric entry by La Meccanica preparation machine complete with: Cradle with motorized rollers, Motorized accumulation belt, Double motorized spreader, Fabric delivery in plait.
Machine suitable for woven and knitting fabrics.

AD63/090124/

Salvade Continuous Steam Ager Steamer

Quantity: 1, Year: 2008, Working width 3400 mm, Model: VPM, Rollers width: 3.600 mm., Useful working width: 3.400 mm., Fabric content m. 250 mt., Kw installed 22, Volts 380/400, Hertz 50, Automatic steam regulation valves, Steam closing valves, Steam systems inside the machine, High temperature heating using steam batteries + electric batteries, Sticks rotation adjustment, Patented SALVADÈ SUPERWET type temperature and humidity control.

*AD26/260823E/APC-AT/F/AQ/

Reggiani Rotary Printing

Quantity: 1, Year: 1997, model UNICA, Working width 3200mm.
Reconditioned in 2005, entry with Accumulator fabric. 13 colours / cylinders with magnet roller-sqeezers.
Habasit rotary printing carpet , Length printing-plane 1.200-cm. Washing cylinders on board.
Crosta brushing & aspiration device.
Reggiani dryer 5 modules with 10 fans, 5 metan gas burners.
Entry & exit big rolls and folder. Still installed on mill floor.
1 Cominox washing printing-cylinders 4 positions , year 1998, 1 Cominox Washing rubber-sqeezers , year 1992.
Loading in 7-8 cont 40′.