AB64/240523/AO/
Tuftco 5/32″ Cut Pile Tufting
Quantity: 1
Year: 1989
MP
Mech
Working width: 5m
Straight
LH
Type: 52040589
Feed rolls: 4
Speed RPM: 800
Dtex Range: 1950/3900
Pile Height: 8 - 25
Creel: Creel
Pre winder: yes
Inspection: yes
Roll Up: 3 rolls
Yarn Feed: Front
Stitch Rate: 15-65
Good condition. Height can be modified to 40 mm (tuftco high speed) good machine.
WITH Primary Backing UNWINDER
1 x 40 FT HC container.
When the customer wants extra:
inspection + roll-up = EXTRA EUR 5.000 loaded in 2x 40' container.
Pile-height :
40 mm is %100 very easy to do on the machine
45 mm after some adjustment can be done
50 mm, the machine can not do
Machine was doing Grass before
8000 dtex is easy and machine can do, only some needles should be changed
Machine can easily be modified to GRASS (has 2 driven motors, necessary to pull that heavy yarn.)
Less needles are needed: 5/16” in case of 5/32”
New needles are required to change to Gauge 5/16" for 8000 dtex, number of required needles depend on if customer wants to use the machine in 4m width or 5m width.
Changing Gauge to 5/16 is easy and can be done by taking out half the Tufting needles.