AA08/021225/
Volkmann VTS 07 Double (2×1) Twisting
Quantity: 1, Year: 2000, Bauart 5.70, n.176 spindles, Feeding 8″ (200 mm) from assembly winder, Maximum feed bobbin diameter 178 mm, Exit 6″ (152 mm) – conicity 4°20′, Waxing device, Pneumatic threading, Yarn reserve – soft bobbin return, Single-control spindle speed- inverter, Dual-control twist adjustment, Inverter for spindle speed adjustment, Magitex.
AI95/031225/CL/
Volkmann VTS 07 Twisting
Quantity: 3
Volkmann VTS 07 Twisting
Suitable to make soft packages by increasing the overfeeding speed and by threading the yarn.
AI95/031225D/YP-AL/M/CL/
1x Year: 2014, 198 SPINDLES.
AI95/031225D/RT.L-AI/M/CL/
1x Year: 2008, 176 SPINDLES.
AI95/031225D/CA-O/M/CL/
1x Year: 2003, 176 SPINDLES.
AA08/041225/
Lezzeni Twisting
Quantity: 1, n.20 Spindles, Double-sided (10 + 10), One side with 4 casse-fils, One side with 8 casse-fils, Ring diam.140 mm, No external creel, Tube height 300 mm, Meter counter, Inverter, Flanged spools supplied.
AA05/191225/
Volkmann 2×1 Twisting VTS-06S
Quantity: 1, Year: 1996, Type 4.21, 80 positions, Pot día 230 mm., 8″ feeding, 6″ delivery, 5°57′ conicity.
AB46/310326/AR/
Oerlikon Saurer Cabler
AB46/310326D/PC-O/F/AR/
Volkmann VTS 05-0-C Twisting and Cabling (Oerlikon Saurer Cabler)
Quantity: 6, Year: 2013, Model 05-0-C, 144 spindles, 500 gauge, POT diam 295mm, Alligator tensioners in Creel
Design / Version (Bauart): 8.02
2 drive motors per machine
AB46/310326D/TA-T/F/AR/
Volkmann VTS 05-0-C Twisting and Cabling (Oerlikon Saurer Cabler)
Quantity: 5, Year: 2010, Model 05-0-C, 144 spindles each, 500 gauge, POT diam 295mm, Alligator tensioners in creel
Design / Version (Bauart): 8.02
2 drive motors per machine
Machines are still on Mill Floor
AB46/281225/
ICBT CD510 Wide Gauge Carpet Cablers
Quantity: 6, Year: 2002, 144 spindles each, 500 gauge, Model CD510, (Made in France), Power Supply: 3 Phase, Voltage is 575 VAC / 3 Ph / 60 Hz, Rated Current: 155, Maximum Current: 200 A, Air Pressure: 5 bar, Air Consumption: 1 m³/hour.
AB46/281225/
Rieter ICBT Rieter Wide Gauge Carpet Cablers
Quantity: 6, (Made in France), Model CD510, 128 spindles, 500 gauge, Alligator tensioners in creel, Electrical Diagram No : 100136B04, Power Supply: 3 Phase, Voltage: 575 V, Frequency: 60 Hz, Rated Current: 155, Maximum Current: 200 A, Air Pressure: 5 bar, Air Consumption: 1 m³/hour.
AB46/281225/
Swisstex Filament Yarn Technologies
Quantity: 1, Year: 2011 , Model CDDT 20-V3, 144 spindles, 500 gauge, (Made in France), Machine Type – CDDT20-V3, Alligator tensioners in creel, Electrical Diagram No : 100474B00, Power Supply: 3 Phase, Voltage: 480 V, Frequency: 60 Hz, Rated Current: 230, Air Pressure: 5 bar, Air Consumption: 1 m³/hour.
AB46/281225/
Saurer Volkmann 05-0-C-F Twisting
Quantity: 2, Year: 2018, Type: 05-0-C-F, Design / Version (Bauart): 8.05.
AA02/100226/
Cotton Carding, Drawing, Combing, Winder, Doubling & Twisting Machines
CARDING:
AA02/100226E/YCI-CI/M/
28x TRUETZSCHLER CARDS
Model DK 803, Year of Manufacture 1996 to 1998, Chute Feed, Can Coiler, 1000 x 1200mm.
AA02/100226E/LC.L-C.L/M/
4x TRUETZSCHLER CARDS
Model DK 903, Year of Manufacture 2002, Chute Feed, Can Coiler, 1000 x 1200mm.
AA02/100226E/TR-R/M/
6x TRUETZSCHLER CARDS
Model DK 760, Year of Manufacture 1993 & 1995, Chute Feed, Can Coiler, 1000 x 1200mm.
DRAWING:
AA02/100226E/CAI-AI/M/
4x RIETER BREAKER DRAW
Model SB.D24, Year of Manufacture 2018, Double Headed, Creel for 6 Rovings, Can Size 600 x 1200mm, Auto doffing, Can Size 600 x 1200mm.
AA02/100226E/LCL-CL/M/
8x RIETER FINISHER DRAW FRAMES
Model RSB.D-22, Year of Manufacture 2018, Double Headed, Auto Levellers, Creel for 6 Roving, Can size 500 x 1200mm, Auto Doffing, Can Size 500 x 1070mm.
COMBING:
AA02/100226E/CIL-AI/M/
RIETER LAP WINDER & RIETER COMBS
1x RIETER LAP WINDER
Model E.32 Unilap, Year of Manufacture 2006, Double Head, Automatic lap doffing.
3x RIETER COMBS
Model E.65, Can Size 600 x 1200mm, Year of Manufacture 2006, 8 Heads, Automatic Doffing.
WINDERS:
AA02/100226E/RC-C/M/
2x SCHLAFHORST AUTOMATIC WINDERS
Model 338, Year of manufacture 2005, 60 Positions, CBF Automatic Feed, Loading Tray, Uster Quantum clearers, Air Splicers.
AA02/100226E/CS-A.L/M/
2x SCHLAFHORST MAGAZINE WINDERS
Model 338, Year of Manufacture 2002, 60 Positions, Round Magazine Feed, Uster Quantum clearers, Air Splicers.
DOUBLING AND TWISTERS:
AA02/100226E/CT-A/M/
6x SSM DOUBLER WINDERS
Model FX, Year of Manufacture 1996.
AA02/100226E/RC-C/M/
3x SSM DOUBLER WINDERS
Model DP1 D, Year of Manufacture 2002.
AA02/100226E/YA-C/M/
12x SAVIO TWO FOR ONE TWISTERS
Model Gemini BF 261, Year of Manufacture 2005, 204 Positions, 175mm Pot Diameter.
AA02/100226E/RP-C/M/
14x SAVIO TWO FOR ONE TWISTERS
Model Gemini BF 301, Year of Manufacture 2005, 176 Positions, 175mm Pot Diameter.
AA23/310126E/CT-L/F/
Ratti Twisting R341/56/7 NT260
Quantity: 1, Year: 2004
twisting machine used for yarn 466-3300 dtex
Ratti are able to wind on any kind of tubes. Standard is tubes inner dia 75 mm, length 300 mm. It is not limited with the diameter of the tube – the plates that hold the tube are changable.
We have tried a standard tubes for RPR (inner dia 56 mm on one side, 60 mm on other side, length 230 mm) and it was ok.
The winding length could be redone on smaller winding length, and we have tried to change it to 190 mm (with special plates to hold the tube).
We think that only limit is the lenght between the plates and we think it is 300 mm.
AB15/200126/AX/
Savio Twisting Machines Duo Pot system
Savio Sirius 254c 2020 2 for 1 twisting 208 spindles, Magitex blower, Mesdan air track splicers – installed 2021
Savio Sirius 254c 2020 2 for 1 twisting 208 spindles, Magitex blower, Mesdan air track splicers – installed 2021
Savio Geminis 244c 1999 2 for 1 twisting 180 spindles, Magitex blower, Mesdan air track splicers – Basket ø 185mm
Savio Geminis 244c 1999 2 for 1 twisting 180 spindles, Magitex blower, Mesdan air track splicers – Basket ø 185mm
Savio Geminis 244c 2000 2 for 1 twisting 180 spindles, Magitex blower, Mesdan air track splicers – Basket ø 185mm
Savio Geminis 244c 1999 2 for 1 twisting 200 spindles, Magitex blower, Mesdan air track splicers – Basket ø 185mm
Savio TDS15N 1993 2 for 1 twisting 220 spindles, Magitex blower, Mesdan air track splicers – Basket ø 165mm
Savio TDS15N 1993 2 for 1 twisting 220 spindles, Magitex blower, Mesdan air track splicers – Basket ø 165mm
AA03/170226E/CY-C/F/BY/
Volkmann VTS 06 S Two for One Twisting
Quantity: 1, Year: 1989, Type VTS-06-S, Bauart 4.60, 88 spindles, pot diameter 230mm, With extra height for feeding assembling cones until 12”, tubes length until 330mm, Delivery: 10“ traverse, cones 270-290 mm length, Airthreading Volcojet, conveyor for full cones in the middle of machine, Overhead cleaner, Motor 30kW, 380V/3Ph/50HZ, good condition.
AA30/240326/
Barmag DD2000GT Twisting
Quantity: 1, Year: 2018, 24 spindles
800mm pitch
330 dia pot
Flyer
Delivery 300mm traverse 300mm dia
AA30/240326/
Barmag STC DD2000GT Twisting
Quantity: 1, Year: 2019, 24 spindles
800mm pitch
330 dia pot
Flyer
Delivery 300mm traverse 300mm dia
AB74/300326E/SP-P/F/AO/
Volkmann CarpetTwister / CarpetCabler
Quantity: 1, Year: End of 2017, Type: VTS-05-0-F / VTS-05-0-C-F, Series: 8.02
Configuration
Number of spindles: 160, Number of sections: 20, Spindle gauge: 445 mm, Balloon limiters: without, High energy saving spindle E-260
Overall dimensions
Overall length: approx. 39.77 m, Overall width: approx. 1.50 m, Overall height: approx. 2.69 m
Technological data
Material: 100% PP, Range of counts: dtex 1200 – dtex 3800
Range of twist:Up-twisting: 40 – 710 t/m, Cabling: 20 – 355 t/m, Twist direction: S + Z
Untwisted yarn (feed packages)
Package type: cylindrical feed packages
Traverse: 10″ (254 mm), Tube length: 290 mm, Inside diameter of tube: 73 mm, Maximum outside diameter: 260 mm
Net yarn weight (approx., depending on yarn quality and package density): 5.0 kg
Twisted yarn (take-up)
Package type: cylindrical cross-wound bobbins
Traverse: 10″ (254 mm), Tube length: 290 mm, Inside diameter of tube: 73 mm
Maximum outside diameter (approx.): 350 mm
Main drive
Driven by two short-circuit squirrel-cage induction motors (one motor per machine side) with frequency inverter
Output: 2 × 37 kW, Voltage: 220/380 V, 3 phases, 50 cycles (to be confirmed in case of order)
Full motor capacity achievable if installation height does not exceed 1000 m above sea level and ambient temperature does not exceed 40°C
Electrical control
Electrical control located in the switch gear cabinet
Reversion of twist direction from S to Z manually
Drive connected via intermediate drive onto two main drive shafts, located in front of the spindles for easy access
Spindle speed controlled by frequency inverter
Terminal displaying spindle revolution, delivery speed, turns per metre and crossing angle
Spindle drive
Individual spindle drive by endless tape with 180° contact to spindle whirl, easily exchangeable
Tape tension released when spindle is stopped
No mechanical friction between tape and drive pulley due to air cushion
Gear section
One individual gear per side
Gear drive for adjusting: Turns per metre
Take-up tension (pre-take-up), Angle of crossing of take-up packages
Special cam-driven traverse motion for high-speed take-up, including anti-patterning device
Volkmann spindle (two-for-one and cabling spindle)
Maintenance-free spindle, rigidly fixed to spindle rail, with two yarn channels:
One for two-for-one twisting, One for direct cabling
Spindle rotor statically and dynamically balanced
Reserve discs with anti-wrap collar to avoid yarn wraps around the whirl in case of ends down
Stationary protection pot held by permanent magnets with tension device
Separators between individual spindles
Machine equipped with Volcojet
Machine without balloon limiters
Take-up
Adjustable pre-take-up per machine side to vary take-up tension and package density
Adjusting range: 60%, Traversing thread guides, self-threading, fixed on traverse rod
Drive of packages by friction rollers
Pivotable balloon thread guides with enclosed ceramic eyelet, height adjustable per section
Device for producing hard and soft packages
Cradle
Swivelling, spindleless four-bar cradle with special pressuring device to ensure uniform density throughout package diameter
Centering discs for take-up tubes, simple ball-and-socket type bearing, easily exchangeable for different tube dimensions
Machine colours
Textured paint, Principal colour: Light grey NCS S 0510-R90B
Secondary colours:Traffic grey B NCS S 7502-B, Red NCS S 1080-Y90R, Anthracite grey NCS S 8502-B
Note: Machine is professionally dismantled, packed and warehoused by Volkmann technicians. with energy reduction
AC86/140226/
GIUDICI Twisting
Quantity: 3, Year: 1993, Model: Torcitoio Giudici TG 3 Duplex, 60 spindles each, DTpiatto 270mm
number collected: 60, on a long tube: 230/280, maximum tube diameter (56): 26, with power supply, Twisting machine power supply type: positive, With automatic lifting: No, Zetta/Traverse: mechanical, machine length (m): 10, Machine width (m): 1.1, CONDICTIONS PERFECT
AJ05/140226/AQ/
GIUDICI Twisting
Quantity: 1, Year: 2000, Model: RDM 1200, Heads: 24, Status: running.
AJ05/140226/AQ/
GIUDICI Twisting
Quantity: 1, Year: 2000, Model: RG6B, Heads: 24, BTSR cleaners: 24, Status: running.
AJ05/140226/AQ/
Hamel Saurer ET 2020 Twisting
Quantity: 1, Year: 1988, Model: ET 2020, Elasto Twist, Spindles: N° 154, Creel: one on the side, one above, Length: mt21, Nominal voltage: 400V, Inverter, Nominal current: Max 106A, Pot dia. 135mm, S/Z Twist Traverse 6″, Plastic cone: 56x170mm, Made in Switzerland, Status: running.
AJ05/140226/AQ/
Hamel Saurer ET 2020 Twisting
Quantity: 1, Year: 1988, Model: ET 2020, Elasto Twist, Spindles: N° 142, Creel: one on the side, one above, Length: mt19, Nominal voltage: 400V, Inverter, Nominal current: Max 106A, Pot dia. 135mm, S/Z Twist Traverse 6″, Plastic cone: 56x170mm, Made in Switzerland, Status: running.
AJ05/140226/AQ/
Hamel Saurer ET 2020 Twisting
Quantity: 1, Year: 1988, Model: ET 2020, Elasto Twist, Spindles: N° 214, Creel: above, Length: mt26, Nominal voltage: 400V, Inverter, Nominal current: Max 106A, Pot dia. 135mm, S/Z Twist Traverse 6″, Plastic cone: 56x170mm, Made in Switzerland, Status: running.
AJ05/140226/AQ/
Hamel Saurer ET 300 Twisting
Quantity: 1, Year: 2000, Model: ET 300, Elasto Twist , Spindles: N° 214, Length: mt26, Nominal voltage: 400V, Inverter, Nominal current: Max 106A, Pot dia. 135mm, S/Z Twist Traverse 6″, Plastic cone: 56x170mm, Made in Switzerland, Status: running.
AJ05/140226/AQ/
Hamel Saurer ET 300 Twisting
Quantity: 1, Year: 2000, Model: ET 300, Elasto Twist , Spindles: N° 214, Length: mt26, Nominal voltage: 400V, Inverter, Nominal current: Max 106A, Pot dia. 135mm, S/Z Twist Traverse 6″, Plastic cone: 56x170mm, Made in Switzerland, Status: running.
AJ05/140226/AQ/
Hamel Saurer ET 300 Twisting
Quantity: 1, Year: 2000, Model: ET 300, Elasto Twist, Spindles: N° 60, Creel: on the side, and above, N° 30 spindles with BTSR Feeder, Length: mt9, Nominal voltage: 400V, Inverter, Nominal current: Max 106A, Pot dia. 135mm, S/Z Twist Traverse 6″, Plastic cone: 56x170mm, Made in Switzerland, Status: running.
AJ05/140226/AQ/
Hamel Saurer H 1000 pre Twister
Quantity: 1, Year: 1990, Model: H1000 pre twister, Spindles: N° 60, BTSR sensors on all spindles, Length: mt 15, Creel: on both sides, Nominal voltage: 400V, Nominal current: Max 106A, Made in Switzerland, Status: running
AA10/240226/
LEZZENI Twister Double Twisters
LEZZENI Twister Double Twisters
Quantity: 1, Year: 2005, mod.TBR/DL 3 x1 DELTA , take up 80 spindles (40×2), gauge 300 mm., ring dia. 150 mm, 240 feeding spindles.
LEZZENI Pirn winders
Quantity: 1, mod. SLV, 20 spindles (10×2), countermeters
AC29/220226E/ACS-AS/M/AS/
Volkmann VTS05 Twisting Cabling
Quantity: 2
One machine Year: 2011
2×80 = 160 spindles
Each Side has one motor
One machine Year: 2012
2×72= 144 spindles
Each Side has one motor
AH55/250226E/AI.L-C/M/
RPR Winding
Quantity: 3, Year: 2000-1997, MOD.GRE, No spindles: 40 each, Feeding tube: 300mm, Delivery bobbin: 290mm, Voltatge: 380V, 50 HZ, 3Kw.
AH55/250226E/P.L-C/M/
Galan MONOBLOCK Twisting
Quantity: 1, Year: 2015, MOD.360/2, No spindles: 2, Voltatge: 400V-III-N-T, 50 HZ., Ring: 250, Tube: 450, Power: 3.4Kw, Air pressure: 6 BAR, No. of part: 010454, Air volume: 0.4L/h.
AH55/250226E/AR-C/M/
SSM DIGICONE Doubling Twisting
Quantity: 1, Year: 2015, MOD.DURO-TW, No spindles: 2 , Voltatge: 380, 50 HZ., Transmission: Individual, Rpm: Up to 1.500 m/min, Count range: Up to 50.000 dtex.
AA10/240326E/CS.L-C.L/F/AQ
PAFA Hollow Spindle Fancy Twister
Quantity: 1, Year: 2000, mod.EXPO, 30 spindles, 2 drafting systems, take up tube 8″
Machine stopped March 10.2026
AA10/250226/
VOLKMANN 2×1 Twister VTS 07
VOLKMANN 2×1 Twister mod.VTS 07 Bauart 5.60,
Quantity: 1, Year: 1998, 160 spindles, feeding 2×6″ with daisy device and 8″ (200 mm) from assembly winder, exit 6″ 4°20, waxing device, pneumatic threading, Inverter
VOLKMANN 2×1 Twister mod. VTS 07 Bauart 5.70
Quantity: 1, Year: 2000, 176 spindles, feeding 8″ (200 mm) from assembly winder, exit 6″ 4°20, waxing device, pneumatic threading, Inverter
AG88/170326E/TOL-LI/M/AS
SAVIO SIRIUS TWISTING
9 PCS. SAVIO SIRIUS TWISTING 251 BF TFO 208 DRUMS, 4x 2018 – 5x 2022.
Bobbin Height: 17CM (suitable with 420 bobbin)
Can Diameter: 18CM
Capacity: 280/300 KG/machine/day
RPM: 9.000
Twist: 550
AI55/110326/
Double Twist SAVIO. model TDS 265
176 spindles – double-sided
Pneumatic threading.-Mechanical waxing.-Infeed: 10″ cylindrical tube
Outfeed: 5°, 57″ and 6″ cones.-Basket diameter: 250 mm.-Mobile blower
Year: 1991
AC86/270326/AQ
SAUER 160-spindle twisting machine, VOLKMANN VTS 08
170-spindle basket, 6 x 4.20 outlet, 6-inch feed.
AA03/310326/BY
Volkmann VTS 08 & Assembly Winders
assembling winder, FMX-T-HED, Mettler (SSM), 1990, spindles: 72, Feeding: 2-ply outstanding creel, Exit Tubes: cylindrical 195mm
assembling winder, Rite A.G.R, Rite, 1992, spindles: 42, Feeding: 2-ply outstanding creel, Exit Tubes: cylindrical 195mm
two for one twister, DD VTS 08, Volkmann, 1991/2022 with inverter, spindles: 180, Feeding: assembling cones 195mm, Exit Tubes: cylindr. / conical 6″, waxing
two for one twister, DD VTS 08, Volkmann, 1991/2022 with inverter, spindles: 180, Feeding: assembling cones 195mm, Exit Tubes: cylindr. / conical 6″, waxing
two for one twister, DD VTS 08, Volkmann, 1991/2022 with inverter,spindles: 180, Feeding: assembling cones 195mm, Exit Tubes: cylindr. / conical 6″, waxing
two for one twister, DD VTS 08, Volkmann, 1991/2022 with inverter,spindles: 180, Feeding: assembling cones 195mm, Exit Tubes: cylindr. / conical 6″, waxing
two for one twister, DD VTS 08, Volkmann, 1990,spindles: 12, Feeding: assembling cones 195mm, Exit Tubes: cylindr. / conical 6″, waxing