AA03/041224E/CY-L/F/
Assembling Twister Hamel
Quantity: 1, Year: 1996 , Type H1000-20, 2 x 36 = 72 spindles, ring-diam. 145 mm,with 3 flange-bobbins each spindle, diam. 130 mm,
high 280 mm between flanges, weight depends of material until 2,-kg,
1 motor each spindle, with inverter, meter-counter,
creel on the machine, good condition,380V/50HZ,still running
AH67/031224E/LS-Y/F/AY/
Volkmann TFO VTS-07 Trend Twister
Quantity: 1
Year: 2000
Double twist twister for spun yarn
192 spindles (8+8 spindles per section)
Informator for programming work data
Dual control (allows different twisting and speed on each side)
Possibility of dividing the machine into three groups on each side of the machine, which allows working up to three twists and three different speeds on each side of the fan.
Yarn guide movement is common by each side of the machine
1 individual rotating motor in each spindle
Start/stop button on each spindle
Electronic sensor/yarn presence probe w/ automatic spindle stop in case of breakage
Pneumatic yarn feeding
Fedding bobbin up to 10″ coming from assembly winder
Device for forming of soft packages, if desired for dyeing
Output pachages of 6 inches (152mm of wire winding)
Possibility of forming conical bobbins 4º 20; 5°57, or cylindrical bobbins as desire
Lateral reserve of yarn for weaving preparation
Automatic package lifting with blockage aplet
Top creedle with supports for empty cones or full packages
MAGITEX traveling blower with box for centralized discharge with timer
Longitudinal tape with micros for emergency stop of the machine in case of need
Inverter speed drives for electronic introduction of torsion and spindle speed
RPM 9,000 (18,000 double twist)
Minimum TPM 80
In excellent maintnance condition and functioning.
Machine lengths 21940mm
Voltage 380v.3c.50hz.
NOTE; Machine professionally dismantled, and moved to warehouse.
AG33/021224/
Saurer Allma Cablecorder Twister
Quantity: 1, Year: 1998, 64 positions, 290mm pot, ~10″ traverse takeup, 2 position overhead creel, center doffing conveyor.
AH54/021224/DU/
Power Heatset & Volkmann/Saurer “”Twisting & Cabling 05-0-C””
Power Heatset
Quantity : 3
Year: 2005,2006,2010
Type: GKK 5000
Head Number: 48
Capacity in ton @ 2000 dtex and 85 tpm: 5.2
All machines are in running condition and well-maintained.
All these heat set lines are in excellent condition, excellent Gillbos winders with separate reserve accumulators for each end/position which give you the flexibility to run, and also great quality of PA6 heat set yarn. You know very well if PA6 yarn keeps/stays longer (unequal times in the oven under high temperatures, during doffing etc..) will create big issues in bulk, crimp, and printing of this yarn and it will create “lines” on the carpet design after printing… with this kind accumulators on the winder that risk is minimized.
Also, with accumulators on the Gillbos winder, there is no drop off production output during doffing time… yarn continuously passing the oven and accumulates during each doffing time etc…
Heat set yarn from Power Heat Set lines are always more bulky than heat set yarn from Superba, better carpet coverage etc…
Volkmann/Saurer “”Twisting 05″”
Quantity: 3
Year: 2003
spindles: 120
Capacity in ton @ 2000 dtex and 85 tpm: 3.3
2 big motors with 42 kw each
All machines are in running condition and well-maintained
Volkmann/Saurer “”Twisting & Cabling 05-0-C””
Quantity: 17
Year: 3×2003-12×2006-2×2005
spindles: 120
Capacity in ton @ 2000 dtex and 85 tpm: 3.3
Machines Year 3×2003- 4×2006: 2 big motors with 42 kw each
Machines Year 2×2005- 8×2006: 2 big motors with 52 kw each
All machines are in running condition and well-maintained
AH54/021224/DU/
Volkmann/Saurer “”Twisting & Cabling 05-0-C””
Quantity: 17, Year: 3×2003-12×2006-2×2005, spindles: 120
Capacity in ton @ 2000 dtex and 85 tpm: 3.3
Machines Year 3×2003- 4×2006: 2 big motors with 42 kw each
Machines Year 2×2005- 8×2006: 2 big motors with 52 kw each
All machines are in running condition and well-maintained
AD79/261124/BH/
Volkmann FT (Fusion Twister) VTS09 HE
Quantity: 4 , Year 2011, 240 spindles, Pot Dia 146mm, Spindle Gauge 198mm,
with Balloon control, 12 section machines,
Spindles speed 13,500~27000RPM,
Height 1362mm x Width 600mm x Length 28509mm,
AA05/211124/BT/
Savio Geminis Twisting
Quantity: 8, Year: 1998/2005, mod. 202.A
4 mcs 288 heads each (1998/9)/ 4 mchs 336 heads each ( 2005), Electronic head Twistronic, Dualdriver, Feeding 8” coupled diam. Max.140 mm. Pneumatic threading, Second overfeed roller, Yarn reserve, Exit 6” 4°20’, Drum with a rubber, Travelling blower Magitex, 380V 50Hz.
AD65/201124D/RO-O/M/
Geminis S Twistings
Quantity: 10, Year: 2002, 208 head, 6 inch feed and delivery, 17.5 cm pot dia. Traveller blower.
AA10/201124E/OL-L/M/
Savio 2×1 Twisters & Fadis Assembly winder
Savio 2×1 Twisters
Quantity: 2, Year: 1998, mod.GEMINIS 242B , 120 spindles (60×2), feeding 8″ cylindrical, flyer, delivery 6″, 4°20, air threading device, blower, without Inverter.
Fadis Assembly winder
Quantity: 1, Year: 1997, mod.FA , 12 heads, delivery 8″ cylindrical, 3 ends, external creel.
AA10/201124E/LY-Y/M/
Savio 2×1 Twisters
Quantity: 2, Year: 1995/1981, mod. TDS 190M , 372 spindles each, Feeding 8″, delivery 6″, 4°20, air threading device, blower.
AI30/121124/
Ratti Twisting Machine for Polyester
96 spindles, Feeding: 225mm , Exit: tube of 230 d.56 , inner pot: 225mm, running
AD65/081124D/AO.L-Y/F/AS/
Volkmann VTS 09–S-0 Twistings
Quantity: 16, Year: 1995, 160 head, 14.5 cm pot dia, 6 inch feed and delivery.Compact model, Fee balon, 30 kw
AA10/041124/
Savio Twisters & SSM Assembly Winder
AA10/041124E/TA-T/M/
3 SAVIO 2x1 Twisters of which:
(2) mod. TDS-15N yoc 1984, each 240 spindles (120x2)
(1) mod. TDS-15N yoc 1991, 200 spindles (100x2), Inverter, splicer Mesdan,
Feeding 160 mm., Pneumatic air threading device, delivery 6”, 4°20, bobbin lifter, yarn reserve.
AA10/231024E/AA-R/M/
CIMI Vacuum Steamer mod.VAPORFIX VCA/A
Year: 1999, atm, temp. 98°C., dia.1500 mm. x 3000 mm., 2 trolleys, capacity 200 kgs.-max 400 kgs., gas oil boiler.
Please note that SSM Assembly winder is under option but machine is not complete only 15 heads are running
AC29/301024E/OO-O/F/AS/
Volkmann VTS05-C Twisting and Cabling
Quantity: 3, Year: 2×2003 – 1×2004, 144 Spindles.
AC29/301024E/ALY-AY/F/AS/
Volkmann VTS05-C Twisting and Cabling
Quantity: 2, Year: 2017, 170 Spindles.
AA03/230924E/CS-L/F/
Volkmann VTS-07 Twistings
Quantity: 3, Year: 1996, Two for one twister, Bauart 5.10, General overhauled in 2018, 144 spindles, Feeding: assembling bobbins 6-7”, tubes length until 205 mm, Diameter until 175 mm, pot diameter 185 mm, Delivery: conical and cylindrical tubes, length 170mm, 6” traverse, diameter until 350 mm, 2-3 kg, bobbin lift by yarn break, air threading Volcojet, waxing device, spindle speed 2.600-5.500 tpm. Very good condition, machines have run only few years in 2 shifts, still running.
AC29/151024/AS/
Neumag S Plus BCF Line & Volkmann Cabling & Superba Heatset
AC29/151024E/ASLI/M/AS/
1X Neumag S Plus, BCF line:
Year: 2017
""Mono Color & Tri Color""
Polyester and polypropylene
6 extruders
6 winders
6 dosing
It is a high quality machine.
15 tons
NOTE: Machine has 6 extruders, each has 2.5 tons capacity at 2000 dtex
Therefore production capacity can be adjusted depending on the use of one to six extruders.
AC29/151024E/ATI/M/AS/
3x Volkmann Cabling:
Year: 2017
176 spindles.
AC29/151024E/YPI/M/AS/
1x Superba Heatset:
Type: TVP3
Year: 2017
72 spindles.
Capacity of neumag is 15 tons
Capacity of cabling 10 tons
Capacity of heatset 7.5 tons
Usually factories dont heatset or twist al the yarns that is produced by the Extrusion Lines. If needed later we can give you more Volkmanns. Finding Volkmanns is not hard.
We can do dismantling and loading and packing with good boxes.
Dismantling and loading and good packing like new. 100.000 Eur.
Duration of the works approx 5 weeks.
Crane and forklift is included.
Installation and start up 110.000 Eur.
Duration of the works approx 9 weeks.
For installation and start up, crane and forklift and hotels and flights and foods are not included and are on purchaser's account For installation we will send 4 to 5 technicians and host factory should provide 6 workers to help them.
AC29/151024/AS/
Neumag S Plus BCF Line & Volkmann Cabling & Superba Heatset
AC29/151024E/ATLI/M/AS/
1X Neumag S Plus, BCF line:
Year: 2018
Mono Color
Polyester and polypropylene
3 extruders
6 winders
15 tons
NOTE: Machine has 3 extruders, each has 5 tons capacity at 2000 dtex
Therefore production capacity can be adjusted depending on the use of one extruder or 2 or 3 extruders.
AC29/151024E/ATI/M/AS/
3x Volkmann Cabling:
Year: 2017
176 spindles.
AC29/151024E/YPI/M/AS/
1x Superba Heatset:
Type: TVP3
Year: 2017
72 spindles.
Capacity of neumag is 15 tons
Capacity of cabling 10 tons
Capacity of heatset 7.5 tons
Usually factories dont heatset or twist al the yarns that is produced by the Extrusion Lines. If needed later we can give you more Volkmanns. Finding Volkmanns is not hard.
We can do dismantling and loading and packing with good boxes.
Dismantling and loading and good packing like new. 100.000 Eur.
Duration of the works approx 5 weeks.
Crane and forklift is included.
Installation and start up 110.000 Eur.
Duration of the works approx 9 weeks.
For installation and start up, crane and forklift and hotels and flights and foods are not included and are on purchaser's account For installation we will send 4 to 5 technicians and host factory should provide 6 workers to help them.
AC29/101024/AS/
Superba Space Dyeing & Volkmann Cabling
1x Superba, Year: 2017, 72 spindles.
3 or 4 Cabling Volkmann, Year: 2017, 176 spindles.
AB46/011024/AR/
Volkmann VTS – 05C Cabler/Twister
Quantity: 1, Year: 1986, Type 4, 120 spindles, 10” traverse cone, 10” feed package, air threading.
AB46/011024/AR/
Volkmann VTS – 05 Twister
Quantity: 1, Year: 1986, Type 4, 120 spindles, 10” traverse cone, 10” feed package, air threading.
AA03/230924E/AA-C/F/
Volkmann Two for One Sample Twister VTS-08
Quantity: 2, Year: 1991, Model 4.11, 168 spindles, pitch 205 mm, pot-ø 157 mm, feeding: assembling cones 6-7“, Delivery: 6“ con. tubes 4°20 or cylindric, diameter 280 mm max weight 3.200 gr, Volcojet-air threading, yarnbreak-control, automatic Lift of cones, by yarnbreak, Softwinding device for dye-cones, speed 12.000 tpm, 380V, 3 Ph/50 HZ, good condition.
AC29/180924/AS/
Volkmann Cabling & Superba TVP3 Heatset
AC29/180924E/ATY-AY/M/AS/
3x Volkmann Cabling
Year: 2017, 176 spindles.
AC29/180924E/LYI-YI/M/AS/
1x Superb TVP3
Year: 2017, 72 spindles, Suitable for pp and Polyester.
AF08/190924D/RO-O/F/
RPR Two For One Twisting Machine
Quantity: 3, Year: 2000
-2 sets with model of GC96DF, with heater, heater high of 500 mm.
-1 set with model of GC96D.
very good condition , equipped with invert device, spindles type of DT 140 mm, cops type, take up tube length of 230 mm, take up package of 3 Kg, each set with 120 spindles.
AA10/120924/
WELLER Twister
Quantity: 1, Year +/- 1985, 2 x 84 spindles
ring dia. 120 mm, tube: 450 mm, 1 side is not complete, need to be checked
AA02/170924D/ASI-CI/F/
Saurer Alma Ring Twisters
Quantity: 7, 144 Spindles/machine, Single Creel each machine, 6 ¾” Ring Inside Diameter, 7” outside diameter, Uses a 5 ¾” Diameter Bobbin, Bobbin capable of a 14” Traverse, Running 840 to 1260 denier nylon and polyester, Have run fibrillated polypropylene, 600 volts.
with: 40x TWISTING PIN TRUCKS, 72 Position w/ bobbins. 6 ¾ Center, (36) Pins per side . 3,024 FLANGED BOBBINS.
AA07/070924/
Volkmann VTS 05-C Twisting/Cabling & Power Heatset
1x Volkmann VTS05, Year: 2017, 144 spindles, PP PET Nylon.
1x Power Heatset, Year: 2006, 48 ends, PP PET 300 ton pro month.
MF4, Year: 2006/2007
1x sample machine is 2006.
Stopped.
AA10/040924/
Lezzeni Double Twisters
Quantity: 1
Year: 1992
Double twisters TBRH/400 3 x 1
Feeding system positive drive
Machine with:
Feeding: 180 spindles, suitable for bobbin: run 260 mm., flange dia.110 mm.
Take up: 60 (30×2) spindles, gauge 400 mm., ring dia.165 mm., on flanged bottle : run 360 mm base flange dia.145 mm., top flange dia.105 mm.
1x LEZZENI pirn winder Mod. SLV, yoc 1992, 46 (23×2) spindles.
Can be used for spare :
1 LEZZENI Twister double twisters TBRH/400 modify in BR without top spindle yoc 1987, feeding system positive drive , Take up 60 (30×2) spindles, gauge 400 mm., feeding 3 ends , ring dia.165 mm., take up on flanged bottle : run.360 mm., base flange dia.145 mm., top flange dia.105 mm.
AA02/200824D/COY-AI/M/
Saurer Allma Technocorder Twisters
Quantity: 2, Year: 2007, Model TCS.600.280, 104 Positions, 600 mm S[spindles Gauge, Spindle speed 2000 to 10,000 rpm, Delivery speed 30 to 350 meter per min, Take up Traverse 10 inches, Tube take up with random traverse, Max package diameter 350mm, Max full package weight 17kg, Supply Package 280mm diameter
Traverse 10 inches, Supply Package weight 12kg, S or Z twist directions, Twist Range 12 to 666 TpM, Count Ranges, (1) machine Disc 162mm : 235 to 3300 Dtex, (1) machine Disc 120mm : 940 to 6600 Dtex.
AA03/150824E/AA-R/F/
Elitex (lizense Volkmann) Two for One Twisters VTS-07-3
Quantity: 2, Year: 1990, Type VTS-07-3, General overhault in 2008, 132 spindles, 6” traverse, pot diameter 185 mm, Feeding: assembling bobbins 6-7”, tubes length until 205 mm, diameter until 175 mm, Delivery: conical and cylindrical tubes, length 170mm, 6” traverse, diameter until 350 mm, 2-3 kg, Automatic stop by yarn break, spindle speed 2.600-5.500 tpm, airthreading like Volcojet, Still running, good condition, motor 30kW, 380V3Ph/50HZ.
AA03/150824E/T-R/F/
Volkmann Two for One Sample Twister VTS-08
Quantity: 1, Year: 1984, Type VTS-08, Model 4.11, 12 spindles, pitch 205 mm, pot-ø 157 mm, feeding: assembling cones 6-7“, Delivery: 6“ con. tubes 4°20 or cylindric, diameter 280 mm max weight 3.200 gr. Volcojet-air threading, yarnbreak-control, automatic Lift of cones, by yarnbreak, Speed 12.000 tpm, very good condition, still in running position, 380V, 3 Ph/50 HZ.
AA62/310724/BK/
Volkmann 2×1 Twister VTS-05-C
Quantity: 1, Year: 1997, mod.VTS-05-c, Pot Diameter: 29cm, 120 spindles
AA62/310724/BK/
Volkmann 2×1 Twister VTS-05-C
Quantity: 1, Year: 2000, mod.VTS-05-c, Pot Diameter: 29cm, 120 spindles
AH68/230724/BY/
Saurer Volkmann Compact two-for-one Twister
Quantity: 2, Year: 2016, TYPE 09 – CONSTRUCTION TYPE 8.11, 220 SPINDELN each machine, PITCH 205 mm, POT 145 mm, POT 170 mm, DELIVERY PACKAGE 150 mm – 4 deg 20
ADAPTERS for cylindrical DYE PACKAGE are available, WAXING, SOHLER OVERHEAD CLEANER.
AE56/200724/
Saurer Twisting VTS-10
Quantity: 1, Year: 2010, Model VTS-10, Oerlikon (TFO), Original China, 220 Spindle/drum, drum inner diameter 137mm.
AC86/010724/
RATTI TWISTING MACHINES
Year’s 90, NUMBER 60 POSITION MORE 12 POSITIONS SPARE PARTS.
INVERTER – POT DIAMETER 265mm – FINAL BOBIN 280mm – RUNNING CONDICTION
AB15/260624E/AS-Y/F/AX/
Galan Twistec
Quantity: 1, Year: 2001, Type: TWK 250/4, 40 spindles. Ring diameter 200mm x 25.4. Power: 30 kw, Voltage 380 v – 415 v.
Machine Brand is Galan, (but the previous Spain Co Twistec).Its a high quality machine
Dimensions of bobbins : their bobbins are double flange height 400mm flanges of 18mm
Bobbin weight when full of yarn : depends on material
maximum spindle speed : 6.000rpm
spindle driven :Transmission belt
stop spindle : – Resistances
Type of ring traveller – Porous ring D.200 25,4mm
The creels are different on each side, but can be the same.
AC06/300524/
Barmag Twister DD23
Quantity: 3, Year: 2×2001-1×1999, 2 x 48 spindels / machine, Max 9500 RPM, Dtex range : 850 – 3300, Z or S Twist, TPM : 40 – 150, Polyester HT- yarn, Weight of bobines : 14 kg, Inside diameter of tube : 110 mm, Length of tube : 300 mm, Pot diameter : 360 mm, Height of pot : 320 mm
AA10/220524E/LY-Y/M/
Roblon Twisters
Quantity: 2, Year: 2015, For rope, twine, etc. Type T 300, With their respective creels, CAPSTAN option, suitable for 35 to 125,000 dtex.
AA10/170524/
Ratti 2×1 Twisters
Quantity: 3, Year: 1999, Type R325N/144/12 NT180, 84 positions each, Can dia. 180 mm.
AA10/170524E/AO-C/M/
ICBT Carpet Cabler
Quantity: 1, Year +/- 1990, 2 x 48 spindles
Can diameter 290 mm, height 270 mm, Feeding and output in 10″
AA10/170524E/CA-R/M/
ICBT Carpet Cabler
Quantity: 1 , Year: +/- 1993
Electrical cabinet a little more recent, 2 x 48 spindles, Can diameter 290 mm, height 270 mm
Feeding and output in 10″
AA05/050624E/ATP.L-AI/F/
Volkmann VTS 09
Quantity: 4, Year: 2007, 2008, 300 Spindle, Pot Dia in mm 142, Traverse in Inch 6, Spindle Pitch in mm 195, Delivery Package Cone, Conicity 4°20′, Splicer Not Available, Pneumatic Threading Available, Package Lifting Mechanical, Motor kW 30, OHTC : 8x available, Spindle Drive Tangential.
AE11/230424/
Volkmann VTS-090S (FT) Two-for-One Twisting
QUANTITY: 12 , YEAR: 2012-2013, 192 SPINDLES/SET, POT DIA. 145MM, POT HEIGHT: 152MM, TRAVERSE: 6”, FEED PACKAGE: CONE 4’20, TAKE UP PACKAGE: 280MM, OVER HEAD TRAVELLING CLEANER.
AE56/200424/
Saurer VTS-10 Twisting
Quantity: 1, Year: 2017, Spindle 240, Barrel Dia 137 mm,gear case, Pneumatic lifting, length about 30 meters.
AC29/020424E/ACL-AI/F/AS/
Volkmann VTS05-C Cabling
Quantity: 1, Year 2011, 160 spindles , Diameter 285 mm.