AA10/170425E/RP.L-R.L/M/
Lezzeni Assembly Twister
Quantity: 1, Year: 2003, mod.BRH-240, 40 spindles (20×2 sides), 3 ends, gauge 240 mm., ring dia.115 mm., with flanged bobbin run 260 mm., flange dia.82 mm, friction drive, upper creel. Available also extra ring dia.178 mm
AC94/150425/
Saurer Allma Cable Twisters
Quantity: 7
4x Type CC3 – 160 positions ea. – 2007 year
3x Type CC3 – 120 positions ea. – 2005 year
Status: In Operation
AA08/010425/
Volkmann Double (2×1) Twisting VTS 06-0 Bauart 5.62
Quantity: 1, Year: 1998, n.144 spindles, gauge 445 mm, feeding 10″ (250 mm) by assembly winder, h.tube 290 mm – diam. int.68 mm
basket internal diameter 230 mm, free balloon, exit 8″ (200 mm), tube length 225 mm – base internal diam.68 mm – tip internal diam.33 mm, pneumatic threading, cylinder with rubber band
dual control torsion adjustment, single control spindle speed adjustment, take-up package, yarn reserve, soft cones device, 3-pin cones holder, cones unloading belt
AA08/010425/
Savio Double (2×1) Twisting Geminis 302 CF
Quantity: 2, Year: 1999, n.224 spindles each, free balloon, dual control
feeding 8” (200 mm) from assembly winder diam. bobbin 185 mm
gauge 300 mm – 4 spindles per module, basket diameter 200 mm, exit 6” (152 mm) – conicity 4°20’, cylinder with rubber band
take-up package, pneumatic threading, yarn reserve – soft cones device – pin creel
inverter for spindle speed regulation, Mesdan Splicer system mod. ATS 115 – n.2 apparatus per side, Magitex blower with dust discharge at the main unit
AA08/010425/
Savio Double (2×1) Twisting Geminis 242 BF
Quantity: 2, Year: 2000, n.300 spindles each, free balloon, dual control
feeding 8” (200 mm) from assembly winder diam.bobbin 160 mm, gauge 240 mm – 5 spindles per module, basket diameter 180 m,
exit 6” (152 mm) – conicity 4°20’
cylinder with rubber band, take-up package, pneumatic threading, yarn reserve – soft cones device – pin creel, inverter for spindle speed regulation
Mesdan Splicer system mod. ATS 115 – n.2 apparatus per side, Magitex blower with dust discharge at the main unit
AF12/240225E/YC-R/M/AX/
Barmag TFO Twister
Quantity: 3, Year: 1991/1993/1996, No. of spindles: 72 (Double sided), Type: DD23, Traverse: 10 inch (25.4 cm), Output tube: 11 inch (29cm)
AH54/240225E/LA-P/M/DU/
Volkmann/Saurer Twisting 05
Quantity: 3, Year: 2003, spindles: 120, Capacity in ton @ 2000 dtex and 85 tpm: 3.3
2 big motors with 42 kw each
All machines are in running condition and well-maintained
AA10/200225/
ICBT Two-for-One Twister
Quantity: 1, Year: 1995, Type DT510, 72 spindles, Feeding: 10“, can diameter 330 mm, delivery: 10“.
AI30/210225E/AA-R/M/AQ/
Volkmann Twisting VTS 06S
Quantity: 1, Year: approximately of the 90s, 40 spindles, Spindle enter 10” (290 mm), cestello Ø int. mm 230, take up 10 ‘’ (290 mm), conicity 420°, single control with inverter. Running.
AA10/170425E/TI.L-L.L/M/
Lezzeni Assembly Twister
Quantity: 1, Year: 2004, model BRH-240 , 100 spindles (50×2 sides), 3 ends, gauge 240 mm, ring dia.115 mm., for flanged bobbin run 260 mm., flange dia.82 mm., friction drive, upper creel. Available also extra ring dia.178 mm
AA10/200225E/O-C/M/
ICBT 2 x 1 Twisters
Quantity: 10, Year +/- 1997, Type DT360, 128 positions, Can dia. 140 mm
AA10/070225/
AGTEKS Twister
Quantity: 1, Year: 2007, for samples DirectTwist-2B , delivery 2 bobines 6″, 4°20
AH68/040225/BY/
GALAN FANCY YARN TWISTER
Quantity: 1, Year: 1994, TYPE MINI PR-F/3 MP, 6 positions – ring-dia 120 mm tube adjustable
Up to 500 mm – fully electronic control –, Electronic programmer GTG-S-6
AB64/300125/
Volkmann VTS05-0-C Cabling
Quantity: 5, Year: 2007, 120 Spindles each, Type: 8:00, Volkmann Cabling (machines are cabling only and dont have devices for twisting), Diameter pot: 295, H: 300.
AF74/090125/
Muratec TFO Twistings & SSM Doubler
6x Muratec TFO Twisting, Type 368 – II
Year 1998, 144 spindles, Take up: 6” 4.20, Pot size: Ø 160 mm x h 155 mm.
Note: 1 machine has some missing parts
3x Muratec TFO, Type 368 – II
Year 1998, 144 spindles, Take up: 6” 4.20, Pot size: Ø 185 mm x h 245 mm.
4x Muratec TFO, Type 373 – II
Year 1998, 112 spindles, 8” traverse, Pot size: Ø 185 mm x h 245 mm.
1x SSM Doubler, Type PSF-52-53
Year 1998, 48 positions, No of ply: 24 with 3 ply, 24 with 5 ply, Travers: Adjustable tube size from 5” to 11”, Winding type: Precision, Waxing device for synthetics, Ready for OHTC, 400V, 50 Hz.
1x SSM Doubler
Year around 1995 (no name Plate), 48 positions, Travers: 8”, Winding type: Drum, No of ply: 2, 1 inverter for 8 spindles, OHTC.
AC29/131224/AS/
Complete BCF Line with Cabling & Heat Setting
1x Neumag S plus BCF line
Year: 2012, Mono PP and polyamid, 3 extruders, 6 winders, 15 tons per days.
3x Volkmann Cabling
Year: 2012, 176 spindles each.
1x Superba Heatset TVP3
60 spindles, 7 tons per day.
AA05/131224D/CR.L-R/F/CL/
Volkmann TFO VTS07
Quantity: 3, Year: 1999, feeding 2×6″ duo-pot, 176 positions each, delivery 6″, conicity 5°57′
AA03/041224E/S-R/F/
Assembling Twister Hamel
Quantity: 1, Year: 1996 , Type H1020, 2 x 8 = 16 spindles, ring-diam. 145 mm,
with 3 flange-bobbins each spindle, diam. 130 mm,
high 280 mm between flanges, weight depends of material until 2,-kg,
1 motor each spindle, with inverter, meter-counter,
creel on the machine, good condition,380V/50HZ,
still in running position.
AG33/021224/
Saurer Allma Cablecorder Twister
Quantity: 1, Year: 1998, 64 positions, 290mm pot, ~10″ traverse takeup, 2 position overhead creel, center doffing conveyor.
AH54/021224/DU/
Power Heatset & Volkmann/Saurer “”Twisting & Cabling 05-0-C””
Power Heatset
Quantity : 3
Year: 2005,2006,2010
Type: GKK 5000
Head Number: 48
Capacity in ton @ 2000 dtex and 85 tpm: 5.2
All machines are in running condition and well-maintained.
All these heat set lines are in excellent condition, excellent Gillbos winders with separate reserve accumulators for each end/position which give you the flexibility to run, and also great quality of PA6 heat set yarn. You know very well if PA6 yarn keeps/stays longer (unequal times in the oven under high temperatures, during doffing etc..) will create big issues in bulk, crimp, and printing of this yarn and it will create “lines” on the carpet design after printing… with this kind accumulators on the winder that risk is minimized.
Also, with accumulators on the Gillbos winder, there is no drop off production output during doffing time… yarn continuously passing the oven and accumulates during each doffing time etc…
Heat set yarn from Power Heat Set lines are always more bulky than heat set yarn from Superba, better carpet coverage etc…
Volkmann/Saurer “”Twisting 05″”
Quantity: 3
Year: 2003
spindles: 120
Capacity in ton @ 2000 dtex and 85 tpm: 3.3
2 big motors with 42 kw each
All machines are in running condition and well-maintained
Volkmann/Saurer “”Twisting & Cabling 05-0-C””
Quantity: 17
Year: 3×2003-12×2006-2×2005
spindles: 120
Capacity in ton @ 2000 dtex and 85 tpm: 3.3
Machines Year 3×2003- 4×2006: 2 big motors with 42 kw each
Machines Year 2×2005- 8×2006: 2 big motors with 52 kw each
All machines are in running condition and well-maintained
AH54/021224/DU/
Volkmann/Saurer “”Twisting & Cabling 05-0-C””
Quantity: 17, Year: 3×2003-12×2006-2×2005, spindles: 120
Capacity in ton @ 2000 dtex and 85 tpm: 3.3
Machines Year 3×2003- 4×2006: 2 big motors with 42 kw each
Machines Year 2×2005- 8×2006: 2 big motors with 52 kw each
All machines are in running condition and well-maintained
AD79/261124/BH/
Volkmann FT (Fusion Twister) VTS09 HE
Quantity: 4 , Year 2011, 240 spindles, Pot Dia 146mm, Spindle Gauge 198mm,
with Balloon control, 12 section machines,
Spindles speed 13,500~27000RPM,
Height 1362mm x Width 600mm x Length 28509mm,
AA05/211124/BT/
Savio Geminis Twisting
Quantity: 8, Year: 1998/2005, mod. 202.A
4 mcs 288 heads each (1998/9)/ 4 mchs 336 heads each ( 2005), Electronic head Twistronic, Dualdriver, Feeding 8” coupled diam. Max.140 mm. Pneumatic threading, Second overfeed roller, Yarn reserve, Exit 6” 4°20’, Drum with a rubber, Travelling blower Magitex, 380V 50Hz.
AD65/201124D/RO-O/M/
Geminis S Twistings
Quantity: 10, Year: 2002, 208 head, 6 inch feed and delivery, 17.5 cm pot dia. Traveller blower.
AA10/201124E/OL-L/M/
Savio 2×1 Twisters & Fadis Assembly winder
Savio 2×1 Twisters
Quantity: 2, Year: 1998, mod.GEMINIS 242B , 120 spindles (60×2), feeding 8″ cylindrical, flyer, delivery 6″, 4°20, air threading device, blower, without Inverter.
Fadis Assembly winder
Quantity: 1, Year: 1997, mod.FA , 12 heads, delivery 8″ cylindrical, 3 ends, external creel.
AI30/121124/
Ratti Twisting Machine for Polyester
96 spindles, Feeding: 225mm , Exit: tube of 230 d.56 , inner pot: 225mm, running
AD65/081124D/AO.L-Y/F/AS/
Volkmann VTS 09–S-0 Twistings
Quantity: 16, Year: 1995, 160 head, 14.5 cm pot dia, 6 inch feed and delivery.Compact model, Fee balon, 30 kw
AA10/041124/
Savio Twisters & SSM Assembly Winder
AA10/041124E/TA-T/M/
3 SAVIO 2x1 Twisters of which:
(2) mod. TDS-15N yoc 1984, each 240 spindles (120x2)
(1) mod. TDS-15N yoc 1991, 200 spindles (100x2), Inverter, splicer Mesdan,
Feeding 160 mm., Pneumatic air threading device, delivery 6”, 4°20, bobbin lifter, yarn reserve.
AA10/231024E/AA-R/M/
CIMI Vacuum Steamer mod.VAPORFIX VCA/A
Year: 1999, atm, temp. 98°C., dia.1500 mm. x 3000 mm., 2 trolleys, capacity 200 kgs.-max 400 kgs., gas oil boiler.
Please note that SSM Assembly winder is under option but machine is not complete only 15 heads are running
AC29/301024E/ALY-AY/F/AS/
Volkmann VTS05-C Twisting and Cabling
Quantity: 2, Year: 2017, 170 Spindles.
AC29/151024/AS/
Neumag S Plus BCF Line & Volkmann Cabling & Superba Heatset
AC29/151024E/ASLI/M/AS/
1X Neumag S Plus, BCF line:
Year: 2017
""Mono Color & Tri Color""
Polyester and polypropylene
6 extruders
6 winders
6 dosing
It is a high quality machine.
15 tons
NOTE: Machine has 6 extruders, each has 2.5 tons capacity at 2000 dtex
Therefore production capacity can be adjusted depending on the use of one to six extruders.
AC29/151024E/ATI/M/AS/
3x Volkmann Cabling:
Year: 2017
176 spindles.
AC29/151024E/YPI/M/AS/
1x Superba Heatset:
Type: TVP3
Year: 2017
72 spindles.
Capacity of neumag is 15 tons
Capacity of cabling 10 tons
Capacity of heatset 7.5 tons
Usually factories dont heatset or twist al the yarns that is produced by the Extrusion Lines. If needed later we can give you more Volkmanns. Finding Volkmanns is not hard.
We can do dismantling and loading and packing with good boxes.
Dismantling and loading and good packing like new. 100.000 Eur.
Duration of the works approx 5 weeks.
Crane and forklift is included.
Installation and start up 110.000 Eur.
Duration of the works approx 9 weeks.
For installation and start up, crane and forklift and hotels and flights and foods are not included and are on purchaser's account For installation we will send 4 to 5 technicians and host factory should provide 6 workers to help them.
AC29/151024/AS/
Neumag S Plus BCF Line & Volkmann Cabling & Superba Heatset
AC29/151024E/ATLI/M/AS/
1X Neumag S Plus, BCF line:
Year: 2018
Mono Color
Polyester and polypropylene
3 extruders
6 winders
15 tons
NOTE: Machine has 3 extruders, each has 5 tons capacity at 2000 dtex
Therefore production capacity can be adjusted depending on the use of one extruder or 2 or 3 extruders.
AC29/151024E/ATI/M/AS/
3x Volkmann Cabling:
Year: 2017
176 spindles.
AC29/151024E/YPI/M/AS/
1x Superba Heatset:
Type: TVP3
Year: 2017
72 spindles.
Capacity of neumag is 15 tons
Capacity of cabling 10 tons
Capacity of heatset 7.5 tons
Usually factories dont heatset or twist al the yarns that is produced by the Extrusion Lines. If needed later we can give you more Volkmanns. Finding Volkmanns is not hard.
We can do dismantling and loading and packing with good boxes.
Dismantling and loading and good packing like new. 100.000 Eur.
Duration of the works approx 5 weeks.
Crane and forklift is included.
Installation and start up 110.000 Eur.
Duration of the works approx 9 weeks.
For installation and start up, crane and forklift and hotels and flights and foods are not included and are on purchaser's account For installation we will send 4 to 5 technicians and host factory should provide 6 workers to help them.
AC29/101024/AS/
Superba Space Dyeing & Volkmann Cabling
1x Superba, Year: 2017, 72 spindles.
3 or 4 Cabling Volkmann, Year: 2017, 176 spindles.
AB46/011024/AR/
Volkmann VTS – 05C Cabler/Twister
Quantity: 1, Year: 1986, Type 4, 120 spindles, 10” traverse cone, 10” feed package, air threading.
AB46/011024/AR/
Volkmann VTS – 05 Twister
Quantity: 1, Year: 1986, Type 4, 120 spindles, 10” traverse cone, 10” feed package, air threading.