AA03/260426/BY/
Schlumberger ERA Combers, “SUPER HIGH QUALITY”
Feeding of all: 24 slivers, 12 cans
Delivery of all: 1 silver in Can 1.000×1.200mm
all Staedler+Uhl combs
all: 2004
=====
NOTE: 2 OF THESE SOLD, 2 AVAILABLE
=====
NSC Comb 1 Type: ERA40
NSC Comb 2 Type: ERA40
NSC Comb 3 Type: ERA40
NSC Comb 4 Type: ERA40
AA03/260426/BY/
NSC Comb: ERA40, Gill Boxes: GC30, Finisher: FMV32, FMV30, “”HIGH QUALITY IN EUROPE FACTORY””
=====
Feeding of all: 24 slivers, 12 cans
Delivery of all: 1 silver in Can 1.000×1.200mm
all with: Staedler+Uhl combs
all made in: 2004
NOTE: 2 OF THESE SOLD, 2 AVAILABLE
NSC Comb 1 Type: ERA40
NSC Comb 2 Type: ERA40
NSC Comb 3 Type: ERA40
NSC Comb 4 Type: ERA40
=====
all with: Staedler+Uhl combs
Feeding of all: 24 slivers, 12 cans
Delivery of all: 1 sliver in Can 800×1.200mm
all made in: 1999
NSC Comb 1 Type: PB32 “”SOLD””
NSC Comb 2 Type: PB32 “”SOLD””
NSC Comb 3 Type: PB32 “”SOLD””
NSC Comb 4 Type: PB32 “”SOLD””
=====
Gillbox with unroll feeding of bobbins, GC13-D2, 1988, Feeding:2×8 boobins/cans, delivery: 1 sliver, delivery: bobbin, auto bobbin change “”SOLD””
=====
Gillbox special oiling station NSCGC 30 Typ 604, 2004,Feeding:2×4 cans, delivery: 1 sliver, delivery: CAN 800×1.000mm, auto can change. Machine has no autoleveler.
=====
NSC Finisher, FMV 32, 1988, Feeding: 16 cans, 32 slivers, delivery silver: 16×2, tubes 300mm, auto bobbin change “”SOLD””
NSC Finisher, FMV 32, 1988, Feeding: 16 cans, 32 slivers, delivery silver: 16×2, tubes 300mm, auto bobbin change
=====
NSC Finisher, FMV 30,1985, Feeding: 16 cans, 32 slivers, delivery silver: 16×2, tubes 300mm, auto bobbin change
=====
AB15/220426/AX/
Yarn Spinning Line Synthetic & Wool in Europe
SEE DETAILS ON EXCEL SHEET ON THE LINK
NSC GC12 – RL5 Re-Breaker / blender 1 x 1 delivery Auto can doff 1000×1200 – 32 end ball creel
NSC GC13 1989 Auto leveller 1 x 1 delivery Auto can doff 1000×1200 – 8 end creel (2×4) OR St Elois bump press with new (2016) Valven knotter
=========
DRAWING ACRYLIC OR WOOL
Cognetex SCE11/VA 1992 approx’ Auto leveller 1 x 1 delivery Auto can doff 800×1200 – 12 end creel (2×6)
Cognetex SCE420/22V 1992 approx’ 2nd Passage 1 x 1 delivery Auto can doff 800×1200 – 10 end creel (2×5)
Cognetex SCE/420/24V 1992 approx’ 3rd Passage 2 x 4 delivery Auto can doff 800×1200 – 16 end creel (2×8)
NSC FMV32 1990 approx Finisher 20 Spindles Modified doffing trays to rear
=========
DRAWING FOR WOOL
NSC GN4 1970’s Comb gill 2 x 2 delivery Manual can doff 400×1000 – 8 end creel (2×4)
Cognetex SC11V 1989 Post comb gill 1 x 1 delivery Auto can doff 600×1200 – 8 end creel (2×4) – NOT AN A/L
Cognetex SC11VA 1989 Auto leveller 1 x 1 delivery Auto can doff 600×1200 – 8 end creel (2×4)
Cognetex SC11VA 1990 3rd Passage auto leveller 1 x 1 delivery Auto can doff 600×1200 – 8 end creel (2×4)
Cognetex SC11V 1990 4th Passage 1 x 1 delivery Auto can doff 700×1000 – 8 end creel (2×4)
NSC FMV32 1992 Roving Finisher 12 Spindles
=========
DRAWING FOR WOOL
NSC GN5 1970’s Nylon pre-mix 1 x 1 delivery Manual can doff 600×900 -12 end creel (2×6)
Sant Andrea CSN 1998 Pre-Mix 1 x 1 delivery Auto can doff 800×1000 – 8 end creel (2×4) Modernised PLC & Touchscreen (Mitsubishi) 2023
Sant Andrea CSN 1990 1st Passage 1 x 1 delivery Auto can doff 800×1200 – 12 end creel (2×6)
Sant Andrea CSN – ARM 1990 Auto leveller 1 x 1 delivery Auto can doff 800×1200 – 10 end creel (2×5)
Sant Andrea SH22 1990 3rd Passage 2 x 2 delivery Auto can doff 800×1200 – 10 end creel (2×5) pin roller gill
NSC FMV 32 1995 Roving Finisher 20 Spindles
=========
DRAWING FOR WOOL
NSC GN5 1970’s Sampler 1 x 1 delivery Manual can doff 700×900 -8 end creel (2×4)
=========
SPINNING
Gaudino FPB 99 / 260 / La 1999 Ring spinning 704 Spindles – Auto doffing – SKF PK 1601 draft – 82.5mm Pitch – 55mm ring diameter – 260mm tube length -SKF silent spindle – spinning finger – Magitex blower – double drive
Gaudino FPB 99 / 260 / La 1999 Ring spinning 640 Spindles – Auto doffing – SKF PK 1601 draft – 90mm Pitch – 60mm ring diameter – 260mm tube length – spinning finger – Magitex blower – double drive
Gaudino FPT 260 1998 Ring spinning 640 Spindles – Auto doffing – SKF PK 1601 draft – 90mm Pitch – 60mm ring diameter – 260mm tube length – spinning finger – Magitex blower – single drive
Zinser 319L 1985 Ring spinning 516 Spindles – CoWeMat auto doffing – SKF PK 1601 draft – 90mm Pitch – 65mm ring diameter – 280mm tube length – Magitex blower – New Mitsubishi Inverter drive (2018) – single tangential drive
Zinser 319L 1985 Ring spinning 516 Spindles – CoWeMat auto doffing – SKF PK 1601 draft – 90mm Pitch – 65mm ring diameter – 280mm tube length – Magitex blower – New Mitsubishi Inverter drive (2018) – single tangential drive
Zinser 319L 1989 Ring spinning 516 Spindles – CoWeMat auto doffing – SKF PK 1601 draft – 90mm Pitch – 65mm ring diameter – 280mm tube length – Magitex blower – New Mitsubishi Inverter drive (2018) – single tangential drive
Zinser 319L 1989 Ring spinning 516 Spindles – CoWeMat auto doffing – SKF PK 1601 draft – 90mm Pitch – 65mm ring diameter – 280mm tube length – Magitex blower – New Mitsubishi Inverter drive (2018) – single tangential drive
Zinser 319L 1989 Ring spinning 516 Spindles – CoWeMat auto doffing – SKF PK 1601 draft – 90mm Pitch – 65mm ring diameter – 280mm tube length – Magitex blower – New Mitsubishi Inverter drive (2018) – single tangential drive
Sant Andrea FE288 1974 Ring spinning 288 Spindles – Manual Doff – SKF PK 1601 draft – 82.5mm Pitch – 55mm ring diameter – 260mm tube length – Twin drive 144 spindles per side tangential drive – New Mitsubishi Inverter drive
Sant Andrea FE288 1974 Ring spinning 288 Spindles – SKF PK 1601 draft – 82.5mm Pitch – 55mm ring diameter – 260mm tube length – Twin drive 144 spindles per side tangential drive – New Mitsubishi Inverter drives – Manual doff – compact system retrofitted approx’ 2014
==========
WINDING/AUTOCONER
Savio ECO PULSAR L 2020 Cone Winder 1 80 Spindles
Savio ECO PULSAR L 2020 Cone Winder 2 64 Spindles
Savio ECO PULSAR L 2020 Cone Winder 3 74 Spindles includes 10 sp cone to cone
Wm Arnold 1970’s Autoclave Vacuum only Volume 3.15m³ (ø=1.35m x 2.2m long) – Ecapsulated insulation – Modern control panel with Mitsubishi inverter & touchscreen (2020)
==========
AEEMBLY WINDER
Fadis Sincro B 510 Premium 2023 Assembly winder “a) Drive end prepared for extension up to 75 spds
* Touch Screen coloured computer for programmes creation / modification / memorization,
* Remote control with Fadis / Industry 4.0.
* Connecting kit for 25 + 25 spds machine as per enclosed layout .
b) Spindle : 50 individual spindles with individual set up / programming per each spindle
* Take up : 10″” cylindrical tube on all 50 spds
* Bobbin brake stoppage system in case of yarn breakage
* Tensioning system : 1 Tens Control-Online automatic tensioning system for each spindle , ceramic disc type
* Automatic doffing with movable cutter and long slide deposit for 2 full packages having 265 mm dia
c) 40 spds with separate creel for 3 plies + 3 tail end x 320 mm feed packages max dia
10 spds with separate creel for 4 plies + 4 tail end x 280 mm feed packages max dia
* with 2 bale roller for yarn coming from separate creel – no ceramic separator – only rotating godet
* with slight separation between spd 20 and 21 of 320 mm to be able accomodate all bobbins
d) Nr 2 Mesdan ats rail with 1 Air splicer
e) Nr 2 Magitex blower/ sucker
* 5 spds per section , single sided”
=============
TWISTING
Volkmann VTS 05 1990 2 for 1 twisting 120 spls, 10″ input 10″ output, double drive
Volkmann VTS 050 1999 2 for 1 twisting 88 spls with or without balloon limiter, 10″ input 10″ output, double drive
Savio Geminis 244c 1999 2 for 1 twisting 180 spindles, Magitex blower, Mesdan air track splicers – Basket ø 185mm
Savio Geminis 244c 1999 2 for 1 twisting 180 spindles, Magitex blower, Mesdan air track splicers – Basket ø 185mm
Savio Geminis 244c 2000 2 for 1 twisting 180 spindles, Magitex blower, Mesdan air track splicers – Basket ø 185mm
Savio Geminis 244c 1999 2 for 1 twisting 200 spindles, Magitex blower, Mesdan air track splicers – Basket ø 185mm
Savio TDS15N 1993 2 for 1 twisting 220 spindles, Magitex blower, Mesdan air track splicers – Basket ø 165mm
Savio TDS15N 1993 2 for 1 twisting 220 spindles, Magitex blower, Mesdan air track splicers – Basket ø 165mm
=========
BALLING
C&L HG1000 2022 STEAMER 10 track Thread laying heads, Steam connection, Thread break sensor, Single drive support belts, Lint drawer, Multi-threaded overlay, Control cabinet with touch screen control panel, Water level switch, Single drive support heads
C&L HG1000 2022 STEAMER 10 track Thread laying heads, Steam connection, Thread break sensor, Single drive support belts, Lint drawer, Multi-threaded overlay, Control cabinet with touch screen control panel, Water level switch, Single drive support heads
C&L KAB2000 2022 BALLING MACHINE 20 spindles Discharge conveyor for packaging, Automatic banding process, Banderol flap, Banderol control, Cup conveyor with grippers, Assembly of banding unit, Place banderol out of magazine, Banderol magazine, Automatic scissors at the winding end, Flyer adjustment, Servo motor mandrel drive, View of winding process
C&L VP100 2022 CONVEYOR Doffing from balling machine, Balls presented to ball packer in rows
C&L PB200 2022 PACKAGING DEVICE “Equipped with barcode printing system and automatic application device for self-adhesive labels
onto the bottom of the plastic bags.
– ball weight from approx. 25 – 100 g (subject
to trials)
– ball packaging of 1 or 2 rows of balls in one level
– max. output of approx. 6 bags per minute
Operation touch screen panel with PLC control
Doffing from balling machine
Bag magazine”
C&L HG1000 2023 STEAMER 10 track Thread laying heads, Steam connection, Thread break sensor, Single drive support belts, Lint drawer, Multi-threaded overlay, Control cabinet with touch screen control panel, Water level switch, Single drive support heads
C&L HG1000 2023 STEAMER 10 track Thread laying heads, Steam connection, Thread break sensor, Single drive support belts, Lint drawer, Multi-threaded overlay, Control cabinet with touch screen control panel, Water level switch, Single drive support heads
C&L KAB2000 2023 BALLING MACHINE 20 spindles Discharge conveyor for packaging, Automatic banding process, Banderol flap, Banderol control, Cup conveyor with grippers, Assembly of banding unit, Place banderol out of magazine, Banderol magazine, Automatic scissors at the winding end, Flyer adjustment, Servo motor mandrel drive, View of winding process
C&L VP100 2023 CONVEYOR Doffing from balling machine, Balls presented to ball packer in rows
C&L PB200 2023 PACKAGING DEVICE “Equipped with barcode printing system and automatic application device for self-adhesive labels
onto the bottom of the plastic bags.
– ball weight from approx. 25 – 100 g (subject
to trials)
– ball packaging of 1 or 2 rows of balls in one level
– max. output of approx. 6 bags per minute
Operation touch screen panel with PLC control
Doffing from balling machine
Bag magazine”
Jumbo balling machine
C&L HG800 2023 STEAMER 8 track Thread laying heads, Steam connection, Thread break sensor, Single drive support belts, Lint drawer, Multi-threaded overlay, Control cabinet with touch screen control panel, Water level switch, Single drive support heads
C&L KG80 2023 BALLING MACHINE 8 spindles large ball (400gm), Touch-Panel, Automatic scissors at the winding end, Flyer adjustment, Servo motor mandrel drive, Safety light barrier mandrel drive
Band forming machines
C&L ED1000 2022 BANDING MACHINE “- Paper strips are taken from the paper magazine
– Paper strips are folded
– self-adhesive labels are taken from a roll of pre-printed labels – Paper strip length: 250 – 400 mm
– Paper strip width: 25 – 50 mm or – 75 mm or – 100 mm
– Band length: 95 – 180 mm
– Max. label size: 39 x 36 mm
– Max. output with band width 50 mm:
approx. 2500 bands/h at 100 % efficiency (output depending on band measurement and paper quality)” “INCLUDED WITH
BALLER”
C&L ED1000 2022 BANDING MACHINE “- Paper strips are taken from the paper magazine
– Paper strips are folded
– self-adhesive labels are taken from a roll of pre-printed labels – Paper strip length: 250 – 400 mm
– Paper strip width: 25 – 50 mm or – 75 mm or – 100 mm
– Band length: 95 – 180 mm
– Max. label size: 39 x 36 mm
– Max. output with band width 50 mm:
approx. 2500 bands/h at 100 % efficiency (output depending on band measurement and paper quality)” “INCLUDED WITH
BALLER”
C&L T4 2023 CAN FILLING MACHINE Never used
AJ11/170426/BQ/
NSC PB33 LM & PB32 LM COMBERS
NSC Model PB 32 LM
Quantity: 6, Year : 1x 1996, 5x 1997, Delivery can: 1000 x 1200 mm;
Feed: 24 ends; Can: 700 x 1000 mm, 12 Nos;
comber currently running at the facility
NSC Model PB 33 LM
Quantity: 2,Year : 2001 , Delivery can: 1000 x 1200 mm;
Feed: 24 ends; Can: 700 x 1000 mm, 12 Nos;
comber currently running at the facility
AA98/160426E/RT-C/F/AQ/
Gill Box NSC GN6, FULLY RENEWED
1 Gill Box NSC GN 6 , year 1995 , serial 29222 ,
combs head with screw drive , n. 72 combs , step 9 mm. ,
feeding creel 12 positions by cans ,
delivery 2 slivers in 2 cans ( one sliver each can ) 700 x 1000 mm. ,
upgraded with new control panel and inverter to speed control.
FULLY RENEWED
CAN BE SOLD SEPARATELY
==========
1 Gill Box NSC GN 6 , year 1992 , serial 27942 ,
combs head with screw drive , n. 72 combs , step 9 mm. ,
feeding creel 12 positions by cans ,
delivery 4 slivers in 2 cans 500 x 1000 mm. ( 2 slivers in each 1 can ) ,
upgraded with new control panel and inverter to speed control.
FULLY RENEWED
CAN BE SOLD SEPARATELY
AI08/130426/BA/
GC15 GILL BOXES
Few GC15 group line, year 2004;
1 GC15 gill. year 2003.
ALL GC15 are excellent condition.
AA10/090426E/TY-T/F/
SANT ANDREA Combers, mod. P100 yoc 2005
2 SANT ANDREA Combers mod. P100 yoc 2005, feeding 24 cans/bobbins, delivery 1 can 800×1200 mm, 1 sliver
AA10/090426E/TC-Y/F/
2 SANT ANDREA Combers mod.P100, 2000 & 2002
2 SANT ANDREA Combers mod.P100 yoc (1) 2000 and (1) 2002, feeding 24 cans/bobbins, delivery 1 can 800×1000 mm., 1 sliver.
AA10/080426/
SANT ANDREA Gill box mod.VSN yoc 2007
1 SANT ANDREA Gill box mod.VSN yoc 2007, screws head, feeding 12 (6×2) cans/bobbins, delivery 1 can 700×1000 mm, 1 sliver, autom. change
AA10/080426/
SANT ANDREA Gill box mod.VSN yoc 2005
1 SANT ANDREA Gill box mod.VSN yoc 2005 , screws head, feeding 12 (6×2) cans/bobbins, delivery 1 bobbin, autom. change
AA10/080426/
SANT ANDREA Gill box mod.CSN yoc 2002
1 SANT ANDREA Gill box mod.CSN yoc 2002 about, chain head, feeding cans, delivery 1 can 700×1000 mm, 1 sliver, autom. change
1 SANT ANDREA Gill box mod.CSN yoc 2002 about, with autoleveller, feeding cans/bobbins, delivery 1 bobbin, autom. change
AA10/080426/
Sant Andrea CSN Gill Box
Quantity: 1, Year: 1996, mod.CSN , Chain head, feeding 5×2=10 cans/bobbins, delivery 1 bobbin, autom. change, oiling device.
AB45/060426E/YS.L-Y/F/CV
NSC Schlumberger GILL BOX GC30
Quantity: 1, Year: 2005, exit bobbin , Autoleveller,Bobbin dimension widht 335 to 550 (max 600 mm)
Compresser air: min 4 bars, Sliver weight 18 to 32 Ktex, Speed 600 meters per min, Machine in running condition
AA05/240326D/COI-CI/F/BA
2 x NSC Schlumberger combers mod. ERA
year 2004, ball feeding, can delivery día. 1000×1200 mm.
2 machines require 1×40′ ctr for shipment
AA05/240326D/RO.L-AI/C/BA
8 x Sant’Andrea combers mod. P100, year 2002,
4 x delivery 700 x 1000 mm.
4 x delivery 1000 x 1200 mm.
4 combers fit in 1×40′
AA08/230326/AQ
Intersecting Sant’Andrea CSN
Intersecting Sant’Andrea CSN
chain head
feeding 10 couplings by cans
exit 2×1 can 700 x 1000
automatic doffing
380/3 volts – 50 Hz
year of manufacture 1999 –
AA08/230326/AQ
Intersecting Gaudino mod. CD14 – CD22
Intersecting Gaudino mod. CD14 – CD22
chain head
feeding 12 couplings by cans
exit 2×2 can 800 x 1200
automatic doffing
380/3 volts – 50 Hz
y.o.c. 2018
AA08/230326/AQ
NSC Schlumberger GC15 GILL BOX
Intersecting NSC GC15
– chain head
– feeding 6 couplings by cans
– oiling device on the exit
– exit 1×1 can 700 x 1000
– automatic doffing
– 380/3 volts – 50 Hz
– year of manufacture 2000
– Serial number: 30328
HIGH QUALITY
AB52/030326/
1 Gillbox SANT ANDREA SH24
1 Gillbox SANT ANDREA SH24
Year: 1999, Type SH 24, creel 16 cans; 4 slivers 2 cans 800X1000
AB52/030326/
1 Gillbox COGNETEX SCE 400 11 VA
1 Gillbox COGNETEX SCE 400 11 VA
Year: 1999, type : SCE 400 11 VA; creel 10 cans, electronic autoleveler; Automatic delivery 1 sliver 1 can 700X1000.
AH34/030326/AS
NSC Gill Boxes – GC12-GC13
NSC-Drafting, Gill Box GC 13, Year 1988
SERIAL NO: 26038
Feeding: Can
Delivery: 1 sliver-1 can: 60/1200
NSC-Drafting, Gill Box GC 12, Year 1982
SERIAL NO: 22151
Feeding: Can
Delivery: 2 sliver-2 can: 70/1200
AA03/270226/BY
Combing line D
comb 1 with Staedler+Uhl combs PB32 NSC 1998. 24 slivers, 24bobbins 1 1.000×1.200mm
comb 2 with Staedler+Uhl combs PB32 NSC 1998. 24 slivers, 24bobbins 1 1.000×1.200mm
comb 3 with Staedler+Uhl combs PB32 NSC 1998. 24 slivers, 24bobbins 1 1.000×1.200mm
comb 4 with Staedler+Uhl combs PB32 NSC 1998. 24 slivers, 24bobbins 1 1.000×1.200mm
comb 4 with Staedler+Uhl combs PB32 NSC 1997. 24 slivers, 24bobbins 1 1.000×1.200mm
finisher FMV30 FMV30 NSC 1986. 16 cans each 2 slivers 16×2 tubes 300
AA03/230226E/LY-L/M/CF/
NSC PB32 Combers
Quantity: 4, High Quality Machine.
They have been refurbished and have been in use without any problems for two to three shifts, 20-22 days per month. There are five machines in total, four of which were built in 1998 and one in 1997. They are equipped with PLC.
AA03/230226E/AO-C.L/M/CF/
NSC GC12 Gillbox
Quantity: 1, Year: 1985, Feeding: 10 slivers in cans, delivery: 2 slivers in 1 cans dia 1.000×1200 mm high, With pneumatic press device for higher content in can, automatic can changer, 380V/3Ph/50Hz.
AA03/230226E/CA.L-R/M/CF/
NSC GC12 Gillbox
Quantity: 1, Year: 1985, Feeding: 12 slivers in cans, Delivery: 4 slivers in 4 cans dia 500 x 1200mm high, Automatic can changer with 4 can press for higher quantity each can, 380V/3Ph/50HZ.
AI08/210226D/ARC-O/F/BA/
NSC Schlumberger Era Combers
Quantity: 2, Year: 2004-2006.
the feeding creel is 24 ends bobbin condition, it also can feed by can surely if you want.
the delivery can is 1000*1200mm;
the machine can run if customer inspect.
AB52/180226E/PS-Y/F/BX/
NSC GC15 Blending Gills
Quantity: 1, Year: 1999, Creel 24 bobbins, 2 GC15 heads, 1 reducing head GC15, automatic delivery 700 x 1200.machine has oiling equipment. stopped and still erected.
AB52/180226E/CC-Y/F/BX/
NSC Defelting Gillbox D2-GC12
Quantity: 1, Year: 1985, Creel, 2 x 6 cans, 2 defelting cylinders, automatic bobbin delivery.stopped and still erected.
AB52/100226/AP/
NSC PB33 Woolen Comber
Quantity: 1, Year: 2001, Type LJ, Creel 24 cans, delivery 800 x 1000.
AB52/100226/
NSC GC13 Gillbox
Quantity: 1, Year: 1990, Creel 12 Bobbins, Automatic delivery : 1 sliver / 1 can 800 X 1200 mm; oiling device; 380V/3Ph/50HZ.
AB52/100226/
NSC GC13 Gillbox
Quantity: 1, Year: 1989, Autoleveller, creel 2 x 6 bobbins, bobbin delivery.
AB52/100226/
NSC Gillbox GN6 /GC15 Blending Machine
Quantity: 1, Year: 2001, Mixing GN6 / GC15, Creel 24 bobbins, 2 GN6 heads, 1 reducing head GC15, Automatic delivery 700 x 1200.
AB52/100226/
NSC Gillbox GN5
Quantity: 1, Year: 1978, Autoleveller, creel 2 x 6 bobbins, bobbin delivery.
AB45/040226E/CR-Y/F/AK/
Gill Box Drawing Frame NSC GC 13
Quantity: 1, Year: 1990 , combs head with chain drive ,
feeding creel 08 positions by cans ,delivery 2 slivers in 2 cans 700 x 1100 mm. ,
manual doffing. Delivery:Immediate , Condition: Dismantled
AA08/150126E/TSI-RLI/F/AQ/
Combing PB33, Sant Andrea Blending, Gill Boxes
1x Blending machine Sant’Andrea 2M, Year: 1997 – Output can 700 x 1000
1x Intersecting Sant’Andrea CSN, Year: 1994 – Output can 700 x 1000
5x Combing machines NSC PB33 LJ, Year: 2003-2006 – Output can 800 x 1200
2x Intersecting NSC GC15
1x Intersecting Sant’Andrea CSN
1x Intersecting Sant’Andrea SHE 24, Year: 2011
The machines worked until December 22 Year: 2025
All the relevant cans, finishing tubes, and all spare parts available at the factory will be delivered with the machines.
All the machines are in perfect condition, fully functional, and have always processed 100% wool for weaving sector.
NOTE: FOR SALE AS ONE LOT
AI08/080126/BA/
Line Tow to Tops Breaker for Polyester, Schlumberger NSC
Composed of:
1x TT11 Breaker/Cutter, Year: 1991.
1x GC13 Gill, Year: 1988.
1x GC12 Gill, Year: 1986.
1x GC14 Linked Bump Press, Year: 1992.
Machines are high quality and have not worked full shifts and had less orders during production.
It is very good condition, the machines worked just few days a week.
AD65/301225D/AS-Y/F/
Sant Andrea Gill Box
Quantity: 1, Year: 1990, Model code: RSDN, Used for melange and reduce gram/metre, tops delivery. ( 4 CYLINDER DRAFT IF YOU WANT TO MIX OR REDUCE GRAMMAGE… IF YOU DONT WANT TO MIX OR REDUCE GRAMMAGE, YOU PASS )
AI08/281225/BA
GC14 & GC15 Gill Box
AI08/281225D/LP.L-L/F/
GC14 Gill Box
Gill with ball delivery
AI08/281225D/TR.L-L/F/
GC15 Gill
with ball delivery
AI08/281225D/OT.L-T/F/BA
GC30 Gill Box
Quantity: 2, with ball delivery
year of make 2012, the feeding creel is 2×4=8 ends; with autoleveller;
AA10/161225/
Sant Andrea Worsted Set
Year: 1998, composed of:
1st Gill box mod.ST21 ARE, autoleveller, feeding 5×2=10 cans/bobbins, delivery 1 can 800×1200 mm, 1 sliver, autom. Change oiling device, new drive.
2nd Gill box mod.ST21, feeding 5×2=10 cans, delivery 1 can 800×1200 mm, 2 slivers, autom. change.
AA05/151225/BC/
NSC Bump Press, Blending & Cognetex Gillbox, Breaker,..
1x GN6 + bump press
1x GN6/ET13 blending
2x SMC600 Rebreaker
1x Cognetex /Gill Boxes/Passages preparation line SC400 composed by:
Cognetex 11VA
Cognetex 22V
Cognetex 24V