AI31/041025/
Jakob Muller Needle Looms
AI31/041025D/AA.L-C/F/
2 sets Jakob Muller Needle loom
type NF42 2/66 G Year 2007
with Steel double take down roller for mid-heavy belt
with rubber pressure roller
with 10 harness frame
with 8 repeat chain links
with frequency Inverter
with pick density 3 - 14 pick/cm
with binder thread motion
with warp stop motion device
with re-directional roller
with standard accessories
Condition - Fully refurbished, complete, clean and in good working order.
Note:
( The loom original is NF42 6/27G, we convert it to NF42 2/66 with original Muller parts by Jakob Muller professional technicians )
If you want to weave 12mm -60mm standard plain weave webbing 15 -20 ( convert from inch to cm about 6 to 8 pic/cm ) picks per inch. it should not be a problem at all, because the range of the pick density within 3-14 picks/cm on this loom for mid heavy belt.
If you want to weave the following options of weaving to make some specific tapes(it would be wider in some cases and narrower in some. But mostly they are very thin like plain weave fabric).
the range for NF42 2/66 can weave the tape range from 20 - 64mm tape width. if necessary need to fix the retaining hook i.h + r.h to avoid weft yarn pull back on both selvedge.
OEM spare parts can be supplied or you can direct purchase the spare parts from Muller based on the machine serial number.
Weave: Plain, Harness Frames: 2-6, Reed Width: 120-130 mm, Tension/Rollers: Medium-High warp tension
Weave: Basket 2x2, Harness Frames: 4-6, Reed Width: 120-130 mm, Tension/Rollers: Rubber-coated take-off/rollers for edge control
Weave: Leno, Harness Frames: Optional 2-4, Reed Width: 20-50 mm, Tension/Rollers: Medium tension -Rubber take-off
Weave: Twill 2/2, Harness Frames: 4-6, Reed Width: 20-50 mm, Tension/Rollers: gentle beat up for edge control
Weave: Plain, Harness Frames: 2-6, Reed Width: 120mm, Tension/Rollers: High warp tension
Weave: Twill 2/2, Harness Frames: 4-8, Reed Width: 120mm, Tension/Rollers: Rubber take-off
standard accessories offered along with the machine? Mutran belt, Mutran wheel, spare harness frame ( 2 pcs ), weft needle, weft arm, etc.
Its possible for extra charge to add specific spare parts
Electronic copies (Operational manual and spare parts catalogue) would be given
after sail services such as repair/service/training can be provided but usually not require for cos that already have similar machines because these machines are plug and produce machines with easy maintenance
AI31/041025D/AA.L-C/F/
3 sets Jakob Muller Needle loom
type NF53 4/66 Year 1996
with rubber take down roller or steel Knurled roller ( optional )
with steel pressure roller or rubber pressure roller ( optional )
with 16 harness frame
with 8 repeat chain links
with pick density 3 -40 pick/cm
with binder thread motion
without slow motor
with warp stop motion device
with re-directional roller
with standard accessories
Condition - Fully refurbished, complete, clean and in good working order.
Voltage : 230/400VAC 50hz, 275/480VAC 60hz.
AC86/150825/AQ/
MULLER LOOMS FOR NARROW
QUANTITY: 10, YEAR: 1997/98- 2001/02, TYPE NF 42 , 5 LOOMS 6/27 , 5 LOOMS 8/18 , COMPLETED CREEL , LOOMS PERFECT , RUNNING CONDICTIONS
AB08/270325/
Mageba Narrow Looms
Quantity: 3
2 X Mageba narrow looms FX 111, Year: 1 X 2006, 1 X 2005 , 4/45.
1 X Mageba narrow loom FX, Year: 1997, 4/45.
AC86/141224/
Muller Looms
Quantity: 2, Year: 2016, TYPE NH2-53 6/42 – 4/66 NUMBER, Electronic, Completed creel and Beans, Running Conditions.
AB28/051124/
Muller Needle Ribbon looms
AB28/051124E/CC-C/F/
MULLER type NF53 - 8/27
Quantity: 1 , Year 2006, exit ribbons 8 x 27 mmcapacity 20 heald frames, 6 heald frames installed,
with MÜTRANS weft thread transport,
creel for 8 beams with diameter 400 mm x 370 mm,
take-up with MÜLLER type BWW 8D double side winder (max. diameter 480 mm),
MÜDATA 2 control
AB28/051124E/CC-C/F/
MULLER type NFREQ53 6/50R
Quantity: 1 , year 2000, electr. dobby, exit ribbons 6 x 50 mm, capacity 25 heald frames, 25 heald frames installed,
with MÜTRANS weft thread transport,
creel for 8 beams with diameter 400 mm x 400 mm,
MÜDATA 4 control
AB28/051124E/AT.L-A.L/F/
MULLER type NC 2/175
Quantity: 1 , year 1983, exit ribbons 2 x 175 mm, capacity 14 heald frames, 8 heald frames installed,
2 weft feeders,
creel for 8 beams with diameter 400 mm x 400 mm
AB28/051124E/AR.L-A/F/
MULLER type NFN 42 2/130
Quantity: 1 , year 1988, exit ribbons 2 x 130 mm
capacity 20 heald frames, 6 heald frames installed,
2 weft feeders,
MÜDATA 2 control
AB28/051124E/AC-A/F/
MULLER type NF 42 2/85
Quantity: 1 , year 1987, exit ribbons 2 x 85 mm
capacity 20 heald frames, 4 heald frames installed,
MÜDATA control
AB28/071124E/RR-R/F/
Muller Air Jet label looms
MULLER MUJET1
Quantity: 1, Year: 2002, type MBJL 1/1150
MULLER MUJET 2S
Quantity: 2, Year: 2001, type MBJL 2S 115
AC86/141024/
LOOMS AND WARPER RRIIBBONSECTOR RIBBON SECTOR
BRAND JAKOB MULLER
TYPE:
NF JM2/53 6/42 JACQUART Number 07 looms Year 2008
NF JM2/53 8/27 JACQUART Number 01 looms Year 2007
NFN42 6/27 Year 1998 – NFN42 8/18 Year 1997
NFN42 4/45 Year 1997 – NFN42 2/66 Year 1997
NF42 8/18 Year 1995 – NF42 6/27 Year 1995
NF28 6/27 Year 1990
NF42Z 6/27 Year 1995
NF53 10/18 Year 1998
NF28 2/64 Year 1996 – NF28 4/27 Year 2016
BRAND JAKOB MULLER WARPING
TYPE MW 700N00 YEAR 2004
Creel DERULE’ to 160 or 192 positions
Creel DEFILE’ to 154 – 240 – 232 – 272 positions
BRAND COMEZ LOOMS
Acotronic 400T 10 Bar Fin 15 Year 2003
ComezTronic CT 20/600 Fin 20 Year 2015
ComezTronic CT 16B/600 Fin 20 Year 2004
ComezTronic CT 20/420 Fin 15 Year 2007
ComezTronic CT 8B/400 Fin 20 Year 2002
ComezTronic CT 12B/400 Fin 20 Year 2007
ComezTronic Tr2/400 Fin 20 Year 1995
Comez 408 Fin 20 Year 1994
AE02/020124/
Jacob Muller Narrow Fabric Looms
Quantity: 15
2x NF 53, 4/66, year 1997/99 (can also be modified to 8/27)
2x NF 42, 6/27, year 1997/99 (can also be modified to 2/66 or 4/45)
6x NF 53, 8/27, year 2005 (3) and 2006 (3)
1x NFJM2 53, 6/50, with 192 hooks, year 1999
1x NFJM2 53, 6/42, with 192 hooks, year 1999
2x NFJM2 53, 4/66, with 192 hooks, year 2000
1x NFJM2 53, 8/27, with 192 hooks, year 2000
All looms are cpl overhauled.
AA02/080424E/ALP-AI/M/
Narrow Fabric Needle Looms
Quantity: 17
For Weaving Heavy Gauge Lifting Straps
Comprising of:
7x AMTRAC Needle Looms
Model 4-75, 4 Head, 75mm wide tapes, Year:2019
9x AMTRAC Needle Looms, Model 6-50, 6 Head, 50mm wide tapes, Year:2019
1x AMTRAC Needle Looms
Model 8-30, 8 Head, 30mm wide tapes, Year: 2019
Machines in Warehouse