AB64/220324/
Cobble Tufting
Quantity: 1, Year: 1987. 1/10″ Loop pile megashifter staggered ST88 PANTERA, 4m.
AA91/150324D/CYP-AP/F/AR/
Tuftco 1/10th Gauge Servo Scroll Tufting
Quantity: 1, Year: 2003, 4 Meter, 1/10th gauge Tuftco servo scroll, With 120 servo driven clutch assemblies. Servo cloth feed and servo shifter. Front side yarn feed with tube bank. 12 inch pattern repeat. Currently tufting 144 (365cm). CM3.
Creel, mending frame or rollup is not included.
It has been out of service for 4 years.
Machine has 1,620 tubes/holes so it was designed to make 410cm tufting. Buyer can add needles, loopers and needle plates, they are modular in all the machines and can be added easily by a tufting mechanic. Approx cost to do is USD 2000.
AA91/150324D/CIP-AP/F/AR/
Tuftco Servo Scroll Tufting
Quantity: 1, Year: 2000, 1/10th Gauge , 4 meter, With 120 servo driven clutch assemblies. Servo cloth feed and servo shifter. Front side yarn feed with tube bank. 12 inch pattern repeat. Currently tufting 144 inches. CM1.
Currently Tufting 365cm. Creel, mending frame or rollup is not included. Requires 2×40′ HC.
Machine has 1,620 tubes/holes so it was designed to make 410cm tufting. Buyer can add needles, loopers and needle plates, they are modular in all the machines and can be added easily by a tufting mechanic. Approx cost to do is USD 2000.
AB46/130324/
Tuftco & CMC Sample Tufting
1x Tuftco ELGM 1/10″, Sn: 488531932-8, Servo Drive System Tufting Width: 24”
1x Tuftco 1/10″, Sn: 10450601-S, inline scroll Servo Drive System Tufting Width: 24”
1x Tuftco 5/32″, Sn: 5451098-S, split roll Servo Drive System Tufting Width: 24”
1x CMC 1/10″, Sn: AS-0261087-460, CUT Servo Drive System Tufting Width: 16”
PICTURES ON THE LINK ARE MIXED AND ITS NOT CLEAR WHICH PICTURE BELONGS TO WHICH MACHINE.
AA91/200224D/YA-L/F/AR/
CMC Cut Pile Tufting
Quantity: 1, Year: unknown. (There is no plate. likely mid 1980’s), 4 Meter, 5/32nd Gauge, 5″ rear yarn feed, Currently tufting 12′ 3″, Min pile ht 13/32″. Max 1″, 800 RPMs, Staggered needle bar, Inverter, Creel, mending frame and rollup, 480V / 3Ph / 60Hz.
Its the machine only, that would be loaded into one 40 HC. Creel, mending frame and rollup not included at this price.
AB64/290124D/TO-AC/M/AM/
Cobble ST Tufting
Quantity: 1, Year: 1999
Machine Gauge: 1/10”, Machine Width: 4 Meters
Machine Type: Cut Pile / Double and Sliding Needle Bar
Machine Gauge Parts: All are Modules (Needles, Reed Fingers, Hooks, and Knife Holders)
Machine Pile Height: 5mm to 15mm, Machine Speed: up to 1000 rpm
Yarn Feed: Double side with Servo Motors
Needle bar and Feeding cloth controlled by servo motors.
AB64/170124/
Cobble Tufting
Quantity: 1, Year: 1985. 1/10″ Loop pile jutemover st staggered ST85 RB, 4m.
AB64/170124/
Tuftco Tufting
Quantity: 1, Year: 1989. 1/4″ looppile straight DOUBLE SLIDING NEEDLE BAR, 5m.
AB64/090124E/CY-Y/M/BY/
Modra Tufting Machine for Samples
Year of make higher than 2010, Is perfectly maintained. Machine was in production until June 2023, Can be started up for inspection.
This machine is made to make tuft samples with one or few bobins of yarn. Can do everything. all gauges, cut or loop or cut-loop or scroll or grafic. see website of manufacturer.
https://modra.com/
Machine is not CUT its Only loop, or loop SCROLL or loop graphic