AA22/310325/AQ/
Strahm Through-Air dryer
Quantity: 1 , Year: 2010, Width: 3200mm
Airthrough belt drier consisting of:
feeding transportation belt + four (4) heated process chambers, gas heated, 200 kW/chamber (total 800 kW), max temp: 240 deg. C., outlet transportation belt, complete with cleaning system, cooling table, S-drive with coated driven rolls.
Belt in stainless steel, nozzle gap: 50-300 mm, speed: 15-180 m/min, average production speed: 120 m/min.
AA22/310325E/RO-C/F/AQ/
Fleissner Through-Air Dryer
Quantity: 1, Year: 1998, Type: 8/1414-2500 , Width: 2500mm
8-section perforated drum dryer, drum dia – 1414 mm, direct gas heating, installed heating capacity 1600 kW, drying temperature 120 – 160 deg. C. (220 deg C. possible without PES-sieves), including a CO2 fire extinguishing system.
AA22/310325E/RRA-AT/F/AZ/
Trutzschler Through-Air Dryer
Quantity: 1, Year: 2019, Type: TWD-OD, Width: 3600mm, Omega type dryer, single drum – dia 1895 mm. For spunlace PP, PES and CV nonwovens. Natural gas heated, installed heating capacity 1000 kW (860.000 kcal/hr). Gas supply pressure 50-200 mbar. Max drying temp 200 deg. C. Operational speed: 100m/min (depending on material) , Siemens ET200 SP with processor S7-1500 automation system.
Prices VALID until Dec 17. 2024 (deposit should be received before Dec 17)
AA22/310325D/CAI-AI/M/AN/
Strahm Through-Air Dryer
Quantity: 1
Year: 2020
Type: HiPer Therm
Width: 1800mm
Fully refurbished in 2020 with complete electrical overhaul in 2020 with brand new Siemens inverters, two control displays, redundant control system server (WinCC) and Siemens PLC control system.
This installation consists of:
Spray system for binding agent (Latex) integrated in the first drying cabinet with vacuum suction box, suction fans and binding application pumps.
01*Autefa Solutions natural gas-heated 5-chamber dryer including 5 (five) recirculation fans, PLC frequency control and 5 gas burners (capacity 3 x 200 kW + 2 x 400 kW)
Second spray box with vacuum suction box, suction fans, pumps and conveyor belt.
01*Autefa Solutions natural gas-heated chamber dryer including 4 (four) recirculation fans, PLC frequency control and 4 gas burners (capacity 2 x 200 kW + 2 x 400 kW)
Complete dryer air circulation system with fans and exhaust air regulation
– Total installed heating power: 2600 kW
– Range of process oven temperatures: 100-220 C
– Max production speed: 100m/min
– Min production speed: 12m/min
– Product thickness in the range of: 0.5-6 mm
– Max product width: 1800 mm
This dryer was installed in a production line running latex bonded airlaid products, speed 40 – 70 m/min, 40 – 95 gsm products. Capacity 6.5 – 8 tons/day in 3 shifts. Possible end-products include: napkins, tablecloth, floor cloth, wipes, medical applications, industrial applications, wet wipes and food pads.
AG47/280325E/AOI-AI/M/
Thermobonding and Spray-Bonding Line
Year: 1990, ww: 3.2 m
Consisting of:
3x Bale openers
1x Bonino double doffer card, yoc: 1990, ww: 3.5 m, 2 swifts
1x Automatex cross-lapper, yoc: 1990, input: 3.5 m, output: 5 m
1x Mohr-Fleissner thermobonding oven, yoc: 1990, ww: 4 m, triple belt
1x Automatex cutting and winding unit, yoc: 1990, ww: 3.4 m
1x Masias edge trim opener
1x Magetron wadding compactor
Up to 350 kg/h
AG47/280325E/RA-T/M/
Automatex FA3000/TC Cross-Lapper
Quantity: 1, Year: 1998 – installed but never used, input: 3.2 m, output: 7.2 m, up to 100 m/min, machine is without the belts
AG47/210325E/YOI-RI/M/
Needling Line
Year: 1988-2017, ww: 2.4 m
Consisting of:
2 MTV bale openers, yoc: 2008, ww: 1.5 m
1 Hergeth bale opener
1 Rolando mixing opener
1 Bonino double doffer card, yoc: 1988, ww: 2.8 m, avantrain + 1 swift
1 MTV cross-lapper, yoc: 1999, input: 3 m, output: 2.6 m, up to 60 m/min
1 Sicam thermobonding oven, yoc: 1988, ww: 2.4 m, double belt, 3 burners, cooling section, calender
1 Automatex PR50/T finishing needle loom, with batt feeding system, yoc: 2001, ww: 2.7 m, double board downstroke, stroke: 60 mm, 8 200 needles/m
1 cutting and winding unit, yoc: 2017, ww: 2.5 m
Up to 700 kg/h
AG32/200325E/AIO-S/F/AN/
Dilo Needle Loom
Quantity: 1, Year:: 1986 (needle loom),1989 (feeding system)
incl. DILO feeding system
type: OD 2-25 (needle loom)
CBF / 25 (feeding system), 6864 (feeding system)
working width: 2.500mm
technical data: 12.000 needles / m, needle bar stroke 60mm
stroke rate max. 1.200 UpM, feeding system rebuilt / upgraded in 2020
AG82/190325/
Needle Punching Line
Width: 2.500mm,Bale Opener, Carding machine with feeder, Make: FOR
Working width: 2.500mm, Cross Lapper, Make: Autefa / C60, Working width: 2.500mm / 3.000mm
First Needle Loom, Make: Dilo / Di-Loom OUG-II S25, Second Needle Loom, Make: Dilo / Di-Loom OD-II S25, End-of-Line
AG47/140325E/TRI-RI/M/
Nordson Hotmelt Line
Year: 2004-2010, ww: 1.67 m, Wth unwinder, slitter/rewinder, flexo printer.
AG47/070325E/TR-L/M/
Bombi Thermobonding Oven
Quantity: 1, Year: 2004, ww: 2.5 m, Double belt, 3 zones, cooling section, calender.
AG47/070325E/CSP-AP/M/
Needling Line
Year: 1991-1998, ww: 3 m
Consisting of:
2x Laroche bale openers, yoc: 1991
1x Thibeau double doffer card, yoc: 1998, ww: 2.5 m
1x Asselin 390 cross-lapper, yoc: 1991, output: 3 m
1x Dilo OUG II finishing needle loom, with CBF, yoc: 1991, ww: 3 m, double board downstroke, double board upstroke, 6 000 needles/m
1x winder
AA22/040325D/SOI-YL/F/BQ/
GHC Group Short-Fiber Airlaid Line
Year: 2015-2023
Width: 660mm
For the production of hydrogen bonded airlaid, perfect to make pre-made cores (for absorbent products) for example underpads, food pads, meat pads, fruit pads, etc… with the following specifications:
75 – 400 gsm max mechanical speed 65m/min, average running speed 60 m/min (products 75-160 gsm).
Line consisting of:
Bottom Tissue Unwinding System
-Two pneumatic tissue loading bars, max roll diameter 35”/890mm (including the core) mm and max roll width 27.5”/700mm
-Automated tissue splice switch over
-Automated tissue tension bar bracket
Defibration System
-Two hammer mills and two pulp unwind stands, width of pulp sheet 23”/600 mm, roll diameter 19”/483 mm.
-Two volumetric fibre web feeders
Web Forming System
-Two web forming heads
-Two vacuum chamber systems including fan
-Two atomizing humidification systems
-Two blowers with dust collector
Web Transfer System
-Two conveyer belts travel systems
Top Tissue Unwinding Systems
-Two pneumatic tissue loading bars, max roll diameter 35”/890mm (including core) mm and max roll width 27.5”/700mm
-Automated tissue splice switch over
-Automated tissue tension bar bracket
Embossing System
-Heat press electrical oil driving roller
-Compacting embossing press with electrical oil boiler
Rewinding and Splicing Systems
-Six adjustable width splicing blades
-Max roll width is 26”/660mm
-Max roll diameter 42” /1070mm
-Automated roll splicing blade
-Automated winding roll changeover
-Trimming waste collection unit
Electrical System
-Ten A800 Mitsubishi Electric converters
-Ten Melservo-J4 Mitsubishi Electric servers
-Sixteen Danfoss VLT converters
-Ten Sinovo inverters
Dust Collection System, brand new in 2023
Can be offered with a new (2024) Jasch Model No.: JIL 400K GSM gauge sensor as well if of interest.
AG47/210225E/ALS-AY/M/
Fehrer NL 9/S Pre-Needle Loom
Quantity: 1, Year: 1983 – fully refurbished and modernized in 2024 (as new!), ww: 4 m, Single board downstroke, stroke: 60 mm, 1 200 rpm.
AG47/210225D/ALCI-OI/M/
Spunlace Line
Year: 2013, ww: 3.4 m
Consisting of:
3x Autefa bale openers
1x Autefa blending box
2x Autefa fine openers
1x Autefa card
1x Autefa cross-lapper
1x Autefa drafter
1x Hi-Tech card
1x Andritz spunlace system
1x Andritz drum oven
1x Wumag calender
1x slitting winder
Raw material: viscose, polyester
40-180 gr/m2
950 kg/h
AG47/080225E/ATII-LL/M/
Airlay Thermobonding Line
Year: 2008-2011
ww: 2.5 m
Consisting of:
3x Bonino bale openers, yoc: 2008, ww: 1.8 m
1x Bonino fine opener, yoc: 2008, ww: 2 m
1x Bonino Turbo Card airlay system, yoc: 2008, ww: 2.75 m
1x Sicam thermobonding oven, yoc: 2008, ww: 2.8 m, double belt, cooling section, length: 28 m
1x Technoplants accumulator, yoc: 2008, ww: 2.5 m
1x Technoplants cutting and winding unit, yoc: 2008, ww: 2.5 m
1x Technoplants wadding compactor and roll packaging machine, yoc: 2008, ww: 2.5 m
Up to 600 kg/h
AG82/280125/
FOR Carding Machine + Trutzschler FBK
Trützschler FBK 2500, Weighing Conveyor, FOR Double Doffer Card, Width: 2.500mm, Roller Feeding
1st Cylinder with 3x W/S Main Cylinder with 3x W/S, Double Doffer
Including all electrical, motors, Including control system
AG82/280125E/APS-P/M/AN/
Reisky & Schlese Carding
Quantity: 1
Year: 2004
Reisky & Schlese Hopper Feeder
– Feeding chute
– Horizontal conveyor
– Spike apron
Reisky & Schlese Weighing scale
Reisky & Schlese Nonwoven Card
Working weidth: 2.500 mm
– Upside down dish feeding system
– First Tambour with 2x worker/stripper
– Main Tambour with 5x worker/stripper
– 2x Doffer
– Roller take off
AG82/280125/
Spinnbau Random Card
Quantity: 1, Year: 1994, Type: 242, Working width: 2.500 mm, Capacity: max. 500 kg/h, Working speed: 30-140 m/min, Fibres: PES / PA 1,7 – 4 dTex 40-60 mm
Additional information:
Included:
SEW motors / gearbox motors
Control cabinet renewed in 2009 with SEW drives and with Siemens S7 PLC, Control desk
Not included:
Cables, The Machine / control cabinet was part of a nonwoven production line – modifications on the control system might be necessary.
AA22/190125/AN/
Complete Production Line for Bleached Cotton
Year: 1986-2013
For when absorbency, whiteness and purity are desired, cotton or other natural fibers can be scoured and bleached. Bleached cotton finds a wide range of end uses, such as medical and cosmetic swabs and in feminine hygiene and other absorbent hygiene products. This specific bleaching plant utilize one of the most common methods of cotton bleaching that is safe and eco-friendly. This method combines Hydrogen peroxide and Sodium hydroxide which requires less water and there is no need for souring after bleaching.
Complete cotton fiber bleaching line with a capacity of approximately 10 tons/day from opening of natural cotton in bales to compression of the bleached fiber also in bales. Preventive maintenance and cleaning is performed on a weekly basis.
The line is fully automatic (in house and Siemens S7-300) and employees have basically a monitoring role when line is running except for lifting the cake formed cotton to and from the bleaching vessels.
The unit consist in general of:
AA22/190125/
1x Hergeth/Trützschler fiber opening unit, Year: 2004-2009
Consisting of:
1x Hergeth GMP fiber opener, yoc: 2009 for 16 bales
1x heavy and foreign particles trap, yoc: 2009
1x JOSSI MD-21 fire and metal trap control, yoc: 2004
1x Hergeth silo for fiber and dust removal, yoc: 2009
1x Trützschler DX-385 Deduster, yoc: 1995
Capacity: maximum 2000 kg/hr
AA22/190125E/CT.L-Y/M/
1x Cake forming unit, Year: 1986-2007
2x stamping presses (one SME from 2007 and one Autefa from 1986) both fed with Trützschler condensers. Spray water is added in the process.
AA22/190125E/LI.L-P/M/
1x Obermaier bleaching unit, Year: 1986
Complete bleaching unit with 2 x bleaching vessels each containing 3 cakes for each batch, along with separate peroxide tanks/system and water tanks for rinsing. Capacity 10 - 12 tons/day.
AA22/190125E/RL.L-T/M/
2x Mühlmann hydroextraction units, Year: 2013
Max speed of 700 rpm, max dryweight 350 kg.
AA22/190125E/YL.L-P/M/
1x Temafa wet cake opening unit, Year: 1998
Type: Model 360, including feeder.
AA22/190125E/RP.L-T/M/
1x Fleissner drying unit, Year: 1998
Type: T6413, Cylinder dryer for fibers with 6 drums, drying fibers from aprx. 40% moisture down to average 6% moisture. Steam heated dryer (boiler not included) with a power consumption of 651 kW/hr. At exit is a built-in moisture control measuring moisture on band as well as a metal detector also built in on the transport band.
Fully automatic chemical process built in 2016 with Siemens S7 automation in house engineered. All installed in one room (see drawing)
Still on mill floor (but stopped).
Sold separately.
AG82/160125/
ASSELIN Rib Structuring Needle Loom
Quantity: 1, Year: 2002, Type: A50S SDB1, Working width: 4.400 mm
Stroke: 35 mm, Lamella Gauge: 3,5 mm, Stroke frequency: max 1.750 rpm
Needle pattern: approx. 10.570 N/m, Including electrical control cabinet.
AG47/130125E/RRL-CL/M/
Needling Line
Year: 1999-2010, ww: 5 m.
Consisting of:
1x Temafa bale opener
1x Temafa blending opener
1x Temafa carding willow
1x Temafa blending box
1x Trützschler fine opener, yoc: 2005
1x FOR double doffer card, ww: 2.5 m
1x Autefa cross-lapper, yoc: 1999, input: 2.5 m, output: 5 m
1x Dilo Di-loom finishing needle loom, with CBF, yoc: 1999, ww: 5 m, double board upstroke, 18 000 needles/m, 1 500 rpm
1x Dilo Di-loom finishing needle loom, yoc: 1999, ww: 5 m, double board downstroke, 18 000 needles/m, 1 500 rpm
1x Dilo Di-lour structural needle loom, yoc: 1999, ww: 5 m
1x Edge trim opener
1x Cutting and winding unit
AA10/070125/
Thibeau / Asselin Complete Nonwoven Line
Year: 1989, fully Refurbished in 2017
Width of the finished product: 2m20
Including:
– 1 Hopper feeder /bale-breaker
– 1 Rotary Opener
– 1 THIBEAU Card width 2m50 Type 123 PP double doffer
– 1 ASSELIN Cross Lapper Type 380, output in 2m50
– 1 ASSELIN cylinder needling machine
– 1 ASSELIN needling machine, width 2m24, Stroke: Down, 2920 needles/m.
– 1 ASSELIN needling machine, width 2m24, Stroke: Up, 2920 needles/m.
AG47/191224E/ORL-RL/M/
Needling & Thermobonding Line
Year: 1988-2019 – refurbished and modernized 2011-2022, ww: 2.2 m
Consisting of:
1x Temafa bale opener, yoc: 1988, ww: 1.3 m
2x Temafa Mixmaster blending boxes, yoc: 1988 – refurbished in 2019, length: 13.5 m, width: 3 m, height: 4.7 m
1x Temafa fine opener, yoc: 1989, ww: 1.3 m
1x Spinnbau double doffer card, yoc: 1988 – refurbished in 2019, ww: 2.5 m, condensing cylinders
1x Asselin Profile cross-lapper, yoc: 1997 – refurbished in 2017, input: 2.5 m, output: 3.3 m
1x Fehrer NL 9/S pre-needle loom, yoc: 1988 – refurbished in 2020, ww: 3.6 m, single board downstroke, 3 000 needles/m, 1 300 rpm
1x Fehrer NL 21/R finishing needle loom, yoc: 1988 – refurbished in 2011, ww: 3 m, double board upstroke, 6 000 needles/m, 1 300 rpm
1x Fehrer NL 21/R finishing needle loom, yoc: 1988 – refurbished in 2011, ww: 3 m, double board downstroke, 6 000 needles/m, 1 300 rpm
1x Dilo Di-lour II structural needle loom, yoc: 1994 – refurbished in 2018, ww 2.4 m
1x Icomatex latex applicator, yoc: 2019, ww: 2.4 m
1x Fleissner drum oven, yoc: 1988 – refurbished in 2022, ww: 2.2 m, 5 drums
1x Reyfam scattering unit and calender, yoc: 1996 – refurbished in 2021, ww: 2.2 m
1x Cima accumulator, yoc: 1990, ww: 2.25 m
1x Cima cutting and winding unit, yoc: 1990, ww: 2.25 m
Up to 500 kg/h
AA22/201224/
Thermobond line
Quantity: 1
Year: 1985 – 2018
Air-through bonding process involves forming a web of fibers and passing it through a stream of high-velocity air, which entangles and bonds the fibers together. The benefits of air-through bonded nonwovens are Strength and Durability, Improved Breathability and Softness. These characteristics suit especially for Hygiene Products, Medical Textiles, Filtration Media and Wipes and Towels.
Overall, the air-through bonded process provides manufacturers with a versatile method to create nonwoven materials with specific characteristics tailored to different applications.
Type: airthrough bonding line
Width: 3000mm
Complete production line for airthrough bonded products, such as ADL and filtration, consisting of:
2 opening and blending lines, yoc: 1985 – 1995, each consisting of:
04 Hergeth Hollingsworth bale openers with electronic weigh scales, ww: 1500 mm
01 Hergeth SBL-1000 mini mixers
Feeding into:
05 Trützschler MWS weigh hopper feeders
05 Trützschler RSK and SFO fine openers and cleaners including fans, metal traps and LVSA condensors
05 Trützschler FS-5 reserve filling boxes incl LVSA condensors
05 Hollingsworth Tandem Mastercards, yoc: 1985 – 1995, ww: 3000 mm with Hergeth MC or Trützchler FBK-535 chutefeeds.
01 Technoplants Multiline ADL 32 dryer, yoc: 2018, with 4 x Maxon Valupak burners and 4 hot air fans to recirculate hot air for temperature control. Max temp 220 deg. C, Controlled by touch screen HMI, Siemens electronics and PLC, web width: 3000 mm.
01 A. Celli Stream pope winder, yoc: 2018, ww: 3000 mm (web width), max roll dia 2500 mm, , 30-300 N/m web tension, max production speed 150 m/min, 4 winding shafts suitable for 6 inch cardboard cores. With shear tangential “Slitto” system if cutting trim to wind master rolls is needed.
01 ISRA scanning gauge, yoc: 2018, ww: 3000 mm (web width)
01 A. Celli Tandem slitter/rewinder, yoc: 2018, ww: 3000 mm (web width) max production speed 500 m/min, web tension 30-300 N/m, max roll dia for unwind 2500 mm, shear tangential “Cotta” slitting system with 35 knives, minimum slitting width 60 mm. Rewind of finished roll – max dia 1250 mm. Siemens electronics for touch screen, logic and motor control.
AG82/101224/
Tectex Needle Loom
Quantity: 1, Year: 2019, Type: QP30, Working width: 3.000 mm, Needling: 4 Boards, 2 Down-Stroke/2 Up-Stroke, Stroke: 60 mm, Strokes: max. 1.200 Strokes/min, Needles: approx. 4 x 5.000 Needles/m, Including Batt Feeding Unit, Including Control System.
AG82/101224/
Dilo DiLour-II25
Quantity: 1, Year: 1985, Working width: 2.500 mm, Needling: 2 Boards Down-Stroke, Stroke: 40 mm, Strokes: max. 1.200 Strokes/min, Needles: approx. 2 x 4.000 Needles/m, Including Unwinder, Including Winder, Including Control System.
AG82/101224/
Dilo Needle Loom OD-II25
Quantity: 1, Year: 1991, Working width: 2.500 mm, Needling: 2 Boards Down-Stroke, Stroke: 60 mm, Strokes: max. 1.200 Strokes/min, Needles: approx. 2 x 1.920 Needles/m, Including Unwinding Station, Longitudinal & Cross Cutting, Winder and Control System.
AG47/220524E/TA-T/M/
Airlay Needling line
Quantity: 1, Year: 1982 – upgraded with Siemens PLC and frequency inverters in 2003, ww: 2.3 m
Consisting of:
1 Fehrer K12 airlay system, ww: 2.3 m, 1 Asselin 169 pre-needle loom (drum tacker), ww: 2.8 m
1 Fehrer NL 21 finishing needle loom, ww: 2.4 m, 4 500 needles/m, Up to 500 kg/h
AG47/091224E/COY-AY/M/
Airlay Needling Line
Year: 2016, ww: 2.6 m
Consisting of:
2x Bematic Bemablow fine openers, Year: 2016, ww: 2.5 m
1x Bematic T-Max 350 airlay system, Year: 2016, ww: 2.6 m
1x TecTex PR50 pre-needle loom, with batt feeding system, Year: 2016, ww: 2.8 m, double board downstroke, stroke: 70 mm, 3 500 needles/m, 1 100 rpm, with unit to turn the material backwards into the loom for second needling and hence machine can work as a finishing needle loom.
AG47/061224E/YS-Y/M/
Autefa CL 2003 Cross Lapper
Quantity: 1, Year: 1995, Input: 3 m, Output: 5 m.up to 100 m/min
AA22/291124E/RA-R/F/AQ/
Schott & Meissner Calender
Quantity: 1, Year: 1998, Width: 2500mm, 2-cylinder smoothing calender, gap adjustment 0,3-10 mm, pressure 4 tons on full width, max bend 0,2 mm on full width, thermo-oil heated including Aura boiler, cylinder dia 350 mm – stainless steel cylinders covered with Teflon, fabric guiding with two guide rollers for S-guiding as well as feed table for tensionless infeed. Chain drive – one motor for both cylinders. Speed 1-30 m/min, max temp 230 deg. C.
Prices VALID until Dec 17. 2024 (deposit should be received before Dec 17)
AA22/281124E/LA-L/M/AZ/
Ramisch Kleinewefers Calender
Quantity: 1, Year: 1987, Width: 4700mm, 2 cylinders, with two cooling cylinders, max. temperature 240°C +/- 1°C, max. pres. 150 N/mm, including Auratemperature control unit.
Prices VALID until Dec 17. 2024 (deposit should be received before Dec 17)
AG47/210624E/AO-C/M/
Dilo Pre-Needle Loom
Quantity: 1, Year: 1980s – refurbished in 2017, ww: 2.2 m, Double board downstroke, Stroke: 60 mm, 1 768 needles/m, 1 000 rpm, with longitudinal cutting and winding unit.
AH37/281124/BF/
Spinnbau Bremen Cards
Quantity: 4
3x Year 1974 – 1976, Model F1780-500, working Width 2500 mm.
1x Year 1985, Model System 2000, Working Width 2500 mm.
AH37/281124D/YI-AI/M/BF/
3x Year 1974 - 1976
AH37/281124D/LL-AI/M/BF/
1x Year 1985
AA22/281124E/YC-Y/M/BR/
Dilo Structural Needle Loom
Quantity: 1, Year: 1989, Width: 4500mm, Type: DI-LOOP DS 45
Dilo invented the structuring and patterning of preneedled needlefelts in the 1960s. In this process, special fork needles transport fibre loops from the needlefelt into a lamellar grid resulting in pile loops on the backside of the needlefelt. By using different needle arrangements and multi-coloured layers of needlefelts, a great variety of patterns can be realized. A programme-controlled lifting and lowering of the lamellar table allows three-dimensional designs, ideally used for carpets and door mats with patterns, ribcord, tufts, velour structures. High capacity structure loom for ribcord, velour type needle felts and advance patterns, 40 mm stroke, 1500 strokes/min, 6000 needles/lm, gauge 3.5 mm, automatic lubrication, temperature control, and lubricant discharge. Complete with Dilo SW 45 feeding unit and un-winding unit and control panel + electronic software for patterning design.
Prices VALID until Dec 17. 2024 (deposit should be received before Dec 17)
AG82/261124/
Needle Punching Line
Quantity: 1, Capacity: 600 – 750 kg/h depending on fibres, Fiber: synthetic & viscos, Fiber fineness: 1,7 – 6,7 dtex, Grammage: 50 – 1200 g
Consisting of:
Blending line – Make: Truetzschler
Fine opener – Make: Truetzschler, Card feeder – Make: Truetzschler – Type: FBK
Weighing scale, Carding machine – Make: Reisky & Schlese – WW: 2.500mm – double doffer
Crosslapper – Make: Reisky & Schlese – WW: 4.500 mm, Web drafter – Make: Asselin – WW: 4.300 mm
Needle loom – Make: DILO – Type: DI-Loom OUG II S40, Metal detection – Make: Mesutronic
Winder – WW: 4.000 mm, Edge trim opener – Make: Temafa
AG47/231124E/RP-R/M/
Fehrer NL 28/S Pre-Needle Loom
Quantity: 1, Year: 1987, ww: 3 m, single board upstroke, stroke: 60 mm, 900 rpm.
AG47/011124E/ASS-AY/M/
Needling Line
Year: 1986, ww: 3 m
Consisting of:
1x Spinnbau double doffer card, ww: 2.5 m, avantrain + 1 swift, randomizing cylinders
1x Autefa cross-lapper, input: 2.5 m, output: 3.5 m
1x Spinnbau double doffer card, ww: 2.5 m, avantrain + 1 swift, randomizing cylinders
1x Autefa cross-lapper, input: 2.5 m, output: 3.5 m (top insertion trolley is missing)
1x Dilo OD I 35 pre-needle loom, with CBF, ww: 3.5 m, single board downstroke, stroke: 60 mm, 2 850 needles/m, 1 200 rpm
1x Dilo OD II 35 finishing needle loom, with CBF, ww: 3.5 m, double board downstroke, stroke: 60 mm, 8 000 needles/m, 1 200 rpm
1x Dilo TC 30 accumulator, ww: 3 m
1x Dilo OUG II 30 finishing needle loom, ww: 3 m, double board downstroke, double board upstroke, stroke: 40 mm, 13 300 needles/m, 1 200 rpm
1x Dilo TC 30 accumulator, ww: 3 m
1x Dilo OUG II 30 finishing needle loom, ww: 3 m, double board downstroke, double board upstroke, stroke: 40 mm, 16 000 needles/m, 1 200 rpm
1x Dilo TC 30 accumulator, ww: 3 m
1x Dilo cutting and winding unit, ww: 3 m
2x Temafa edge trim openers
Up to 400 kg/h
AA10/291024/AP/
FOR Double Doffer Card
Quanttiy: 1, Year: 1991, ww: 2.5.
+ 1 Asselin cross-lapper, input: 3 m, output: 2.5 m
Suitable for fiber 6 Denier, 64mm. Machine is with complete electrical cabinet. Production capacity is 400 kgs/hour. The electrical cabinet is year : 2014, Hopper Feeder not included, Machine is on factory floor but stopped.
AF12/251024E/YRL-RL/M/AX/
1 x 5.0m Dilo Needleloom Nonwoven Line with Dilour Raising (for Automotive)
Year: 1999
Brief technical information:
Fibre Blending
Temafa 25m Conveyor (fits 8 bales end to end)
Temafa Single pin sheet blending hopper with Volumetric feed
Temafa Fearnaught Fibre opening, Type RD02
Oiling
Temafa Metal detection
Fan
Feed to either:
Temafa Mix master blending bin with conveyor floor (approx. 20m x 4m) – Type MM20 / 2
Or
Temafa Small Blending bin (5m x 5m)
Or
2 x Temafa blending bins each approx. 2500kgs with single bin Temafa emptier
Temafa fabric condenser and feed tower (10m high)
Trutzschler FD-S fine fibre opening (2005)
Carding
Trutzschler volumetric card hopper feed
2.5m FOR multi-cylinder nonwoven card with double doffer (Serial No. 83001)
Production rate up to 500kgs per hour
Cross lapper
Autefa Cross Lapper (Type 190 73) with 2.5m inlet and 5.0m max lay width (1999)
Serial No 3026
Needlepunch
Sound proof cabinet
5.0m Dilo pre needle (Type CBF T 50, 1999)
(Input web compression sheets with finger system)
5.0m Dilo Needle loom 1:
Type DI-LOOM UD-Li S 50 (1999)
Stroke: UP
Twin Board
Total Needles 90000
Needle Density: 1800 needles /m
Max Gap: mm
Max needled width: 5.0m
RPM: 1500 (Max)
5.0m Dilo Needle loom 2:
Type DI-LOOM UD-II i S 50 (1999)
Stroke: DOWN
Twin Board
Total Needles 90000
Needle Density: 1800 needles /m
Max Gap: mm
Max needled width: 5.0m
RPM: 1500 (Max)
5.0m Dilo Needle loom 3 (Dilour):
Type DI-LOUR-II SXBG 50 (1999)
Stroke: DOWN
Twin Board
Total Needles 160000
Needle Density: 3200 needles /m
Fork needles
Brush conveyor
Max Gap: mm
Max needled width: 5.0m
RPM: 1900 (Max)
Finishing
Menzel J Box
Menzel Overhead gantry
Menzel 5m metal detection
Sellers 5m cropping/shearing + 12 bag fibre/lint collection (2008) (not been used for several years)
4 head edge and centre fabric slitting
Edge trim – Hepp-Schwamborn (Germany) – Edge shredding with fan
ETF cross cutting
ETF batching roll wind-up (2006)
Fabric measure
ETF cross cutting
ETF take-off rolls
6 x fabric roll transport trucks
Electrical Supply: 3 Phase 380-440v, 50Hz
Spare parts: All related spare parts and accessories available in the factory (If any).
Manuals: All manuals available in the factory (If any).
Currently being used in the production of: Automotive Nonwoven Velour Fabrics
Additional information:
Status: Still operating and can be seen running
Condition:Complete and in good working condition
Delivery: End March 2025 onwards
Transport: 25 x 240ft Container (Estimated)