AI59/300625/
Fiber Openers & Felt Opener Unit
1- Davis & Furber 6 bar pin picker with 20 hp main and feed table with porcupine feed roller.
Has 20 hp main with 1.5 hp gear drive. There is a variable frequency drive on the feed table. There are motor guards and transition included but not attached. There are 5-6 pins missing or damaged.
2- Kirschner 3 blade Fine Opener hopper fed about 54" wide and 10 hp main with several feed rolls and transition.
Just 3 large lags with sharp pins. 10hp main no controls but I can supply a switch to start. 440v 3 phase and 1.5hp gear. There is compression roll to large feed roll that feeds 2 smaller fluted feed rolls. It is hopper fed with electronic eye. Width is 54" across the drum. Photos show last feedrolls before entering the transition.
3- Toyota Felt Trim Opener with large feed table and coarse wired drum about 24" drum x 48" wide It has a 15 hp main and extra cylinder.
48" wide x 24" diameter cylinder with extra cylinder. 15 hp main and 2.2kw gear with large feed table conveyor. Double fluted feed rolls. Has a small fiber condenser to separate but it is disassembled currently.
4- JD Hollingsworth shredmaster with large feed table and large wired in feed roll, 3hp and transition.
These could be used for wool and waste processing.
toyota felt opener's main motor maybe removed
some spare drums maybe given
Wooden Pin lagged drum missing 1 lag about 39" long 15" diameter.
Cotton cleaner wire cylinder fine wire 48" long x 15.5" diameter and coarse tooth feed roll to match needs
The lengths are as follows:
1 Davis&Furber without transition attached feed
2. Toyota felt opener in feed conveyor removed 10-1/2'
3. Kirschner fine opener with transition attached 6'
4.Hollingsworth shredmaster 5'