AA02/250925/BY/
COMPLETE SCHOTT & MEISSNER NONWOVEN COATING-LAMINATING LINE
YEAR 2014
WORKING WIDTH 2400 MM
ROLLER WIDTH 2600 MM
MEDIUM: PHENOLIC RESIN, EPOXY OR PP-POWDER UP TO 500µ
ENDPRODUCT: INSULATION MATERIAL
Consisting of:
1x SCHOTT & MEISSNER TYPE VAPCON® HT- STEAM OVEN
with Steam Generator and Water treatment
450 kW Burner incl. chimney
Steam Heating Section 3m
Transport System with Cleaning station
Steam heated top plates.
Steam Generator approx. 400 kW, 12 bar
Speed 1…20 m/min.
Temperature 180 deg C
Belt Type Stainless Steel rod mesh belt
Belt Cleaning by combined brush roller, over rails adjustable
Incl. spike roller (to break up the dirt on the rod mesh belt)
All drives are frequency controlled
1x SCHOTT & MEISSNER TYPE TOPCON®MAP DOUBLE BELT DRYER
for drying residual moisture after the steam oven
1 x 2m TOPCON®MAP Heating Section
Direct heated by gas blower burner, circulating air blower with
capacity 15.000 m³/h
1 x Exhaust fan with Capacity 6000 m³/h
Conveying system incl. belt guiding system and belt tensioning
TOPCON®MAP for suction treatment or spraying (can be changed)
TOPCON®MAP heating zone 1 level suction dryer
Incl. housing
Direct heated air burner 150 kW
Max. Temperature 200 deg C
Transport system with two free-running conveyor belts
Top Band – wide spiral belt
Lower Belt – wide spiral belt
All drives are frequency controlled
1x EMDE BIG-BAG POWDER CONVEYING STATION
Powder conveying device for powder spreading unit incl. distribution
unit in the spreading hopper of the powder spreader
dust -free big bag emptying station
1x SCHOTT & MEISSNER POWDER SCATTER
Material Hopper with spreading roller unit
Incl. quick change unit
Oscillating brushing unit
Closed design
Servo Drive for spreading roller
Spreading material: phenolic resin, epoxy of PP-Powder up to 500µ
Spreading Roller: steel core with needling tape wrapping
Spreading Roller Diameter: 180 mm
Oscillating brush belt – Total stroke 6 mm
Ionization arranged below the brushing belt
All drives are frequency controlled