AA02/020725/AR/
Complete Airlay Thermo Bonding Line
Fiber Preparation:
1x TEMAFA Fiber Blending Bin
Model Mix Master, With flat belt and Bin emptying system and inclined spiked apron, 5000 lbs Capacity.
1x TEMAFA Heavy Particle Separator
With transport fan
1x TEMAFA Fine Opener
1600mm working width, With Transport fan.
1x MESUTRONIC Metal detector
With drop bag collector
1x TEMAFA Reserve Hopper
With Condenser and Transport fan.
Airlaid Carding:
1x THIBEAU Card Chute Feed
Model TMS/TCF, Working width 2500mm.
1x ANDRITZ Weight controller
Model Servo X
1x SAURER- FEHRER High Loft card feeder
Model V21
1x SAURER-FEHRER Airlay Card
Model K12, With High loft, 2400mm working width.
Thermobonding Oven:
1x FLEISSNER Air Through Oven
Model Vario Air TV/Z24, Nat Gas Heated, 6 Zones, (4 heating), (2 Cooling), Transfer Belts, Double Teflon net belts, (1 top & 1 Bottom), With height adjustment.
Winding and Take off:
1x TECHNOPLANTS Accumulator
Type AC.26.MB, Motorised, 100 Yard Content.
1x TECHNOPLANTS Automatic Compression winder
Low tension accumulator, Working width 2600mm, With (3) crush cut slitters, Trim grinders, Cross cutter, Automatic tube loader, Automatic roll doffing, 1500mm max roll diameter.
AUXILLIARY EQUIPMENT:
1x ATLANTA ATTACHMENT LAMINATOR
Year 2007, Model 1966, 90" (2286mm), Variable Speed Drive, Laminates Tick to Fiber or Foam, Roll Entry / Exit.
Controls for: E-Stop, Auto/Manual, Glue On/Off, Forward/Reverse, Nip Roll Open/Close, Winder Forward/Reverse, Nip Roll Jog, Glue Dispensing Tower, Auto Glue Level Sensor, Pass Through Cat Walk, Production Speed 60' / Minute.
1x BIRCH LIGHTED INSPECTION RE-ROLL FRAME
100" Width, E&L Guider, Yardage Counter, Merrow Butt Seamer, Emery End Seamer.
1x INTERNATIONAL HORIZONTAL BALE PRESS
Model C54, 45’’ x 27’’ x 54’’ bale size, 102’’ H x 52’ W, 205’’ L dimensions, 25’’ L x 30’’ W hopper dimensions, 450-500 lbs bale nominal weight, 7’’ main cylinder, 23 second cycle time, Closed door manual tie.
Additional Carding and Needle Punch Machines
1x FEHRER AIR LAY CARD
Model K12, 2.4 meter working width, With K12 Inlet rollers, Garnet 40HP, Year 1998.
1x KUKLA WEB TRANSFER TABLE
Model E-DBAU-A 2400/1700, Year 1990.
2x FEHRER FIBER FEED SYSTEMS
Model FFS 2.4, 2.4 meter wide, And feed table 240cm wide, Year 1998 & 1999.
2x FEHRER NEEDLELOOMS
Model NL9/S, 240cm working width, Single Board Down Stroke, Year 1998 & 1999.