AB15/220426/AX/
Yarn Spinning Line Synthetic & Wool in Europe
SEE DETAILS ON EXCEL SHEET ON THE LINK
NSC GC12 – RL5 Re-Breaker / blender 1 x 1 delivery Auto can doff 1000×1200 – 32 end ball creel
NSC GC13 1989 Auto leveller 1 x 1 delivery Auto can doff 1000×1200 – 8 end creel (2×4) OR St Elois bump press with new (2016) Valven knotter
=========
DRAWING ACRYLIC OR WOOL
Cognetex SCE11/VA 1992 approx’ Auto leveller 1 x 1 delivery Auto can doff 800×1200 – 12 end creel (2×6)
Cognetex SCE420/22V 1992 approx’ 2nd Passage 1 x 1 delivery Auto can doff 800×1200 – 10 end creel (2×5)
Cognetex SCE/420/24V 1992 approx’ 3rd Passage 2 x 4 delivery Auto can doff 800×1200 – 16 end creel (2×8)
NSC FMV32 1990 approx Finisher 20 Spindles Modified doffing trays to rear
=========
DRAWING FOR WOOL
NSC GN4 1970’s Comb gill 2 x 2 delivery Manual can doff 400×1000 – 8 end creel (2×4)
Cognetex SC11V 1989 Post comb gill 1 x 1 delivery Auto can doff 600×1200 – 8 end creel (2×4) – NOT AN A/L
Cognetex SC11VA 1989 Auto leveller 1 x 1 delivery Auto can doff 600×1200 – 8 end creel (2×4)
Cognetex SC11VA 1990 3rd Passage auto leveller 1 x 1 delivery Auto can doff 600×1200 – 8 end creel (2×4)
Cognetex SC11V 1990 4th Passage 1 x 1 delivery Auto can doff 700×1000 – 8 end creel (2×4)
NSC FMV32 1992 Roving Finisher 12 Spindles
=========
DRAWING FOR WOOL
NSC GN5 1970’s Nylon pre-mix 1 x 1 delivery Manual can doff 600×900 -12 end creel (2×6)
Sant Andrea CSN 1998 Pre-Mix 1 x 1 delivery Auto can doff 800×1000 – 8 end creel (2×4) Modernised PLC & Touchscreen (Mitsubishi) 2023
Sant Andrea CSN 1990 1st Passage 1 x 1 delivery Auto can doff 800×1200 – 12 end creel (2×6)
Sant Andrea CSN – ARM 1990 Auto leveller 1 x 1 delivery Auto can doff 800×1200 – 10 end creel (2×5)
Sant Andrea SH22 1990 3rd Passage 2 x 2 delivery Auto can doff 800×1200 – 10 end creel (2×5) pin roller gill
NSC FMV 32 1995 Roving Finisher 20 Spindles
=========
DRAWING FOR WOOL
NSC GN5 1970’s Sampler 1 x 1 delivery Manual can doff 700×900 -8 end creel (2×4)
=========
SPINNING
Gaudino FPB 99 / 260 / La 1999 Ring spinning 704 Spindles – Auto doffing – SKF PK 1601 draft – 82.5mm Pitch – 55mm ring diameter – 260mm tube length -SKF silent spindle – spinning finger – Magitex blower – double drive
Gaudino FPB 99 / 260 / La 1999 Ring spinning 640 Spindles – Auto doffing – SKF PK 1601 draft – 90mm Pitch – 60mm ring diameter – 260mm tube length – spinning finger – Magitex blower – double drive
Gaudino FPT 260 1998 Ring spinning 640 Spindles – Auto doffing – SKF PK 1601 draft – 90mm Pitch – 60mm ring diameter – 260mm tube length – spinning finger – Magitex blower – single drive
Zinser 319L 1985 Ring spinning 516 Spindles – CoWeMat auto doffing – SKF PK 1601 draft – 90mm Pitch – 65mm ring diameter – 280mm tube length – Magitex blower – New Mitsubishi Inverter drive (2018) – single tangential drive
Zinser 319L 1985 Ring spinning 516 Spindles – CoWeMat auto doffing – SKF PK 1601 draft – 90mm Pitch – 65mm ring diameter – 280mm tube length – Magitex blower – New Mitsubishi Inverter drive (2018) – single tangential drive
Zinser 319L 1989 Ring spinning 516 Spindles – CoWeMat auto doffing – SKF PK 1601 draft – 90mm Pitch – 65mm ring diameter – 280mm tube length – Magitex blower – New Mitsubishi Inverter drive (2018) – single tangential drive
Zinser 319L 1989 Ring spinning 516 Spindles – CoWeMat auto doffing – SKF PK 1601 draft – 90mm Pitch – 65mm ring diameter – 280mm tube length – Magitex blower – New Mitsubishi Inverter drive (2018) – single tangential drive
Zinser 319L 1989 Ring spinning 516 Spindles – CoWeMat auto doffing – SKF PK 1601 draft – 90mm Pitch – 65mm ring diameter – 280mm tube length – Magitex blower – New Mitsubishi Inverter drive (2018) – single tangential drive
Sant Andrea FE288 1974 Ring spinning 288 Spindles – Manual Doff – SKF PK 1601 draft – 82.5mm Pitch – 55mm ring diameter – 260mm tube length – Twin drive 144 spindles per side tangential drive – New Mitsubishi Inverter drive
Sant Andrea FE288 1974 Ring spinning 288 Spindles – SKF PK 1601 draft – 82.5mm Pitch – 55mm ring diameter – 260mm tube length – Twin drive 144 spindles per side tangential drive – New Mitsubishi Inverter drives – Manual doff – compact system retrofitted approx’ 2014
==========
WINDING/AUTOCONER
Savio ECO PULSAR L 2020 Cone Winder 1 80 Spindles
Savio ECO PULSAR L 2020 Cone Winder 2 64 Spindles
Savio ECO PULSAR L 2020 Cone Winder 3 74 Spindles includes 10 sp cone to cone
Wm Arnold 1970’s Autoclave Vacuum only Volume 3.15m³ (ø=1.35m x 2.2m long) – Ecapsulated insulation – Modern control panel with Mitsubishi inverter & touchscreen (2020)
==========
AEEMBLY WINDER
Fadis Sincro B 510 Premium 2023 Assembly winder “a) Drive end prepared for extension up to 75 spds
* Touch Screen coloured computer for programmes creation / modification / memorization,
* Remote control with Fadis / Industry 4.0.
* Connecting kit for 25 + 25 spds machine as per enclosed layout .
b) Spindle : 50 individual spindles with individual set up / programming per each spindle
* Take up : 10″” cylindrical tube on all 50 spds
* Bobbin brake stoppage system in case of yarn breakage
* Tensioning system : 1 Tens Control-Online automatic tensioning system for each spindle , ceramic disc type
* Automatic doffing with movable cutter and long slide deposit for 2 full packages having 265 mm dia
c) 40 spds with separate creel for 3 plies + 3 tail end x 320 mm feed packages max dia
10 spds with separate creel for 4 plies + 4 tail end x 280 mm feed packages max dia
* with 2 bale roller for yarn coming from separate creel – no ceramic separator – only rotating godet
* with slight separation between spd 20 and 21 of 320 mm to be able accomodate all bobbins
d) Nr 2 Mesdan ats rail with 1 Air splicer
e) Nr 2 Magitex blower/ sucker
* 5 spds per section , single sided”
=============
TWISTING
Volkmann VTS 05 1990 2 for 1 twisting 120 spls, 10″ input 10″ output, double drive
Volkmann VTS 050 1999 2 for 1 twisting 88 spls with or without balloon limiter, 10″ input 10″ output, double drive
Savio Geminis 244c 1999 2 for 1 twisting 180 spindles, Magitex blower, Mesdan air track splicers – Basket ø 185mm
Savio Geminis 244c 1999 2 for 1 twisting 180 spindles, Magitex blower, Mesdan air track splicers – Basket ø 185mm
Savio Geminis 244c 2000 2 for 1 twisting 180 spindles, Magitex blower, Mesdan air track splicers – Basket ø 185mm
Savio Geminis 244c 1999 2 for 1 twisting 200 spindles, Magitex blower, Mesdan air track splicers – Basket ø 185mm
Savio TDS15N 1993 2 for 1 twisting 220 spindles, Magitex blower, Mesdan air track splicers – Basket ø 165mm
Savio TDS15N 1993 2 for 1 twisting 220 spindles, Magitex blower, Mesdan air track splicers – Basket ø 165mm
=========
BALLING
C&L HG1000 2022 STEAMER 10 track Thread laying heads, Steam connection, Thread break sensor, Single drive support belts, Lint drawer, Multi-threaded overlay, Control cabinet with touch screen control panel, Water level switch, Single drive support heads
C&L HG1000 2022 STEAMER 10 track Thread laying heads, Steam connection, Thread break sensor, Single drive support belts, Lint drawer, Multi-threaded overlay, Control cabinet with touch screen control panel, Water level switch, Single drive support heads
C&L KAB2000 2022 BALLING MACHINE 20 spindles Discharge conveyor for packaging, Automatic banding process, Banderol flap, Banderol control, Cup conveyor with grippers, Assembly of banding unit, Place banderol out of magazine, Banderol magazine, Automatic scissors at the winding end, Flyer adjustment, Servo motor mandrel drive, View of winding process
C&L VP100 2022 CONVEYOR Doffing from balling machine, Balls presented to ball packer in rows
C&L PB200 2022 PACKAGING DEVICE “Equipped with barcode printing system and automatic application device for self-adhesive labels
onto the bottom of the plastic bags.
– ball weight from approx. 25 – 100 g (subject
to trials)
– ball packaging of 1 or 2 rows of balls in one level
– max. output of approx. 6 bags per minute
Operation touch screen panel with PLC control
Doffing from balling machine
Bag magazine”
C&L HG1000 2023 STEAMER 10 track Thread laying heads, Steam connection, Thread break sensor, Single drive support belts, Lint drawer, Multi-threaded overlay, Control cabinet with touch screen control panel, Water level switch, Single drive support heads
C&L HG1000 2023 STEAMER 10 track Thread laying heads, Steam connection, Thread break sensor, Single drive support belts, Lint drawer, Multi-threaded overlay, Control cabinet with touch screen control panel, Water level switch, Single drive support heads
C&L KAB2000 2023 BALLING MACHINE 20 spindles Discharge conveyor for packaging, Automatic banding process, Banderol flap, Banderol control, Cup conveyor with grippers, Assembly of banding unit, Place banderol out of magazine, Banderol magazine, Automatic scissors at the winding end, Flyer adjustment, Servo motor mandrel drive, View of winding process
C&L VP100 2023 CONVEYOR Doffing from balling machine, Balls presented to ball packer in rows
C&L PB200 2023 PACKAGING DEVICE “Equipped with barcode printing system and automatic application device for self-adhesive labels
onto the bottom of the plastic bags.
– ball weight from approx. 25 – 100 g (subject
to trials)
– ball packaging of 1 or 2 rows of balls in one level
– max. output of approx. 6 bags per minute
Operation touch screen panel with PLC control
Doffing from balling machine
Bag magazine”
Jumbo balling machine
C&L HG800 2023 STEAMER 8 track Thread laying heads, Steam connection, Thread break sensor, Single drive support belts, Lint drawer, Multi-threaded overlay, Control cabinet with touch screen control panel, Water level switch, Single drive support heads
C&L KG80 2023 BALLING MACHINE 8 spindles large ball (400gm), Touch-Panel, Automatic scissors at the winding end, Flyer adjustment, Servo motor mandrel drive, Safety light barrier mandrel drive
Band forming machines
C&L ED1000 2022 BANDING MACHINE “- Paper strips are taken from the paper magazine
– Paper strips are folded
– self-adhesive labels are taken from a roll of pre-printed labels – Paper strip length: 250 – 400 mm
– Paper strip width: 25 – 50 mm or – 75 mm or – 100 mm
– Band length: 95 – 180 mm
– Max. label size: 39 x 36 mm
– Max. output with band width 50 mm:
approx. 2500 bands/h at 100 % efficiency (output depending on band measurement and paper quality)” “INCLUDED WITH
BALLER”
C&L ED1000 2022 BANDING MACHINE “- Paper strips are taken from the paper magazine
– Paper strips are folded
– self-adhesive labels are taken from a roll of pre-printed labels – Paper strip length: 250 – 400 mm
– Paper strip width: 25 – 50 mm or – 75 mm or – 100 mm
– Band length: 95 – 180 mm
– Max. label size: 39 x 36 mm
– Max. output with band width 50 mm:
approx. 2500 bands/h at 100 % efficiency (output depending on band measurement and paper quality)” “INCLUDED WITH
BALLER”
C&L T4 2023 CAN FILLING MACHINE Never used
AF08/170426/BA
Saurer, machines model of VGT-11-04, , 4 ply 1, Multi glass fiber twisting
80 spindles,
Year of make: 2022
machine stopped in the floor, still connect the power cable, can show the running,
AB46/170426/AR/
Volkmann VTS 05-0-C Twisting and Cabling (Oerlikon Saurer Cabler)
Quantity: 3, Year: 2010, Model 05-0-C, 144 spindles each, 500 gauge, POT diam 295mm, Alligator tensioners in creel
Design / Version (Bauart): 8.02
2 drive motors per machine
Machines are still on Mill Floor
AA08/100426/
VOLKMANN 2×1 Twister VTS 07
VOLKMANN 2×1 Twister mod. VTS 07 Bauart 5.70
Quantity: 1, Year: 2000, 176 spindles, feeding 8″ (200 mm) from assembly winder, exit 6″ 4°20, waxing device, pneumatic threading, Inverter
AB45/020426E/LY-Y/F/AQ/
Volkmann VTS05 C TFO
Quantity: 1, Year: 1991, 104 spindles, Alimentation 10”, Exit cone 10”, pneumatic threading, Blower, 380 V 50 HZ, Condition:Dismantled
This TWO FOR ONE machine work cotton, it is for course counts,
AA03/310326/BY
Volkmann VTS 08 & Assembly Winders
assembling winder, FMX-T-HED, Mettler (SSM), 1990, spindles: 72, Feeding: 2-ply outstanding creel, Exit Tubes: cylindrical 195mm
assembling winder, Rite A.G.R, Rite, 1992, spindles: 42, Feeding: 2-ply outstanding creel, Exit Tubes: cylindrical 195mm
two for one twister, DD VTS 08, Volkmann, 1991/2022 with inverter, spindles: 180, Feeding: assembling cones 195mm, Exit Tubes: cylindr. / conical 6″, waxing
two for one twister, DD VTS 08, Volkmann, 1991/2022 with inverter, spindles: 180, Feeding: assembling cones 195mm, Exit Tubes: cylindr. / conical 6″, waxing
two for one twister, DD VTS 08, Volkmann, 1991/2022 with inverter,spindles: 180, Feeding: assembling cones 195mm, Exit Tubes: cylindr. / conical 6″, waxing
two for one twister, DD VTS 08, Volkmann, 1991/2022 with inverter,spindles: 180, Feeding: assembling cones 195mm, Exit Tubes: cylindr. / conical 6″, waxing
two for one twister, DD VTS 08, Volkmann, 1990,spindles: 12, Feeding: assembling cones 195mm, Exit Tubes: cylindr. / conical 6″, waxing
AB46/310326/AR/
Oerlikon Saurer Cabler
AB46/310326D/PC-O/F/AR/
Volkmann VTS 05-0-C Twisting and Cabling (Oerlikon Saurer Cabler)
Quantity: 6, Year: 2013, Model 05-0-C, 144 spindles, 500 gauge, POT diam 295mm, Alligator tensioners in Creel
Design / Version (Bauart): 8.02
2 drive motors per machine
AB46/310326D/TA-T/F/AR/
Volkmann VTS 05-0-C Twisting and Cabling (Oerlikon Saurer Cabler)
Quantity: 5, Year: 2010, Model 05-0-C, 144 spindles each, 500 gauge, POT diam 295mm, Alligator tensioners in creel
Design / Version (Bauart): 8.02
2 drive motors per machine
Machines are still on Mill Floor
AB74/300326E/SP-P/F/AO/
Volkmann CarpetTwister / CarpetCabler
Quantity: 1, Year: End of 2017, Type: VTS-05-0-F / VTS-05-0-C-F, Series: 8.02
Configuration
Number of spindles: 160, Number of sections: 20, Spindle gauge: 445 mm, Balloon limiters: without, High energy saving spindle E-260
Overall dimensions
Overall length: approx. 39.77 m, Overall width: approx. 1.50 m, Overall height: approx. 2.69 m
Technological data
Material: 100% PP, Range of counts: dtex 1200 – dtex 3800
Range of twist:Up-twisting: 40 – 710 t/m, Cabling: 20 – 355 t/m, Twist direction: S + Z
Untwisted yarn (feed packages)
Package type: cylindrical feed packages
Traverse: 10″ (254 mm), Tube length: 290 mm, Inside diameter of tube: 73 mm, Maximum outside diameter: 260 mm
Net yarn weight (approx., depending on yarn quality and package density): 5.0 kg
Twisted yarn (take-up)
Package type: cylindrical cross-wound bobbins
Traverse: 10″ (254 mm), Tube length: 290 mm, Inside diameter of tube: 73 mm
Maximum outside diameter (approx.): 350 mm
Main drive
Driven by two short-circuit squirrel-cage induction motors (one motor per machine side) with frequency inverter
Output: 2 × 37 kW, Voltage: 220/380 V, 3 phases, 50 cycles (to be confirmed in case of order)
Full motor capacity achievable if installation height does not exceed 1000 m above sea level and ambient temperature does not exceed 40°C
Electrical control
Electrical control located in the switch gear cabinet
Reversion of twist direction from S to Z manually
Drive connected via intermediate drive onto two main drive shafts, located in front of the spindles for easy access
Spindle speed controlled by frequency inverter
Terminal displaying spindle revolution, delivery speed, turns per metre and crossing angle
Spindle drive
Individual spindle drive by endless tape with 180° contact to spindle whirl, easily exchangeable
Tape tension released when spindle is stopped
No mechanical friction between tape and drive pulley due to air cushion
Gear section
One individual gear per side
Gear drive for adjusting: Turns per metre
Take-up tension (pre-take-up), Angle of crossing of take-up packages
Special cam-driven traverse motion for high-speed take-up, including anti-patterning device
Volkmann spindle (two-for-one and cabling spindle)
Maintenance-free spindle, rigidly fixed to spindle rail, with two yarn channels:
One for two-for-one twisting, One for direct cabling
Spindle rotor statically and dynamically balanced
Reserve discs with anti-wrap collar to avoid yarn wraps around the whirl in case of ends down
Stationary protection pot held by permanent magnets with tension device
Separators between individual spindles
Machine equipped with Volcojet
Machine without balloon limiters
Take-up
Adjustable pre-take-up per machine side to vary take-up tension and package density
Adjusting range: 60%, Traversing thread guides, self-threading, fixed on traverse rod
Drive of packages by friction rollers
Pivotable balloon thread guides with enclosed ceramic eyelet, height adjustable per section
Device for producing hard and soft packages
Cradle
Swivelling, spindleless four-bar cradle with special pressuring device to ensure uniform density throughout package diameter
Centering discs for take-up tubes, simple ball-and-socket type bearing, easily exchangeable for different tube dimensions
Machine colours
Textured paint, Principal colour: Light grey NCS S 0510-R90B
Secondary colours:Traffic grey B NCS S 7502-B, Red NCS S 1080-Y90R, Anthracite grey NCS S 8502-B
Note: Machine is professionally dismantled, packed and warehoused by Volkmann technicians. with energy reduction
AC86/270326/AQ
SAUER 160-spindle twisting machine, VOLKMANN VTS 08
170-spindle basket, 6 x 4.20 outlet, 6-inch feed.
AC29/220226E/ACS-AS/M/AS/
Volkmann VTS05 Twisting Cabling
Quantity: 2
One machine Year: 2011
2×80 = 160 spindles
Each Side has one motor
One machine Year: 2012
2×72= 144 spindles
Each Side has one motor
AA10/250226/
Rite Assembly Winder & Volkmann VTS 06 Twisting
1x RITE Assembly winder mod.ARD-L, Year: 2007, 24 heads, run 10″, autodoffing, creel 3 ends, possible up to 12 ends.
1x VOLKMANN 2×1 Twister mod.VTS.06.S, Year: 1997, 132 spindles (66×2), independent sides, feeding 270×56 mm, delivery 280x67x36 mm, central conveyor belt, air threading device.
AA03/170226E/CY-C/F/BY/
Volkmann VTS 06 S Two for One Twisting
Quantity: 1, Year: 1989, Type VTS-06-S, Bauart 4.60, 88 spindles, pot diameter 230mm, With extra height for feeding assembling cones until 12”, tubes length until 330mm, Delivery: 10“ traverse, cones 270-290 mm length, Airthreading Volcojet, conveyor for full cones in the middle of machine, Overhead cleaner, Motor 30kW, 380V/3Ph/50HZ, good condition.
AJ05/140226/AQ/
Hamel Saurer H 1000 pre Twister
Quantity: 1, Year: 1990, Model: H1000 pre twister, Spindles: N° 60, BTSR sensors on all spindles, Length: mt 15, Creel: on both sides, Nominal voltage: 400V, Nominal current: Max 106A, Made in Switzerland, Status: running
AJ05/140226/AQ/
Hamel Saurer ET 300 Twisting
Quantity: 1, Year: 2000, Model: ET 300, Elasto Twist, Spindles: N° 60, Creel: on the side, and above, N° 30 spindles with BTSR Feeder, Length: mt9, Nominal voltage: 400V, Inverter, Nominal current: Max 106A, Pot dia. 135mm, S/Z Twist Traverse 6″, Plastic cone: 56x170mm, Made in Switzerland, Status: running.
AJ05/140226/AQ/
Hamel Saurer ET 300 Twisting
Quantity: 1, Year: 2000, Model: ET 300, Elasto Twist , Spindles: N° 214, Length: mt26, Nominal voltage: 400V, Inverter, Nominal current: Max 106A, Pot dia. 135mm, S/Z Twist Traverse 6″, Plastic cone: 56x170mm, Made in Switzerland, Status: running.
AJ05/140226/AQ/
Hamel Saurer ET 300 Twisting
Quantity: 1, Year: 2000, Model: ET 300, Elasto Twist , Spindles: N° 214, Length: mt26, Nominal voltage: 400V, Inverter, Nominal current: Max 106A, Pot dia. 135mm, S/Z Twist Traverse 6″, Plastic cone: 56x170mm, Made in Switzerland, Status: running.
AJ05/140226/AQ/
Hamel Saurer ET 2020 Twisting
Quantity: 1, Year: 1988, Model: ET 2020, Elasto Twist, Spindles: N° 214, Creel: above, Length: mt26, Nominal voltage: 400V, Inverter, Nominal current: Max 106A, Pot dia. 135mm, S/Z Twist Traverse 6″, Plastic cone: 56x170mm, Made in Switzerland, Status: running.
AJ05/140226/AQ/
Hamel Saurer ET 2020 Twisting
Quantity: 1, Year: 1988, Model: ET 2020, Elasto Twist, Spindles: N° 142, Creel: one on the side, one above, Length: mt19, Nominal voltage: 400V, Inverter, Nominal current: Max 106A, Pot dia. 135mm, S/Z Twist Traverse 6″, Plastic cone: 56x170mm, Made in Switzerland, Status: running.
AJ05/140226/AQ/
Hamel Saurer ET 2020 Twisting
Quantity: 1, Year: 1988, Model: ET 2020, Elasto Twist, Spindles: N° 154, Creel: one on the side, one above, Length: mt21, Nominal voltage: 400V, Inverter, Nominal current: Max 106A, Pot dia. 135mm, S/Z Twist Traverse 6″, Plastic cone: 56x170mm, Made in Switzerland, Status: running.
AB46/281225/
Swisstex Filament Yarn Technologies
Quantity: 1, Year: 2011 , Model CDDT 20-V3, 144 spindles, 500 gauge, (Made in France), Machine Type – CDDT20-V3, Alligator tensioners in creel, Electrical Diagram No : 100474B00, Power Supply: 3 Phase, Voltage: 480 V, Frequency: 60 Hz, Rated Current: 230, Air Pressure: 5 bar, Air Consumption: 1 m³/hour.
AA03/040226E/RA-R/M/BY/
Volkmann Two For one Twister VTS-05
Quantity: 2, Year: 1989/1990, 120 spindles, each side independent, with own gears and motor 45kW, 380V/3Ph/50Hz, feeding 10” assembling bobbins, Volcojet air threading, delivery 10” cylindrical tubes tubes, conical tubes also possible,
AA03/310126E/AA-R/F/
Volkmann VTS08-4.11 Twisters
Quantity: 2, Year: 1991, 168 spindles each, Assembling cones 6-7″, pot día. 157 mm., delivery 6″, conicity 4°20′, yarnbreak control, Volcojet threading.
AA03/310126E/AS-R/F/
Volkmann VTS08-6.10 Twisters
Quantity: 3, Year: 1999, 160 spindles each, Assembling cones 6-7″, pot dia. 157 mm., delivery 6″, conicity 4°20′, yarnbreak control, Volcojet threading.
AH27/140425D/CS-C/F/
Saurer Volkmann TFO VTS-10-0
Quantity: 25
Year: 2023, new one, never fitted, 200 positions each, pot dia. 137×170 mm.
Machine Origin : Made in Saurer
Main drive KW usage: 30 KW
Main Drive with frequency converter exist or not: WITH FREQUENCY
Twisting Drive with frequency converter exist or not: WITH SERVO
What Voltage and Hertz are used: 380 V 50 Hz
Computer display exist or not Parameters: WITH TOUCH SCREEN
Spindles gauge: 207
No. of sections: 10
No. of spindles per sections: 20
Total No. of spindles: 200
Feed package type: 126 mm
Feeding empty tube dimensions: 38/44/170
Take up package type: taper type
Take up empty tube dimensions length, diameter, (4’20/5’57): Can be configured according to the situation.
Baloon limiter exist or not: NOT
Usable yarn count range: 20-200
Spindle speed range: 1000-12000
Twist range: 80-2600
Paraffin waxes exist or not? NOT
Machine length: 24100 mm
Machine Width: 600 mm
Machine Weight: 4800 Kg / 5800 Kg
bobbin holder movement is pneumatic
Machines are Volkmann China not Volkmann Germany
AA10/190126E/OS-Y/F/AQ/
Volkmann VTS 05-C Double Twisting (2×1) /Cabling
Quantity: 1, Year: 2012, mod. 05-0 type 8.02, 40 heads (20×2), feeding 10″, free ballon, can dia.350 mm., delivery 10″, pneumatic doffing and air threading device. Machine running.
AB46/281225/
Saurer Volkmann 05-0-C-F Twisting
Quantity: 2, Year: 2018, Type: 05-0-C-F, Design / Version (Bauart): 8.05.
AG41/241225/BT/
Volkmann Compact Twister VTS 07
Quantity: 1, Year: 2013, Spindles: 162, Guage: 230mm, Delivery 4’20, Area Needed(m): 22.5L*1W +2m Each side, Average production: 900 Kg, 10Nm-85Nm. double feeding, Intake small cone, Output 4”20. Twin pack, Feeding with 2 4’2 cone, Deliver 1 twisted. It can twist cotton yarn, spun and viscose or any type of yarn except the continuous filament yarn.
Machines are in production, in perfect condition.
AA05/191225/
Volkmann 2×1 Twisting VTS-06S
Quantity: 1, Year: 1996, Type 4.21, 80 positions, Pot día 230 mm., 8″ feeding, 6″ delivery, 5°57′ conicity.
AA03/181225E/AS-Y/F/
Volkmann VTS-07 Twistings
Quantity: 3, Year: 1996, Two for one twister, Bauart 5.10, General overhauled in 2018, 144 spindles, Feeding: assembling bobbins 6-7”, tubes length until 205 mm, Diameter until 175 mm, pot diameter 185 mm, Delivery: conical and cylindrical tubes, length 170mm, 6” traverse, diameter until 350 mm, 2-3 kg, bobbin lift by yarn break, air threading Volcojet, waxing device, spindle speed 2.600-5.500 tpm. Very good condition, machines have run only few years in 2 shifts, still running. MACHINES ARE PARTIALLY IN PRODUCTION.
AA03/181225E/AS-R/F/
Two For One Twister Volkmann VTS-06-S
Quantity: 1, Year: 1983, Bauart 4.60
8o spindles, feeding: assembling cones 8-12”,
delivery: 10“ traverse, cones 270-290 mm length,
airthreading Volcojet, conveyor for full cones in the middle of machine,
motor 30kW, 380V/3Ph/50HZ, good condition
AI73/141225E/CA.L-A.L/M/AS/
Volkmann 07 Twisting
Quantity: 1, Year: 2001, 6 inch output, 208 spindle, no malfunction.
AH54/081225D/AIL-L/M/DU/
Volkmann CC-Carpet Cablers/Carpet Twister 05-0-C
Quantity: 14, Year: 6×2012 – 8×2013, Type: 05-0-C, Spindles: 13×160 – 1×120, Capacity in ton @ 2000 dtex and 85 tpm: 13×4.4 – 1×3.3, POT diameters for these twisters is 298 mm.
The electrical/mechanical parts like motors , gears , shafts , bearing , roller , etc are all working.
Those machines need to replace the pneumatic systems inside , 3/2 valve , central valve , pneumatic pipe, etc.
Stopped on Mill Floor.
AA10/051225/
Twisting Unit
Including:
1x SSM assembly winder Year 2005 Type PSD 6 D, 60 spindles, 2-end assembly.
1x SSM assembly winder Year 2005 Type PSD 6 D, 40 spindles, 2-ply assembly.
5x VOLKMAN 2 x 1 Twisters, type VTS07 Year 2007, 192 spindles each, feeding 10″ or 2 x 5, Output 6″ cylindrical or conical.
AI95/031225/CL/
Volkmann VTS 07 Twisting
Quantity: 3
Volkmann VTS 07 Twisting
Suitable to make soft packages by increasing the overfeeding speed and by threading the yarn.
AI95/031225D/YP-AL/M/CL/
1x Year: 2014, 198 SPINDLES.
AI95/031225D/RT.L-AI/M/CL/
1x Year: 2008, 176 SPINDLES.
AI95/031225D/CA-O/M/CL/
1x Year: 2003, 176 SPINDLES.
AA08/021225/
Volkmann VTS 07 Double (2×1) Twisting
Quantity: 1, Year: 2000, Bauart 5.70, n.176 spindles, Feeding 8″ (200 mm) from assembly winder, Maximum feed bobbin diameter 178 mm, Exit 6″ (152 mm) – conicity 4°20′, Waxing device, Pneumatic threading, Yarn reserve – soft bobbin return, Single-control spindle speed- inverter, Dual-control twist adjustment, Inverter for spindle speed adjustment, Magitex.
AA08/021225/
Volkmann VTS 07 Double (2×1) Twisting
Quantity: 1, Year: 1998, Bauart 5.60, 160 spindles, Feeding 2×6″ with daisy device and 8″ (200 mm) from assembly winder, Maximum feed bobbin diameter 178 mm, Exit 6″ (152 mm) – conicity 4°20′, Waxing device, Pneumatic threading, Yarn reserve – soft bobbin return, Single-control spindle speed- inverter, Dual-control twist adjustment, Magitex.
AE02/201125E/RR.L-A.L/M/
Volkmann Saurer Compact Twister VTS07
Quantity: 3 , Year: 2007, mod. 6.10, 192 positions
AH67/011125E/LS-Y/F/AY/
Volkmann TFO VTS-07 Trend Twister
Quantity: 1
Year: 2000
Double twist twister for spun yarn
192 spindles (8+8 spindles per section)
Informator for programming work data
Dual control (allows different twisting and speed on each side)
Possibility of dividing the machine into three groups on each side of the machine, which allows working up to three twists and three different speeds on each side of the fan.
Yarn guide movement is common by each side of the machine
1 individual rotating motor in each spindle
Start/stop button on each spindle
Electronic sensor/yarn presence probe w/ automatic spindle stop in case of breakage
Pneumatic yarn feeding
Fedding bobbin up to 10″ coming from assembly winder
Device for forming of soft packages, if desired for dyeing
Output pachages of 6 inches (152mm of wire winding)
Possibility of forming conical bobbins 4º 20; 5°57, or cylindrical bobbins as desire
Lateral reserve of yarn for weaving preparation
Automatic package lifting with blockage aplet
Top creedle with supports for empty cones or full packages
MAGITEX traveling blower with box for centralized discharge with timer
Longitudinal tape with micros for emergency stop of the machine in case of need
Inverter speed drives for electronic introduction of torsion and spindle speed
RPM 9,000 (18,000 double twist)
Minimum TPM 80
In excellent maintnance condition and functioning.
Machine lengths 21940mm
Voltage 380v.3c.50hz.
NOTE; Machine professionally dismantled, and moved to warehouse.
AA98/291025E/LR-Y/F/BG/
Double Twisting (2×1) Frame VOLKMANN VTS 06-S
Quantity: 1, Year: 1997, with Nº 120 spindles , double side ( 60 each frame x 2 ) , single drive , feeding 10″ inch from assembly winder bobbins , tube length 270 mm. ,basket diam. 235 mm. ,
delivery on cones 10 ’’ ( traverse 250mm. ) , cones length 270 mm. ,pneumatic thread-in volcojet , inverter to speed set , Machine complete in good running condition
AC29/281025/AS/
Complete BCF Line with Cabling & Heat Setting (VERY HIGH QUALITY)
Year: All machines 2012
Can be sold as a complete line or separately
Neumag S plus model 2012 (QUALITY IS SAME AS 2019-2020)
Mono PP and Polyamid
2 extruders/ 6 winders
One extruder for 2 winders and one for 4 winders
In excellent condition
15 tons per day
Note:
PA, Nylon Production details
spinnerets for BCF Neumag 69 and 200 for PA, Polyamide
number of spinnerets 2 set
winder speed around3000 meter /min
For PA, Polyamide, factory is manufacturing 1000 dtex yarn, approx 8 tons/day
For 900 dtex around 7,5 ton
1600 dtex around 300 tons per month
PP yarn Production details
For PP, production is 15 tons per day at 2000 dtex
And 7.5 tons at 1000 dtex
Spinnerets 140 filament and 420
4x Volkmann Twisting and Cabling VTS 05-C
160 spindles each
2x Heatset machines Superba TVP3
60 spindles each
Running in perfect conditions
AA98/201025E/TC-Y/F/BG/
Double Twisting (2×1) Frame VOLKMANN VTS 06-S.5
Quantity: 1, Year: 2001, with Nº 120 spindles , double side ( 60 each frame x 2 ) , single drive ,
feeding 10″ inch from assembly winder bobbins , tube length 270 mm. ,
basket diam. 235 mm. , delivery on cones 10 ’’ ( traverse 250mm. ) , cones length 270 mm. ,
pneumatic thread-in volcojet , inverter to speed set , Machine complete in good running condition ;
AD65/211025E/YP-R/C/
Volkmann 2×1 Twister VTS05
Quantity: 2, Year: 1989/1990, 120 spindles each, Feeding & delivery 10″, Tubes 280mm, Gears for different turns/m each side, Each machine fit 2 container.
AA10/201025E/CS-Y/M/
VOLKMANN 2×1 Twister VTS-06S & OMM Precision Assembly winder
VOLKMANN 2×1 Twister
Quantity: 1, Year: 1985, mod.VTS-06S , 40 spindles (20×2), feeding tube 285 mm. x dia.70 mm., can dia.225 mm., gauge 320 mm., output tube 280 mm 4°20, pneumatic air threading device.
OMM Precision Assembly winder
Quantity: 1, Year: 2009, mod.D06 BPN, 6 heads, independent heads, (4) tube 10″ and (2) tube 8″, lateral creel, 6 ends
AC09/141025E/YR-R/F/BG/
Volkmann VTS 05 Two For One Twister
Quantity: 1, Year: 1985, No of Spindle: 96, Pot Dia in mm: 290, Traverse in Inch: 10, Spindle Pitch in mm: 355, Motor kW: 37, Delivery Package: Cheese, Conicity: Cylindrical, Outer Pot: Available, Spindle Drive: Tangential, Stopped.
AA10/131025E/RS-Y/M/
Volkmann VTS05 2×1 Twister
Quantity: 1, Year: 1986, Type VTS-05, 96 Spindles, Exit cone 10” – 3°30.Note: The machine is complete with software
AA10/061025/
Oerlikon Saurer Double Twisting 2×1 Frame
Quantity: 1, Year: 2012, mod. 05-0, type 8.02 , 40 heads (20×2), feeding 10″, free ballon, can dia.350 mm., delivery 10″, pneumatic air threading device, pneumatic doffing.
AF45/300925E/PR-Y/C/
Saurer Carpet Cabler
Quantity: 1, Year : 2015 / Start up 2016, Type 05-0-C
Machine ihas less workinghours and is like new, Type 8.02, Number of spindles: 40
Output: 10“ (254mm) cylindric, max diameter 400mm, spindelpotdiameter 285mm, spindelpot high 300mm, Fabrics: Acryl, glass fibers, copper