Quantity: 1, Year: 2012, Mono PP , 2 extruders/ 4 positions, 3 ends each, Capacity, 10 tons per day, Dozing: Dodeco 2012 model, Gravimetric, Machine is in production, Very good condition,

Quantity: 2, Year: 2003, 2x 3 positions, 3color 3end or 3x mono color.
3 color 3 end or 3x mono color (cfr Variomelt) Variomelt for Tricolour Production
Total 27 Ends, BCF POLYESTER,
Output per Module 2.8 a 8 Ton pro Day
Output per Module 1000 datex 2.8 ton pro day there are 3 modules
Output per Module 3000 Datex 8 ton pro day per Module

Variomelt is a tricolour BCF plant equipped with a melt flow changing device. It offers the flexibility of producing tricolour or three different coloured monocolour BCF yarn products.
The Variomelt system is integrated in the spinning beam.
With Variomelt the plant can be converted from tricolour to monocolour mode.
The close connection of the extruders to the spinning beam guarantees the shortest possible product lines and the lowest possible flushing losses during product change.
In combination with one extruder per position, it is attractive for small lots of mono colour yarns because the running times of the lots are increased, therefore the flushing losses during colour change are reduced by 2/3rds.
Cam Rolls for Tricolour Production The cam roll is located in the infeed section of the machine, between the F-Jet and inlet godets. The cam roll is used in a three-colour machine to mix the 3 different yarn ends with each other.
The frequency of the mixing is adjustable while the cam roll motor speed can be changed. The cam roll ensures a very even mixing effect for a uniform looking carpet where the colours do change in a certain pattern. It is an important parameter for the even appearance of your carpet.

Quantity: 1, Year: 2014, polypropylene and Pet, 4 Position, 2 extruders, 3 bobins winder,
Air Cleaner, Piovan, Doteco dosing system, 10 tons per day, Good working Condition

Quantity: 1 , Year: 2007, Tri color, polypropylene, 3 Position, 3 extruders, 3 bobins winder, Doteco dosing system, 6 tons per day, Good working Condition

Quantity: 1, Year: 2011, 4 Position, Mono color, polypropylene, 2 extruders, 3 Bobbins winders, Doteco dosing System, 10 tons, Working Condition

Quantity: 1, Year: 2017, Tri color, For porypylene and Polyester, 6 position, 6 extruders, 3 Bobbins winder , Doteco dosing system, 15 tons, Moretto cristalizator and dryer system for PET, Stopped but ready for run

Quantity: 1, Year: 2012, Tri color, polypropylene, 3 Position, 3 extruders, 3 bobbins winder, Doteco dosing system, 7.5 tons, Working Condition

A: STRALINGER – model Santex 1000 – Year: 2001
Winder SAHM of YOC 1995 for 214 positions
Packages 260 mm long max dia 300 mm (inner dia 90mm)
Composed of : feeder; additives supply (4 different components) extruder, oven, godgets 5 pcs; fibrilizator; godgets – rollers 2 at end Max speed 300 m/, in for PP ; 240 m/min for PE, Output – 450 khs/h for PP.
Complete , running , mill floor.

B: KM WARPERS, HEADSTOCK, WORKING WIDTH 3800mm, Year: 1998
Composed of:
Direct warper KM – model ZM -1 wwwidth 1800 nn flange dioa 1000mm with creel for 400 pos.
Assembly warper KM modelk Rotal with stand for 8 warper beams and headstock of 4200 mm ( was working 3600 mm lemgth of beam warp) and dia 1000, Complete, just being stopped , mill floor.

Working STAREX and Warpers preparing warp beams with PP tape for weaving looms.

Quantity: 8, Year: 2012-2013, Type: FK6, 240 spindle, 3 yarn path, 4 roller, just stopped.