AB45/080526/
RIETER Open End R 40
Quantity: 3, Year: 2003, 420 rotors, , rotor 33 and 40 mm, , USTER QUANTUM 2 clearers, opening rollers B 174 DN, , waxing, , 4 robots, Condition: Running
AB45/070526/
Saurer ACO 480 Open End
Quantity: 1, Year: 2010, 408 rotors, rotor 36 mm, face plate OS21 DN, waxing, 4 robots, Condition: Running
AA10/060526/
Suessen Spinning Frames
Quantity: 1, Year: 1994, mod.PARAFIL 2000, 120 spindles, Take up 8″.
AA10/060526E/CP-R/M/
Suessen Spinning Frames
Quantity: 4, Year: 2003/2004, Type PARAFIL 2000
40 spindles each, SUESSEN drafting, hollow spindles, fancy yarns, Delivery bobbins, traverse 150 mm, with a SUESSEN cops winder, 2 x 6 spindles
AB09/050526E/CCO-AC/M/
Muratec Vortex VOSIII 870 Spinning Machines
Quantity: 2, Year: 2013, Type VOSIII 870, Max Spinning Speed : 500 m/min (Max.)
Yarn Count Range : Ne15–Ne60 (39 tex–10 tex), Fiber Length : 38 mm (Max.), Unit Pitch : 235 mm, Traverse : 6″, Max Package : Ø300 mm / 3.2 kg (Parallel), Installed Power (96 Units) : 27.5 kW, Compressed Air : 0.60 MPa; Approx. 80 L/min per nozzle @ 0.5 MPa, Key Features : VOS III, MSC Yarn Clearer, Auto Doffer, Splicer Carriage, Package Conveyor, Condition : very good.
AA02/040526D/AIL-L/M/
Rieter Draw Frames
Quantity: 11 , Model RSB D-30, With Servo motors, 18 x 48” Can, Power Creel, Auto Leveller, 4 over 3 Drafting, Single Delivery, Auto Can Changers, Central Suction
AA02/040526D/YYA-CA/M/
Truetzschler Cards
Quantity: 29, Year: 1999, Type DK 903, 3 Position Automatic Can Changer, 40 x 60 Can Size with castors, Aluminum Flats, Triple Licker In
AA02/040526D/APS-S/M/
Zinser 670 BIG-PAC Roving Frames
Quantity: 4, Year: 2006, Model FL.670 – BIG PAC, 120 Spindles, 20 x 7 packages – 4 Kg, Auto Doffing, 18,000 ROVING BOBBINS, 20 X 7
AB88/300426/
RIETER R923 Open End
Quantity: 2, Year: 2011, 400 Positions, Opening rollers C40 DN, Rotor 34 mm, Navel Spiral CR7 CS, Delivery 6” cylindrical, Inverter
AJ09/300426D/CPL-CI/F/BA
Rieter R37:
Quantity: 4, Year 2022
500 rotors
2 mechanical robots
Rotor T34, Roller OK40
Fully automatic
AJ09/300426/BA
Saurer BD480:
Year 2019
480 rotors one set, 416 rotors one set
Yarn lifting
Yarn clearer corolab Q
Rotor T34, Navel 36 cuts ceramic, Roller OK40
Joint spinning
AB45/290426E/TY-Y/M/
Muratec Vortex III 870, Very High Quality
Quantity: 1, Year: 2014, 32 spindles, 380 V.
Polymaster system;
Traverse 6”, Splicer, No 02 splicer 87C, Doffer, Clearer Type MSF-F, Feed can size 18” and 20”, Waxing, blower, 380 V 50 HZ
AI08/290426D/TA.L-Y/F/BA/
PB31 Combers
Quantity: 10(in warehouse since 6 months, machines would be cleaned and rechecked and tested running before shipment)
AB88/280426/
TRUTSCHLER TC07 Carding Machine
Quantity: 3, Year:2011, Chute Feed, Auto Leveller, Auto Can Changer, Can Size 40”
AB46/220426/BJ/
Rieter K44 Ring Frame link with Winder
Quantity: 15, Year: 2005, No of Spindles : 864, Spindle gauge: 70mm, Drafting type: P3-1(COM4), Ring Dia : 38mm, Spindle wharve: 18.5mm, No of creel : 5, OHTC : Sohler.
AB46/220426/BJ/
Rieter G33 Ring Frame link with Winder
Quantity: 25, Year: 16×2007-9×2005, No of Spindles : 1200 & 864, Spindle gauge: 70mm, With Doffer, Ring Dia : 42mm, Spindle wharve: 18.5mm, No of creel : 5, OHTC : Sohler.
AB46/220426/BJ/
Rieter Ringframe G5/2
Quantity: 6, Model: G5/2, No of Spindles : 864, Spindle gauge: 70mm, Ring Dia : 38mm, Spindle wharve: 18.5mm
AF74/180426/AS/
16 x Trutzschler DK803 cards, Year 1997
DFK chutes, KH950/1000 manuel coiler, Can size 1000 x 1200mm
Triple linkerin, Intermitted suction
AB45/160426/AQ/
Bonino Cards
Bonino Cards CC150/70
Quantity: 5, Year: 1990, Working whidt 1.000 mm, chute feed Trutzschler Model 533
automatic can changer MEC for 40” x 48”, 380 V 50 Hz, Delivery: June 2022, Condition: Running
Machines in warehouse
AB45/160426/AG/BY
Muratec Vortex 861 Air Jet Spinning
6 sets Muratec Vortex 861 Air Jet Spinning
Year 2005/2006
80 spindles each
Exit 6″ cylindrical
Clearers MSC-F
2 Splicers G2Z 86-C each machine
1 doffer 86- D each machine
With waxing
With Blower
Condition:Running
AI46/140426/DS/
Rieter Plant, HIGH QUALITY
FOR SALE AS COMPLETE LINE OR IN GROUPS/LOTS.
Quantity 1: Bale opener UNIfloc A11, Year of make: 2008, Brand: Rieter, Origin: Switzerland
Quantity 1: Waste opener B25, Year of make: 2008, Brand: Rieter, Origin: Switzerland
Quantity 1: Coarse cleaner UNIclean B12, Year of make: 2008, Brand: Rieter, Origin: Switzerland
Quantity 1: Cleaner, UNImix B71, Year of make: 2008, Brand: Rieter, Origin: Switzerland
Quantity 1: Fine cleaner UNIflex B60, Year of make: 2008, Brand: Rieter, Origin: Switzerland
Quantity 1: The Vizion Shield «Direct MPIX», Year of make: 2008, Brand: Rieter, Quantity: 1, Origin: Switzerland
Quantity 1: Condenser, A 21, Year of make: 2008, Brand: Rieter, Origin: Switzerland
Quantity 1: Power bunker, Year of make: 2008, Brand: Rieter, Origin: Switzerland
Quantity 1: Exhaust fan, Year of make: 2008, Brand: Rieter, Origin: Switzerland
Quantity 1: Fiber transport fan, Year of make: 2008, Brand: Rieter, Origin: Switzerland
Quantity 1: Dust extractor 300/220 mm, Year of make: 2008, Brand: Rieter, Origin: Switzerland
Quantity 1: Solid matter extractor 300 mm, Year of make: 2008, Brand: Rieter, Origin: Switzerland
Quantity 1: Infrared spark detector, 300mm, including electric control, Year of make: 2008, Brand: Rieter, Origin: Switzerland
Quantity 1: Metal Detector with electronic sensor and control device (Speedsense) 300mm, Year of make: 2008, Brand: Rieter, Origin: Switzerland
=========
Quantity 5: Carding machine, C60, Year of make: 2008, Brand: Rieter, Origin: Switzerland
Quantity 2: Carding machine, C60, Year of make: 2011, Brand: Rieter, Origin: Switzerland
=========
Quantity 2: Drawframe SB-D40, Year of make: 2008, Brand: Rieter, Origin: Switzerland
Quantity 2: Drawframe SB-D45, Year of make: 2011, Brand: Rieter, Origin: Switzerland
Quantity 2: Drawframe RSB-D40, Year of make: 2008, Brand: Rieter, Origin: Switzerland
Quantity 2: Drawframe RSB-D45, Year of make: 2011, Brand: Rieter, Origin: Switzerland
=========
Quantity 6: Roving frame TJFA 458A, Year of make: 2008, Brand: Jingwei Textile Machinery Co., LTD., Origin: P.R. of China
Quantity 36: Ring Spinning frame FA506, Year of make: 2008, Brand: Jingwei Textile Machinery Co., LTD., Origin: P.R. of China
=========
Quantity 4: Savio Automatic Winder mod. Polar/M with 64 heads, Year of make: 2008, Brand: Savio, Origin: Italy
Quantity 1: Savio Automatic Winder mod. Polar/M with 72 heads, Year of make: 2011, Brand: Savio, Origin: Italy
Quantity 1: Savio Automatic Winder mod. Polar/M with 64 heads, Year of make: 2021, Brand: Savio, Origin: Italy
=========
AB46/100426/
Open end Machines Schlafhorst Autocoro 480 (2011)
192 Spindles | Corolab XQ
2 Piecers | 33mm Rotor | B174DN
AB46/100426/
Rieter Open end R40
Quantity: 2, Year: 2005, Each comprising:, 280 rotors each, 2 piecers, Uster Qutntum 2 clearers, Rotor 36mm, Combing roller B174DN, Spiral navel, waxing
AE30/090426/BA/
1 X Rieter A11 unifloc 2002 year
1 X Rieter B12 2015 year
1 X Rieter unicontrol
1 X Rieter B33 2011 year
1 X Rieter B76 2011 year
1 X Rieter B17 2011 year
1 X Rieter A79 2011 year
1 X Uster jossi 2012 year
12 X Rieter carding machine
Model: C60
Year 2011
With SB-MODUL 2
Coiler 1000*1200mm
Auto leveler
Single lickerin
Voltage / freq 380/50
Stopped on mill floor
8 X RIETER OPEN END
MODEL: R60
2011 YEAR
400 ROTORS
4 piecers
31mm rotor
OB20B combing roll
Uster Quantum 2 yarn clearer
380V 50HZ
Stopped on mill floor
AE30/090426D/AIS-S/F/BA/
8 X RIETER OPEN END MODEL: R60
2011 YEAR
400 ROTORS
4 piecers
31mm rotor
OB20B combing roll
Uster Quantum 2 yarn clearer
380V 50HZ
Stopped on mill floor
AE30/090426/BA/
12 X Rieter carding machine
Model: C60
Year 2011
With SB-MODUL 2
Coiler 1000*1200mm
Auto leveler
Single lickerin
Voltage / freq 380/50
Stopped on mill floor
AB46/060426/
Rieter Carding C70L, C70, C60
2x Rieter Model : C70L
Year : 2017 & 2018
Chute feed : C70L
Can dia : 40”X47”, Waste collection : Continous/Upwards
No of lickerin : 1, Stationary flat front: 2, Stationary flat back : 4
5x Rieter C70 Cards
Years 2011, 2012, 2015
Single Licker-in system
Delivery Can Size: 1000 mm x 1200 mm, Linear can changer; recessed in floor
17x Rieter C60 Cards
Year : 2005 & 2007
Chute feed : C60HS, Can dia : 40”
Waste collection : Continous/Upwards
No of lickerin : 1
Stationary flat front: 2, Stationary flat back : 4
2x Rieter C60 Cards (Year 2011)
Triple Licker-in system
Delivery Can Size: 1000 mm x 1200 mm
AC32/040426/BC/
Murata Vortex MVS861
Quantity: 2
Year: 2010
80 spindles, with Polymaster
Spindle Type: 1.2, No of Splicer : 3 pcs/set, With OHTC
AJ09/030426D/LAC-RI/F/BA
Saurer Autocoro 9:
Year 2018
480 rotors
4 mechanical robots
Yarn clearer corolab XQ
Rotor G628BD/36, Navel KSS-A, Roller B174DN, Insert plate A28SL
Available for 3 different types of yarn
AB45/010426/BY/
RIETER CARDS C51 HI-PER-CARD
Quantity: 30, Year 1999 – 2000-2001, Automatic Can Change, Exit Can 40″x42″, Chute Feed A70, 1 Lickerin, 380 V 50 HZ, Condition: Running
AA02/010426/BY/
Complete Saurer Schlafhorst Open End Spinning Plant with 1728 Rotors
This factory is currently running , spinning all cotton, both recycled and virgin cotton.
Production offered:
100% Cotton OE Yarn Virgin Cotton Ne 6/1 – 30/1.
100% Cotton OE Yarn recycled Blend Ne 3.5/1 – 8.5/1.
Polyester/cotton 50/50%, 65/35% + 35/65% Ne 6/1
COTTON BLOWROOMS:
Bale Opener BO-A Blendomat , 2017
Multi function separator SP-MF, 2017
Condenser – Feeder BR-COI, 2012
Cotton Cleanere CLP, 2012
Fan Tv425
Multimixer 8 chamber MPM8
Condenser – Feeder BR-COI, 2012
Opener FD-T 1600, 2012
Cleaner CLC3, 2012
2-way distributor BR 2W, 2017
LINE-A:
Condenser feeder BR-COI, 2017
Opener FDS, 2017
Foreign particle separator Ts-T5, 2017
Fan BR-FD425, 2017
2 way distributor BR 2W , 2017
Condenser feeder BR-COI, 2017
Fine Opener FDS , 2017
Foreign particle separator SP-FPU
LINE-B:
Automatic bale opener BDT 019
Condenser feeder BR-COI, 2017
Condener LVSA
Condenser LVSA
Bale OPener , 2 chambers BOAL
Metal detector SCFB
Multimixer 6 chambers MX-U6, 2017
Securomat Foreign particle separator , SCFO(SP-F)
Fan, TV425
Air Separator BR-ASI, 2017
Recycling separator ASTA
Condenser LVSA
Pre- cleaner BEW
2 Roller cleaner WST2
POLYESTER LINE:
Bale Opener BDT019
Waste Opener SAS (BO-R)
Condenser LVSA
Bale Opener BOA
Opener TFV1
2 way distributor BR 2W, 2017
Condenser feeder BR-COI, 2017
Fine Opener FDS , 2017
Opener Feeder BL-HF, 2017
Weigh Pan BL-WP, 2017
Opener Feeder BL-HF, 2017
Weigh Pan BL-WP, 2017
Tuft blender BL-TO, 2017
2 way distributor BR-2W, 2017
Line 1:
Multi mixer , 10 chambers, MX-U10 , 2017
Condenser feeder BR-COI, 2017
Fine Opener FDS , 2017
Fan TV425, 2017
Air Separator, BR-ASI, 2017
Line 2:
Multi mixer , 10 chambers, MX-U10 , 2017
Condenser feeder BR-COI, 2017
Fine Opener FDS , 2017
Fan TV425, 2017
Air Separator, BR-ASI, 2017
Portal Bale Opener BOP, 2017
Fan BR-F500, 2017
Line 3:
Pre-mixer support table BO-E , 2017
Condenser feeder BR-COI, 2017
Opener TO-T1
Foreign particle separator , SP-FPU
Waste presses
CARDS & INTEGRAL DRAW FRAMES:
3x Trutzschler TC11 IDF-R Cards, 2013/17
Integral Draw Frames
Can changers
8x Trutzschler TC15 IDF-2R Cards, 2017
Integral Draw Frames
Can changers
Rectangular cans , contents approx. 23kg each
OPEN END SPINNING FRAMES:
3x SAURER SCHLAFHORST OPEN END SPINNING FRAMES, Type ACO-9, 216 rotors, 1 Doffer cleaning unit per side , 2018
1x SAURER SCHLAFHORST OPEN END SPINNING FRAME, Type ACO-8, 216 rotors, 2 Doffer cleaning units per side, 2012
4x SAURER SCHLAFHORST OPEN END SPINNING FRAMES, Type ACO-8, 216 rotors, 1 Doffer cleaning unit per side, 2014/15
2x SCHLAFHORST OPEN END SPINNING FRAMES, Type ACO 288 with SE11 Spinboxes, 1 Doffer cleaning unit per side, 1997/2001
Waste presses
Overhead package transfer system to packing area.
Engineers for supervision of installation available.
Line is in production.
AB46/260326/
Trutzschler, Carding TC11, TC07, DK803, DK760
2x Model:TC11, Year:2015 (Germany)
5x Model – TC 07, Year 2015 & 2011
DFK 1200 Chute Feed , 24 x 48 can size , 3 lickerin
Can process cotton and cotton blends T-con
480 Volts , 60 Hz
28x Model : DK 803 (Germany)
Year of Manufacture: 1999
Dfk feeder can diam. 1000mm. Coiler kh 950
Can capacity: 3 cans– 1 empty can, 1 full can, 1 can running.
All have their can charger
3x Model: DK 760 (Germany)
Year of Manufacture: 1994
AB45/250326/BY/
TRUTZSCHLER DK803 CARD, TC03, TC07
AB45/250326E/AC-C/F/BY/
TRUTZSCHLER DK 803 CARD
Quantity: 1, Year: 1996
With CFD and CCD autoleveller, automatic exit can 1.000 mm x 1200mm ( 40” x 48”)
Trutzschler Chute feed, alluminium flat, Webfeed (3 lickerin system), Electronic Baumuller
380 V 50 HZ
AB45/250326E/CY-C/F/BY/
TRUTZSCHLER TC 03 CARD
Quantity: 1, Year: 2003, automatic exit can 1000 mmx 1200 mm ( 40"x48"), Trutzschler Chute feed, alluminium flat, M1 Licker in
380 V 50 HZ
AB45/250326E/RP-L/F/BY/
TRUTZSCHLER TC 07 CARD
Quantity: 1, Year: 2009, automatic exit can 1000 mmx 1200 mm ( 40″x48″), Trutzschler Chute feed,alluminium flat, 1 Licker in
380 V 50 HZ.
AA05/240326D/COI-CI/F/BA
2 x NSC Schlumberger combers mod. ERA
year 2004, ball feeding, can delivery día. 1000×1200 mm.
2 machines require 1×40′ ctr for shipment
AA05/240326D/RO.L-AI/C/BA
8 x Sant’Andrea combers mod. P100, year 2002,
4 x delivery 700 x 1000 mm.
4 x delivery 1000 x 1200 mm.
4 combers fit in 1×40′
AG52/180326/BS/
Toyota RX240 Ring Spinning Frames LINKED to autoconer
08 x Toyota RX240 Ring Spinning Frames
1104 spindles each – ring Ø 40 mm – gauge 70 mm – year 2000
Equipped with Magitex blower cleaning system
linked with :
08 x Murata 7V-II Cone Winders
24 spindles each – year 2003
Equipped with Uster Quantum 2 yarn clearers (CV 4°20′)
With Magicfil blower cleaning system
01 x Marzoli FT1D Speed Frame (Simplex)
120 spindles – configuration 6 x 16 – year 2002
The machines are currently stopped, but complete and ready to be put back into operation.
AH27/160326D/RR-L/F/BA
Rieter C60
10 sets rieter C60, can show empty run
Year : 2012 , can size is 1×1.1m , single linkerin
2 machine /40HQ
AB46/120326D/L.L-A.L/BJ
Breaker Draw frame
2 X Breaker Draw frame:
Make: Rieter
Model: SB D15
Year : 2005
Can size: 40”x45”
Cree Type: Power
No of doublings: 6
Feed can dia: 40”
Suction: Individual
Drafting Type: 4 over 3
AB45/120326/
Rieter G33 Ring Spinning
Quantity: 2, Year: 2000, Model G33 , 1200 spindles, automatic doffing, Gauge mm 70, Ring diameter 42 mm Bobbin Length mm 220, Drafting Rieter Type P3-1, Cradle Size in mm Short – 36, Blower Electrojet, 440V 60 HZ, Condition: Erected till middle of January 22, They are not COMPACT. Condition: Dismantled.
AA02/110326/AN/
Trutzschler Carding & Saurer Open End Machines
3x TRUETZSCHLER CARDS Type TC 11
Year: 2013(2), 2017 (1), with Drawing Head, Type IDF-R, with autoleveller, with Can changer, Type CC-R, with TRUETZSCHLER CORNERED CARD Cans, Year of manufacture 2010 – 2017, Suitable for TC7 to TC19 cards, Dimensions 920mm x 220mm x 120mm
8x TRUETZSCHLER CARDS Type TC 15
Year: 2017, with Drawing Head, Type IDF-R-II, with Can changer, Type CC-R, with auto leveller, TRUETZSCHLER CORNERED CARD Cans, Year of manufacture 2010 – 2017
Suitable for TC7 to TC19 cards, Dimensions 920mm x 220mm x 120mm.
5x SAURER OPEN END SPINNING MACHINES Type ACO 8
Year 2012(1),2014(2), 2015(2), 216 Pos. Rotor dia. 33 mm, Spin box SE 20, Corolab Yarn Clearers, Type XF, with Foreign Fibre detection, Face Plate Type 31, Opening Rollers Type B 174 DN, Informator OSC with Touchscreen and USB, Conometer, Automatic Package Lift with, Neuenhauser Cone Transport, DIGI Piecing, (1) 4 Doffers, (4) 2 Doffers, Multilot 3 System.
3x SAURER OPEN END SPINNING MACHINES Type ACO 9
Year 2018, 216 Pos., Rotor dia. 31 mm, Corolab Yarn Clearers, Type XF, with Foreign Fibre detection, Face Plate Type 31, Opening Rollers Type B 174 DN, Informator OSC with Touchscreen and USB, Conometer, Automatic Package Lift with, Neuenhauser Cone Transport, DIGI Piecing, 2 Doffers, Multilot 3 System.
1x SAURER OPEN END SPINNING MACHINE Type ACO 8
Year 2011, Upgraded in 2017 to AC10 Software, With 10% energy savings, 408 Pos., Rotor dia. 33 mm, Rotor type TB 633 B, Spin box SE 20, Corolab Yarn Clearers, Type XF, Face Plate Type 31, Opening Rollers Type B 174 DN, Navel Type Spirit R, Informator OSC with Touchscreen and USB, Conometer, Traverse Motion System (Tooth Belt), Automatic Package Lift, 4 Doffers, DIGI Piecing, Waxing device 75 mm x 45 mm, Green Torque Stop, Angle of Wind 26-44 deg, Cradle Pressure 0-60 N, with Multilot 3 & Sampling System.
AJ03/090326/AS/
Complete Cotton/Synthetic Short Staple Open End Spinning Line
Complete Cotton/Synthetic Short Staple Open End Spinning Line:
Line is in production.
Blowroom:
1x Unifloq, 2007, Rieter A11
1x Uniclean, 2007, Rieter B 12
2x Unimix, 2007, Rieter B70
2x Uniflex, 2007, Rieter B 60
2x Condenser, 2007, Rieter A 21
1x Control panel, 2007, Rieter
2x JOSSI, 2008, JOSSI ED.40-1200 IN SPECT
1x Contamination control, 2007, Rieter B 25
1x Aksifilo, 2014, BALKAN B20
2x DX Dust extraction, 2003, Trutzschler DX 385
1x Jossi fire shield, 2017, USTER JOSSI Fire shield
2x Fire shield, 2014, USTER JOSSI
2x Fire shield, 2007, USTER JOSSI
1x Metal detector, 1991, Trutzschler ASTO 800
1x Metal detector, 2007, Rieter A4
1x Metal detector, 2013, TTEJ MTT-2
1x Uni control, 2007, Rieter
Carding:
9x Card, 2007, Rieter C60
1x Card, 2011, Rieter C60
1x Card, 2014, Rieter C70
Draw Frames:
4x Draw Frame, 2007 Rieter SB-D 40
1x Draw Frame, 2003 Rieter RSB-D 35
4x Draw Frame, 2007 Rieter RSB-D 40
Open-End Spinning Machines:
8x Open-End Spinning, 2007, Rieter R40 – 440 ROTOR – 4 ROBOTS
AF74/050326E/LL-L/F/AS/
7 x Saurer SC6 Carding Machines
Year 2022/2023
Width 1380mm
Automatic coiler
Can size 1000x1200mm
Continous suction
Single linkerin
Universal wires
AG52/020326D/CPL-CI/F/BS/
Rieter R40 Open End
Quantity: 1, Year: 2005
Electrical Data: Voltage: 3 x 440V, Frequency: 60 Hz, Current: 260 A, Pneumatic Requirement, Compressed Air Pressure: 6 Bar, Machine Configuration, Number of Rotors (Spinning Units): 360, Number of Robots (Piecing Units): 2, Spinning Components, Rotor Type: 40 XT-BD, Adapter Number: 40, Card Clothing Ring Model: B174DN, Funnel Type: K4-K, Additional Features, Equipped with aerobearing system (aeromancal), Equipped with waxing device (paraffin applicator), Running.
AE51/260226E/YS-S/F/BY
OE Rieter R40 spinning machine
Quantity: 1, Year: 2008, 420 spindles,4 robots, Rotor 33 XT5 B
Channel plate 31
Opening cyl. B 174 DN
Twist element green/white
They working with viscose: from Nm 34/1 to 60/1
Machine complete still in production
As you see machine is in perfect working condition.
AA03/230226E/LY-L/M/CF/
NSC PB32 Combers
Quantity: 4, High Quality Machine.
They have been refurbished and have been in use without any problems for two to three shifts, 20-22 days per month. There are five machines in total, four of which were built in 1998 and one in 1997. They are equipped with PLC.
AD65/200226/
Trutzschler Cards & Blending Line / Rieter Combers / Zinser Rings
7x Trutzschler TC03, Year: 2007
1x Trutzschler blending line with 4 scaler, Year: 2005/1998
7x Rieter Combers E35/E76, Year: 2010
16x Zinser RM351 1116 sp, 48 mm ring link to Schlafhorst 338, 42 head winder, Year: 2004
AB46/190226/BJ/
Rieter C60 S Cards
Quantity: 5, Year: 1×2005-4×2011, Can Size: 40*48 inch, With Auto can changer, Waste collection : Continous/Downward, No of lickerin : 1, Stationary flat front: 2, Stationary flat back : 4, 3X400 V 50Hz, 6Bar.