AI20/101125E/RT-O/M/CX/
Cotton Waste Processing Plant
It has been dismantle and in storage .Plant in good working order .Plant is complete .
Twin rotary bale presses not included .The capacity is 4 to 6 bales per hour of 230 kg each .
Production dependent on waste content of raw waste material introduced into the line .
AA10/041125E/YS-Y/F/
Koltex Regranulation Line for Plastic Wastes
Quantity: 1, Year: 2012
Consisting of: KOLTEX waste regranulator, Model KL 80/2012, Feeding by transporter belt, Delivery by pneumatic ducts to big bags or containers, Output (LDPE) 200 kg/h, Main motor on extruder 55KW, 7 heating and 7 cooling zones, 6 movable and 6 stable knives, Condenser motor 45KW, Hydraulic sieve change of plates, cutting N\ear headstock in water mist, Fan and fan transporters of 5.5KW and 3 KW.
AE99/141025/
Autefa Tearing Line
Year: 1991
The line consists of:
1x Autefa Picker
1x Pierret Robot
2x Guillotine cutter Pierret CT-60
2x Dell’Orco mixing chamber
2x Trapp bale opener
1x Trapp process mixing plant
1x Trapp mixing chamber
1x Ommi oiling unit
1x Mesutronic metal detector
1x Dell’Orco beater (shaker)
1x Autefa baling press
1x Autefa carousel press, overhauled in 2025, new control system
1x LTG dust removal/filter chamber
5 tearing drums
working width: 1525 mm
drum diameter: 950 mm (without pins)
AE99/141025/
Laroche Tearing Line
Year: 1989
The line consists of:
1x Laroche step cleaner
1x Autefa baling press
1x Balkan mixing chamber with working width 1600 mm, capacity approx. 16 m³
1x Pierret Robot
2x Guillotine cutters Pierret CT60
number of tearing drums: 3
working width: 1460 mm
drum diameter: 750 mm (without pins)
AA10/040925/
Laroche Blending and Opening Unit
Consisting of:
1x LAROCHE SUPERMIX Blender Type SMIX 2000, year 2021, width 2m
1x LAROCHE Fine Opener Type OH 2000
AA10/040925/
Laroche Tearing Line
Quantity: 1, Year: 1989, Type JUNIOR 1400, 3 drums, Working width 140 cm, Drum diameter: 750 mm, LAROCHE Step Cleaner, AUTEFA baling press, BALKAN mixing chamber working width 160 cm, capacity +/-16 m³, PIERRET Robot Bale Opener, 2 PIERRET Cutters Type CT-60.
AA10/040925/
LAROCHE / PIERRET / AUTEFA unit
Consisting of:
1x LAROCHE Tearing machine, year 1996, working 2 m, 3 Drums
3x PIERRET Guillotine cutting machines, Year 1996
1x AUTEFA Vertical Press Type 397-45, Year 1996, double bale, automatic tying
1x LAROCHE Opener Type SMIX 2000, Year 2021, chute-feed
AA05/280825/BG/
TEARING LINE
Dex 73 CUTTING MACHINE PIERRET CT60-20
(Instead of cortadora Margasa, which is on pictures)
Year 1998
Width 750mm
-French instructions manual –
Dex77 CUTTING MACHINE BALKAN DT-61
Year 2011
Width 750mm
Spanish instructions manual
Dex 34, dex 79, or Dex80
2 MIXING BOXES OMT TIPO 1 + FEEDER (CARGADOR DIABLO) +
Automatic boxes for ideal mixing of the fibers, with high production thanks to a perfect vertical milling of
the textile material which are laid horizontally inside the box.
YEAR 1995
Spanish instructions info/Spanish instructions manual
They are fed with a FEEDER MACHINE (CARGADOR DIABLO), from Tecnomeccanica Biellese.
Dex 79 FEEDING DOUBLE BOX TECNOMECCANICA BIELLESE
SERIE 7534-CA1 7534-CA2 YEAR 1998
SPEED m/min 49
Dex 96 TEARING MACHINE MARGASA(DIABLO)
6 tearing drums , 1000 mm width, year 1986
Dex 95 BALES PRESS JOVISA(PRENSA) PF1150 / 130
year 1986
Pressing force up to 200 T.
It makes bales of 1150 x 750 mm, of around 350 kg/bale.
INATALATION COMPLET LAROCHE + PIERRET
1 LAROCHE TEARING MACHINE
Working 2 m, 3 Drums, Year 1996
2 CUTTERS ROTATIVE LIDEM
Width working 500 mm, Year 2002
1 VERTICAL PRESS AUTEFA
Type 397-45, Doble balle, Automatic tie, Year 1996
1 CHAMBER RESTING ROOM MARGASA
1 OPENER LAROCHE , Type Smix 2000, Width working 2 m, Chutte feed, Year 2021
AB45/310725E/CC-Y/F/AQ/
Gamba Rotary Cutter
Quantity: 1, Year: 1990, Overhauled and Repainted in the year 2022 , Working Width 500 mm, 380 V 50 HZ.
AB45/250725/
Margasa Avant Card
Quantity: 1, Year: 2015, model AV 1800 , with chute feed and cage condenser , working width 1.800 mm , Main cylinder with N° 5 Working cylinders , Conditions: Dismantled
AI59/300625/
Fiber Openers & Felt Opener Unit
1- Davis & Furber 6 bar pin picker with 20 hp main and feed table with porcupine feed roller.
Has 20 hp main with 1.5 hp gear drive. There is a variable frequency drive on the feed table. There are motor guards and transition included but not attached. There are 5-6 pins missing or damaged.
2- Kirschner 3 blade Fine Opener hopper fed about 54″ wide and 10 hp main with several feed rolls and transition.
Just 3 large lags with sharp pins. 10hp main no controls but I can supply a switch to start. 440v 3 phase and 1.5hp gear. There is compression roll to large feed roll that feeds 2 smaller fluted feed rolls. It is hopper fed with electronic eye. Width is 54″ across the drum. Photos show last feedrolls before entering the transition.
3- Toyota Felt Trim Opener with large feed table and coarse wired drum about 24″ drum x 48″ wide It has a 15 hp main and extra cylinder.
48″ wide x 24″ diameter cylinder with extra cylinder. 15 hp main and 2.2kw gear with large feed table conveyor. Double fluted feed rolls. Has a small fiber condenser to separate but it is disassembled currently.
4- JD Hollingsworth shredmaster with large feed table and large wired in feed roll, 3hp and transition.
These could be used for wool and waste processing.
toyota felt opener’s main motor maybe removed
some spare drums maybe given
Wooden Pin lagged drum missing 1 lag about 39″ long 15″ diameter.
Cotton cleaner wire cylinder fine wire 48″ long x 15.5″ diameter and coarse tooth feed roll to match needs
The lengths are as follows:
1 Davis&Furber without transition attached feed
2. Toyota felt opener in feed conveyor removed 10-1/2′
3. Kirschner fine opener with transition attached 6′
4.Hollingsworth shredmaster 5′
AB65/020625/BG/
Masias Bale Opener
Quantity: 1, Year: 1992, Type AC, 1,80 m working width, 6 m long feed.
AA10/280525E/CP-R/M/BY/
PUGELLI Rotary Cutter
Quantity: 1, tested, blade 850 mm., input belt will be changed with new belt.
AB45/280525E/YC-R/M/BY/
ROLANDO Bale Slicer
Quantity: 1, Year: 1989, table width 1300, belt length 4000 mm.This is a bale cutter that is used to roughly cut (17/19 cm.) the material and prepare it for the normal cutter.
AA10/280525E/RO-R/M/BY/
Italpresse Hidraulic Bale Cutter
Quantity: 1, Year: 1989, 60 Ton, Working width 1.000, Condition: Mill floor
AG47/230525E/LC-L/M/
Pierret CT.60 Guillotine Cutters
Quantity: 2, Year: refurbished in 2025, Each machine is available separately, ww: 600 mm.
AA10/230525E/LP-R/M/BY/
Tearing Line
1x DELL’ORCO Feeder width 1000 mm.
1x BECHERINI Tearing machine 2 drums + spare drum.
Factory is doing 350Kg per hour with this machine.
Price is shown in the offer.Its 380V/50Hz/3Phو The company was processing cut rags. Drums armed with Pins aggressive, sharp tip to cut rags
Year of make: around 1980
*AG47/070425E/CS.L-A.L/M/BY/
Laroche Rotary Cutter
Quantity: 2, Each machine is available separately, ww: 500 mm.
AA94/250225E/YI-L/F/
Laroche Tearing
Quantity: 1, Type Super Europ, ww. 1400 mm, 1 cylinder Ø 1000 mm, manual feeding, motor 220/380 V, 60 Hp, 45 Kw, filters, 1 spare cylinder.
AG47/210225E/TY-T/M/
Laroche Junior Single Drum Tearing Line
Year: 1989 – refurbished in 2022, ww: 1.45 m.
AG47/101224E/RS-Y/M/
Becherini Double Drum Tearing
Quantity: 1, Year: 1989 – refurbished in 2003, ww: 1 m.
AA22/101224/
EREMA Re-Pelletizing
Year: 2007
Type: 1310TE
A re-pelletizing machine is a recycling system used to convert plastic waste into high-quality plastic pellets for reuse in manufacturing. It processes the scrap material by melting, filtering, and pelletizing the material. Renowned for efficiency and precision, Erema machines are widely used in sustainable production for reducing waste and promoting circular economy practices.
Output 750 kg/hr of PP, consisting of:
– conveyor belt type FB _7000_1100_SH, 7000 mm long and 1100 mm wide
– metal detector – with double layer coil for detecting all metallic materials.
– reel feeder device RZ120 max. feed speed: 20 m/min
– Intarema® process combination I_1310_T
– Erema backflush filter SW_4_134_RTF
– hot die face pelletizing cutter system HG244D
– pellet dewatering screen GS_2000
– pellet drying centrifuge EG250-NK+TW
AG47/101224E/ORL-RL/M/
4-Drum Tearing Line
Quantity: 1, Year: 1996, ww: 2 m.
Consisting of:
1x Laroche 4-drum tearing line, ww: 2 m
1x Dell’orco & Villani blending box
1x Kavurlar vertical double bale press, bale weight: 350 kg
AG47/101224D/LOO-CO/M/
6-Drum Tearing Line
Quantity: 1, Year: 1995 – electric motors from 2020, ww: 1 m.
Consisting of:
2x OMT rotary cutters, ww: 1 m
1x Margasa 6-drum tearing machine, ww: 1 m
AG47/101224E/TPC-RC/M/
4-Drum Tearing Line
Year: 1990-2000
ww: 1.5 m
Consisting of:
1x Pierret robot, Year: 1995
2x Pierret CT.60 guillotine cutters, Year: 1995, ww: 600 mm
1x blending box
1x Laroche Jumbo 4-drum tearing machine, Year: 2000, ww: 1.5 m
1x Autefa vertical double bale press, Year: 1990, pressure: 70 tons
AG32/101224E/TRI-RI/M/AN/
Laroche Complete Tearing Plant
Quantity: 1
Year: 2000
1x 4 drums Laroche Jumbo ww 1,5 m
incl.
1x Robot Pierret
2x Pierret CT 60, one with metal detector
blending room
storage silo
1x Autefa bale press 70 to, with automatic strapping
Dustfiltration
fireprotection
The line is still running , in top condition.
The balepress and the filtration is already in dismantled condition.
calculate with 7 to 8 – 40 ft hc container.
Line is in production
4 Pinned Drums (all drums are Pinned)
Factory uses mainly PES filaments
Production up to 1500kg/hour