Quantity: 10, Year: 2008, Used Gas J320 GS C 105 – 1095kW, 400V, 50Hz, Operation hours: less than 5000, Gensets are dismated. Scheduled technical maintanance can be provided upon request including 6 months wattanty.

Quantity: 4, Year:2010, “””NEW MACHINES”” ,”””NOT USED”””, hours: zero, Used Gas J420 GS B 25, 1451kw, 400v, 50hz, Fuel:Biogas-NG, Gensets are dismated, Made in Austria, It is one completed power plant, Scheduled technical maintanance can be provided upon request including 6 months wattanty.

Quantity: 20
G3512H GAS engine and Caterpillar alternator.
400V, 50 HZ , Operating at 1500 RPM.
1500 KW
Standard OPERATION

1. Design:
These generating sets have been designed to operate continuously under site conditions of -10 to 55 deg. C.

2. Standards:
Our complete range of generating sets comply with the latest British and European standards. When requested a Lloyds, SGS or Cotecna Certificate of Quality will be issued.

3. 20 x 1500 KW Standard Generating Set:

3 . 1 Engine:
Manufacturer : Caterpillar
Model : G3512H
Output : 1484 kWm Prime at 1500 RPM
: 1632 kWm Standby at 1500 RPM
Capacity : 59 litres
Cylinders : 12
Cycle : 4 Stroke
Aspiration : Turbo + AC
Comp Ratio : 13.6 :1
Bore : 170 mm
Stroke : 215mm
Governor : Electronic
Start : Electric Start
Cooling : Tropical Radiator
Flywheel : Heavy Duty
Filtration : Air, Fuel and Oil
Instruments : Oil Pressure Gauge, Water Temperature Gauge
Battery Charge Ammeter

3 . 2 Alternator:
Manufacturer : Caterpillar
Model : Kato
Output : 1854 KVA Prime at 1500 RPM
2039 KVA standby at 1500 RPM
Voltage : 400V, 3 Phase, 50 Hz, 0.8 PF
Type : Brushless
Self-exciting
Automatic voltage regulation
Tropicalised
Insulation : Class H
Temperature rise : Class H
Degree of Protection : IP23

4. Standard Control Panel:
1500 kW Generating set
EMCP 4.3
MCCB Circuit Breaker, 3 Pole, 400 KVA

5. Accessories:
5 . 1 Base tank
5 . 2 Silencer
A silencer is included
5 . 3 Electric Start
A 24V electric starting system is supplied
5 . 4 Vibration Dampers
A set of vibration dampers are fitted to the generating sets.
5 . 5 Documentation
The following set of documentation will be supplied with each set :-

Operating manual
Maintenance manual
Wiring diagram
Test Certificate
Guarantee Certificate

3 gas generators, Manufacturer: MTU Germany 2000 KW, Year of manufacture: 2019, zero hours of use.
There are 3 available.For technical details, see the type plate.

Quantity: 1, Model: 2020V20, Capacity 2000kW

Quantity: From 1 genset to 10 genset, New MWM, 1 MW, , Model; CG 3016V16S, Made in Germany.
The standard warranty period is 12 months from commissioning, max. 15 months from goods dispatch.
Commissioning and Remote monitoring CHP commissioning (if genset is purchased as CHP unit) will be performed by professionally trained staff of the CHP manufacturer and will be quoted separately under local conditions.

Same as Remote monitoring and After sell service.
General description of offered technology
– MWM – gas engine with main accessories
– Leroy-Somer or Stamford – Alternator
– Dungs – gas train
– ComAp – control system – option
– Control and Power switchboard (ABB, Schneider MCB) – option

Quantity: 1, Year: 2025, Status: New/unused
Engine: Caterpillar 3516B, Generator power 2250 kVA
Fuel consumption: 304.5 Liters per Hour at 75% Load
Generator:Leroy Somer DSG 74 L, Engine manufacturer:Caterpillar
Frequency:50 Hertz
Voltage 400 V, Total weight GVW:16,080 kg
Dimensions (LxWxH): 6562x2850x3398 mm, Country of production China
Extra Control panel, Note: Machine is BRAND NEW Zero Hours
Its a Diesel Generator.

Quantity: 1, Year: 2023, Condition: new, Model: C1100D5B. 1100KVA Generator.
Technical details:
Power: 1,150 kW (1,563.56 HP)
Total length: 6,460 mm
Total width: 1,600 mm
Total height: 1,840 mm
Current frequency: 50 Hz, Voltage: 400.
This is a DIESEL Generator.
Machine has ZERO hours and its made in 2023.

Quantity: 3, Year: 2021, Machines are each 2 MW, Have a R2 overhaul and upgrade with the latest standards of Guascor. They will come with one year factory warranty.

They are equipped with synchro switch, control system, dry coolers etc. So it is “plug n play” to prevent work on site. The engines has worked for 12.000 hours, 50hZ and 690V.

The machine/s has everything for running. Dry coolers, control system, exhaust, synchro switch, cables, and they are installed and have Factory Acceptance Test.

In Warehouse.

Quantity: 2
Gas Generating Sets CAT 2 × 2000 kW / 400 V / 50 Hz – 2017 / 2019

These good condition natural gas-fired CAT CG170-20 generators with very low hours were manufactured in 09-2017 and commissioned in 2019 by a local CAT dealer. There are totally four identical units, and they have provided electricity to a local factory. Operations stopped 2 years ago but machines are still installed and intact. Enclosed are a set of pictures of offered units in 02-2024.

NOTE: Supplier has inspected these units by himself.
The CAT CG170-20 units are turbocharged, water-cooled, high-efficiency gas engines equipped with the CAT TEM control system. Engines are 20-cylinder in V-format with total displacement of 53.1 liters and speed 1500 rpm. Each engine is coupled to a 50 Hz Leroy Sommer synchronous alternator.
Delivery term FCA Loaded on your truck, tested with full load. Load test is considered to be approved if min 95% of nominal load is reached and all items belonging to scope of supply are working properly
Payment term :50% down payment, 30 % before dismantling, 20% before loading.
Other terms : Will be sold As-Is condition
Documentation :CAT standard documentation
The Scope of Supply:
2 x CAT CG170-20 gas generating sets
2 x CAT TEM control panels
2 x Exhaust gas mufflers
2 x Engine cooling radiators
Technical Data
Manufacture : Caterpillar Energy Systems, Germany, Manufacturing year: 09-2017
Engine type :CAT CG170-20 / 1500 rpm, Electrical output :2000 kWe / 400V / 50Hz
Electrical efficiency:44.4 % ISO Condition, Operating hours :2398 – 4447 hours since new
Starts :663 – 1111 since new, Fuel Natural Gas

Quantity:1
This containerized MWM 3020 V20R natural gas generating set with heat recovery system for production of 95C hot water is made in year 2025 and has never been installed.
Transportable steel container with good accessibility and optimum space provision for maintenance and operation. Container is divided into two separate rooms – the machine and the control room. Inside of the containers is lined with mineral wool, insulation membrane, and perforated metal plating. Lubricating oil supply fresh oil tank and waste oil tanks with volume 950 liters are installed in the container.
Air inlet ventilation block, insulated exhaust gas silencers, hot water boiler and cooling radiators are supplied loose and needs to be installed on the roof of container.
Plant operations are controlled with MWM digital power plant control TPEM (Total Plant & Energy Management) with Schneider PLC.
Packaging of this unit is made by professional European company with good references.
Delivery includes 1 set of electronic docs in English or in the original language.

Payment term:
50 % advance payment in 5 calendar days after contract signing.
50 % in 10 calendar days after the written confirmation about unit readiness for shipment prior to pick up
Warranty: There is a 12-month defect liability period following the initial start-up of the unit, but no more than 18 months from the date it was delivered

Technical data:
Engine :MWM TCG 3020 V20R, Generator:CAT 2875 kVA / 10 kV / 50 Hz
Power capacity at alternator :2300 kW, Hot water capacity at 95C :2255 kW
Electrical efficiency:42.4 %, Thermal efficiency :43.6 % +/- 8%
Plant control system :MWM TPEM with Schneider PLC
Certification : CE, Warranty : Factory warranty , Container main dimensions :16.4 x 3.0 x 3.0m (L x W x H without machinery on the roof), Container operation weight Approx 50 ton