Quantity: 1, Year: 2010, Position: 45
Wrapping course 6″ (152 mm.) Conicity 4°20′, 59x170x33 mm.
Automatic lifting of the filled bobbins (no. 03 carts) + relative unloading conveyor.
Individual empty cone reserve storage.
Thread tensioner + motorized paraffiner, with centralized regulations.
Ispector electronic control computer for control, monitoring, programming of coning parameters.
Feeding with 6″ inch coils, conicity 4°20′ or 5°57′, max diameter 250 mm.
Magitex lint cleaning and suction equipment.
Jointair yarn splicer Mesdan 115 (No. 03 devices)
Line connection voltage 380 V, frequency 50 Hz.

Quantity: 1, Year: 2003, 48 winding heads, Cylindric bobbin, travers 170mm, diameter of tube 60mm, Yarn cleaners Loepfe 830N, 380V, 50Hz, Running, in very good condition.

QUANTITY: 1, YEAR 2003, N. 48 POSITIONS, SECTIONAL 8, ALIMENTATION BOBIN/BOBIN, LOEPTE TK830N, SPLICER 4924E, CYLINDRICAL DRUM TYPE, BLOWER.

QUANTITY: 2
1x YEAR 2004, N. 60 POSITIONS, SECTIONS 9, ALIMENTATION BOBIN/BOBIN, LOEPFE TK830N, SPLICER 4924E, CYLINDRICAL DRUM TYPE, BLOWER.
1x YEAR 2005, N. 60 POSITIONS, SECTIONS 6, ALIMENTATION BOBIN/BOBIN, LOAPFE TK830N, SPLICER 4924E, CULINDRICAL DRUM TYPE, BLOWER, AUTODOFFING.

Quantity: 1, Year: 1989, 20 heads, Complete with 20 Peyer 121 clearers for fine yarns and 2 control units which send 12 and 8 heads respectively. Inlet on 45 cm tubes, outlet on 5’57 cylindrical cone. Of this I have a pallet of spare parts including 2 motors, 1 blower, fiat arms, cone holder arms, rooms for the splicers…

Quantity: 1, Year: 2005, Type ORION L
56 heads, delivery 6″, fishing knotter (no splicer), Loepfe TK830N clearers, manual feeder.

Quantity: 1, Year: 1996, Main unit SX, n.60 heads, Feeding by cone with automatic cone change, Drum with 2 turns constant pitch, Axial motion, Conicity 4°20’, Waxing device, Aquasplicer Mesdan mod.4923E, Electronic clearers Peyer 551, n.2 trolleys for automatic doffing, n.2 cones magazine, n.2 pneumatic adjustments, Bobbin unloading belt, Lighting, Magitex.

Quantity: 1, Year: 2004, mod.ESPERO RL
32 heads (right side), delivery 6″, 4°20, Aquasplicer, Loepfe Zenit clearers, waxer.

Quantity: 1, Year: 1997, mod.Espero yoc 1997, 28 heads of which:
8 heads feeding with cone autom. change
20 heads feeding by revolver for little cones, tube dia.95 mm.
Delivery 6″, 4°20, Mesdan splicer, Peyer Opt/Qs optical clearers.

Quantity: 1, Year: 2013, Position: 45.
Wrapping course 6″ (152 mm.) Biko taper 67x170x56 mm. upon request we can supply in a 4°20′ cone)
Automatic lifting of the filled coils (no. 03 carts) + relative discharge conveyor.
Reserve storage for individual empty cones.
Thread tensioner + motorized paraffiner, with centralized regulations.
Ispector control electronic computer for control, monitoring, programming of winding parameters.
Feeding with coils of 6″ inches, taper 4°20′ or 5°57′, max diameter 250 mm.
Magitex lint cleaning and suction equipment.
Jointair Mesdan 115 thread splicer (N. 03 devices)
Connection voltage to the line voltage 380 V, frequency 50 Hz.

Quantity: 1, Year: 2000, With Nº 24 heads, Feeding by cones with automatic change ” S ” System ( 240 mm. diameter max ) , Pitch 6″ (152 mm) , conicity 4°20′ , Automatic bobbins doffing by 1 trolley-doffer , automatic empty cones feeding magazine , 2 section yarn stretcher + waxing device , Computer Ispector Control to set speed , yarn length on package and to control/monitor all the winding process , Electronic yarn clearers Uster UPC 200 MK 20 , Mesdan Splicer 490 L , or , Mesdan Fisherman Knotters 410 B ( one of the two chosen by the customer ) , Trolley blower Magitex , Machine fully refurbished.

Quantity: 1, Year: 1998
40 heads – drum diam 94 mm. 2 ply
Electronic clearers Loepfe Yarn Master , head TK 930H
Splicer Mesdan 4941 – waxing device
n° 2 trolley doffing – headstock SX – scarico rocche in coda
automatic cone changer , travelling cleaner Magitex
n° 1 set of Acqua splicer Mesdan mod.492
N° 1 set of meccanical knotter Mesdan mod. 410 for twisted yarn

Quantity: 1, Year: 2021, Type ECOPULSARS+ I DLS, 58 Pos., 8 positions per section, Right Hand Machine, S.I.S. Spindle Identification System with Pegs, Large Touch Screen, for Combed and Compact Cotton Yarn, Yarnrange between 60-120 Ne, Conicity 5 deg 57´, Traverse 6” (153 mm), with Waxing Device, Grooved Eco Drum with 3/2 Turns Spiral, C.A.P. (for Perfect Package Formation and Precise Package Length), C.A.T. (Computer Aided Tension) & Tensorflex, Upper Nozzle Yarn Presence Sensor, Disc Yarn Tensioner, Feeding Tube Length 160 mm, Bobbin Weight from 22gr, Duo Feeding Moist Airsplicer, Mod. 8951, Loepfe Clearers, Type Zenit+D Plus integrated, Clearer Sensor Head Zenit Plus with FF-Detector and PP Sensor, 2 Yarn End Finders, Tube Cleaner, Blower C.E. with Dust Discharge.

Quantity: 4
Year: 1997, 2x 60 head
Year: 1999, 2x 48 head

Quantity: 2, Year: 1996-1997, 1996 with inspector control and year 1997 with alfa panel, 56 heads position, Exit cone 6” 4°20’, Still drum 2 turns, Double yarn tensioner, Peyer cleares, Mesdan model 492 Water splicer, Waxing device, Package conveyor belt, Basket cone reserve on each position, n.1 trolley for automatic Doffer, Light along the machine, Blower Magitex, 380 V 50 HZ, Condition: Mill floor.

Quantity: 4, Year: 2009, Machine Type Polar – M, Number of Spindle 72, Spindle per section 8, Suction Blow Type Individual, Suction Blow Kotak, Blower Duct Upward Exhaust, Winding Drum Steel (72), Drum Turn 2W (72), Winding Speed Selection Moto K, Cone Holder Yoke, Winding Angle 4º20″, Winding Traverse Width 5″, Bearing Center Brake Ada, Yarn Clearer Loefee C, Control Unit Loefee, Sensing Head Zenit, Section head (SLT), Yarn cutter type Steel (72).
Joining Method: aNozzle 40Z2, Front Plate Chamber E5, Holding Lever -, Suction Mouth Type Comb.
Tensor: Waxing Device Ada, Tensor Disk Plate (72) , Tensor Spring Angin, Tensor Cutter Type Steel (72), Yarn Trap Coarse yarn count [Ø3], Gate Feeler Sensor, Shutter Cutter Type Plastik (72), Balloon Breaker Kotak, Blower Cleaner, Bobbin Conveyor Single Line, Tempat Dofing Belakang.
Magazine: Pockets 9, Diamater 60 mm, High 150 mm, Magazine Base Plastik (72), Full Pack Sensor Length, Weight, Measure Length Polar.
Motor Blower: KW 15 KW, RPM 1450, Ø Pulley Motor 306 mm, Ø Pulley Kipas 115 mm.
Motor Drum: KW 150 watt, RPM 2830
Size: Width 2655 mm, Length 27100 mm & 27350 mm.
All Machines are with Twin Splicer, Can see in the pictures.
Machines are running with Spun Polyester.
Machines in production.

Quantity: 1, Year: 2002
60 spindles,Clearer Leophe 840, Feeding and delivery 10 inch bobbin, Pot diameter 285 mm, Gauge 500 mm, For all kind of yarn PP and polyster and cotton also.

Quantity: 1, Year: 2005
60 spindles, Clearer Leophe 840, Feeding and delivery 10 inch bobbin, Pot diameter 285 mm, Gauge 500 mm, For all kind of yarn PP and polyster and cotton also.

Quantity:3, Year: 2012, n.60 heads each, n.2 machines with SX head
n.1 machine with RH head, automatic spool loader, h spool 200 to 260 mm
electronic clearers Quantum 3 – O30 F30 head, pitch 6″ (152 mm)
conicity 5°57′, 2-turn grooved drum parallel diam.98 mm
drum on.off electronic type anti ribboning device, booster / tensor / tensorflex, Aquasplicer Mesdan mod.4924 E
waxing device, n.1 automatic doffing trolley, individual basket, floor air exhaust, blower Savio, Volt 380 – 50 Hz

Year: 2009/2010, 72 drum.

Quantity: 3, Year: 2010,2011, With quantum 2, Type of feed: magazine 9 pocket, No. of drums: 72, Yarn cleare make: quantum 2 (IMKCI5F23Y), Drum type: Steel, Drum turns: 2.0, Traverse: 6″, Splicer type: MESDAN 690, Concity: 4″20, Empty tube conveyor: available, Suction: Individual, Hot air discharge: Upward, With OHTC.

Quantity: 5, Year: 2015, 60 spindle, LOEPFE cleaner, With splicer.

Quantity: 2, Year: 2000, mod.ORION, 16 heads, Delivery 6″, 4°20, Splicer Mesdan 594, Uster Quantum (030) optical clearers, Waxer, Manual feeder.

Quantity: 1, Year: 1998, mod.ESPERO RL, 24 heads , Feeding by cone with automatic cone change (240 mm. diameter max), Pitch 6″ (152 mm) , conicity 4°20′ , drum diam 94 mm. 2 turns asymmetric step, 2 section yarn stretcher + waxing device, Automatic joint yarn Splicer Mesdan mod. 490 L, Nº 1 trolley automatic bobbins doffing, Nº 1 automatic magazine cone reserve, Computer Alfa-Panel to set speed , yarn length on package and to control/monitor all the winding process, Electronic yarn clearers Uster UPC mkc20 , Magitex Blower, Lightening along the machine.

Quantity: 1, Year: 1998, Mod.ESPERO RL, 40 heads, Left head, Feeding from cones automatic, PC setting processing data and countermeter, Delivery 6” cylindrical 4°20, Drum with 2 turns, Mesdan Acqua Splicer 492 knotters, Clearers Uster UPC heads MK F20 A3 foreign fibers, 1 autodoffing trolley, Waxer, Cones store closed to the headstock, Magitex travelling blower, 380 Volts 50 Hz.

Quantity: 1, Year:1998, Type: ESPERO R, 08 heads, Feeding by cone with automatic cone change ” S ” System (240 mm. diameter max), Pitch 6″ (152 mm) , conicity 4°20′ , drum diam 94 mm. 2 section yarn stretcher + waxing device, Computer Ispector Control to set speed, yarn length on package and to control/monitor all the winding process, Electronic yarn clearers Uster UPC 200 F, Knotters Mesdan Splicer 490 L, or Fisherman Mesdan 410 B ,(one of them at the customer’s choice), Machine fully refurbished.

Quantity: 1, Year: 1999, but updated as explained.52 heads,
grooved cylinder diam. 94.
always worked only cotton.
use it to produce soft packages or hard packages.
Test computer bought new in 2019, on the occasion of the “heavy” overhaul, with 4,200 hours of work.
Double bobbin feeding with automatic feed change (“bicycle”)
4 ° 20 ‘taper (or cylindrical with tailstock change, tube up to max 178 mm.)
Stribbie Loepfe model Yarn Master Plus, TK 830N heads
knotter mod. 410, fisherman knot, with our experience up to Ne 240/2 gassed, valid up to Ne 240/2.
Automatic doffing, with a package conveyor belt on the back
Each head can work a different title with different lengths, at different speeds.
Tube storage in the machine head with automatic feeding of tubes to each single winding head
Magitex vacuum / blower with centralized dust discharge, in the machine head
Lighting on the whole machine
Current power supply: 220 volts three-phase, but designed for 380

Quantity: 1, mod.ESPERO RL, 32 heads, Delivery 6″, 4°20, Aquasplicer, Uster Quantum 2 clearers, Waxer.