Showing 1–50 of 62 results

Show sidebar

AB74/100621E/ACO-O/F/AO/

Volkmann VTS-05-0-C Carpet Cabler

Quantity: 1, Year: 2007, 120 positions, Wide gauge, Individual motor spindle, Motorspindle (Every position is controlled by a separate motor), Machine in excellent condition.

AA02/010621D/AIC-T/F/

Direct Cablers VTS05C

Year: 1993, With 120 positions

AE45/200521E/ARC-AC/M/BK/

Volkmann Twisting VTS05-C

Quantity: 2, Year: 1993, Number of Spindles: 120 spindles each machine, Machines are working in very Good Condition.

AA41/110521E/OC-O/M/

Volkmann Twisting VTS05-C

Quantity: 3, Year: 1994 , Voltage: 380 V, Number of Spindles: 120 spindles per machine .

AA02/290421E/AO-C/M/AN/

Volkmann BCF Cablers VTS-05-C

Quantity: 2 , Year: 1984 , 120 Pos., Pot dia. 290 mm, Pot depth. 300 mm, Gauge 360 mm, Traverse 10” Tube Take-Up, Series 3.01, Cabler Creel, (1) with Inverter

AC09/280421/AC/

Volkmann VTS 05C Two For One Twister

Quantity: 2, Year: 1988, Model: VTS 05C, No of Spindle: 90, 120, Pot Dia in mm: 285, Traverse in Inch: 10, Delivery Package; Cheese, Conicity: Cylindrical, Pneumatic Threading: Available, Balloon Limiter: Available, Spindle Drive: 4 spindle drive, Package Lifting: Manual

AA91/220121D/CR-R/F/AR/

Volkmann Series 4, VTS-05-C Twister

Quantity: 2, Year: 1987-1993, 120 spindles each, 360 mm gauge, Hysteresis in pots, Ball tension device in creels.
NOTE: They require 3×40′ Ctrs for shipment.

AC09/160121D/TL-AI/F/BF/

Volkmann VTS 05 Two For One Twister

Quantity: 2, Year: 2001, Model: VTS 05, No of Spindle: 120, Pot Dia in mm: 280
Traverse in Inch:10, Conicity: 4°20′, Package Lifting:Mechanical, Balloon Limiter: Available, Stopped ,Machines are Regular TFO, not cable twister.
Machines recently shipped to Asia from yarn factory in USA. MACHINES IN WAREHOUSE, CAN TEST RUN ‎

*AA02/070121/BY/

Volkmann Two for One Cabler

Quantity: 1, Year: 2006, Type VTS 05-O-C
144 Pos. (2 x 77 Pos.), Spindle Gauge 495 mm
Twist Range 21 to 355 T/min.
Yarn Count Range depending on spindle type
400 to 5000 dtex x2 – max. 8000 dtex x2
Spindle Speed to 8500 rpm – max. 10.000 rpm
Delivery Speed max. 150 m/min.
Feed Packages
Creel and Spindle Pot feed package:
Winding Traverse: 254 mm
max. package dia.: 285 mm
max. tube length: 290 mm
recommended tube I.D. 73 mm
net yarn weight: approx. 5,5 kg
Take up Packages
Cylindrical cross wound package:
Winding Traverse: 254 mm
max. tube length: 290 mm
recommended tube I.D. 73 mm
max. package dia.: 400 mm
Tapered cross winding package:
Winding Traverse: 254 mm
max. tube length: 290 mm
minimum tube I.D.: 33 mm
max. package dia.: 400 mm

AA30/101220/

Volkmann VTS05 Two for One Twisting

AA30/101220E/CR-C/F/

Volkmann VTS05 Two for One Twisting

Quantity: 1, Year: 1985, 120 spindles each
Feed from assembly wound 10 inch 3 deg 30 package 2 fold or 3 fold
Delivery onto 10 inch 3 deg 30 package ( 280mm tube x 78mmID x 45mm ID)
Central doffing conveyor
Flyer, 335mm pot 290mm limiter

AA30/101220E/AO-A.L/F/

Volkmann VTS05 Two for One Twisting

Quantity: 1, no number plate – Grey paint machine circa. 1980, 120 spindles each, Feed from assembly wound 10 inch 3 deg 30 package 2 fold or 3 fold
Delivery onto 10 inch 3 deg 30 package ( 280mm tube x 78mmID x 45mm ID)
Central doffing conveyor, Flyer, 335mm pot 290mm limiter

AF52/290920/AT/

Volkmann Saurer, Cabler 05-0-C

Quantity: 6, Year: 2006. Strander with 88 positions, of 50 cms. gauge, with tension control systems type alligator, Central conveyor of thread spool, load and air-as-

AC09/011020/AR/

Volkmann VTS 05C Cable Twister

Quantity: 7, Year: 2000, No of Spindle: 120, Pot Dia in mm: 290, Traverse in Inch: 10, Spindle Pitch in mm: 490, Delivery Package: Cheese, Conicity: Cylindrical, Pneumatic Threading: Available, Package Lifting: Mechanical, Motor kW: 60, Package Weight in Kg: 18-20, Feed Package Dia: 12.5″, Spindle Drive: 4 spindle drive
NOTE:
THIS MACHINE HAS TWO SEPERATE MOTORS TO DRIVE LEFT SIDE AND RIGHT SIDE SPINDLES.
THREAD GUIDE AVAILABLE.
CLOSED BALLOON -CONICAL COVER IS AVAILAVLE
TENSIONER AT CREEL AVAILABLE
FREE BALLOON LIMITER AROUND SPINDLE DONT HAVE BELOW IS THE POT PHOTO
TENSION DEVICE IN THE POT NOT AVAILABLE.
YARN BRAKE device is usually in normal Two for one twisting .. this device is not there in this TFO but this TFO has different cutting device as explained below:
The arrow marked is clamping and cutting device , if there is any single yarn instead of double yarn (see the arrow marked in picture) then the roller senses that there is only one yarn and then cuts the yarn and stops that position of the machine.

AB46/090820/AR/

Volkmann 2/1 Twisters VTS-05C

AB46/090820D/CO-C/F/AR/

4x Year: 1995

Pot size 290 mm. , Gauge 500 mm, 54 each side total 108 spindles
Voltage 460 AC 50 Hz, Package mechanical lifting, Cable creel

AB46/090820/AR/

1x Year: 1984

Pot size 290 mm, Gauge 370 mm, 60 each side 120 total spindles
Package length 290mm, Voltage 460 AC 50 /HZ, Package mechanical lifting, Cable creel

AG33/200720D/YC.L-R/M/AR/

Volkmann Cablers VTS 05-0-C-F

Quantity: 3 , Year: 1998, 120 spindles each, Gauge 445 mm.
They are 445 mm from center to center of pots, which the Volkmann rep says are on the lower end of the wide gauge cablers and people do run polyester on them.Hysteresis tension devices in the pots
Ball tension devices in the creel
They are currently running and can be inspected by appointment during regular business hours

AF40/090620E/AC-C/F/BU//

Volkmann VTS-05 2:1 Twister

Quantity: 1, Year: 1982, 112 Spindles, Type: 05C, 29 cm pot, 10″ take-up bobbin 1’50’
The machines does not have the upper creel. Factory is doubling the yarn on an assembly winder before twisting the yarn. Factory has not used the machines for cabling. The machines are still complete on floor in running condition.

AF40/090620E/AC-C/F/BU/

Volkmann VTS-05 2:1 Twister

Quantity: 1, Year: 1984, 112 Spindles, Type: 05C, 29 cm pot, 10″ take-up bobbin 1’50’
The machines does not have the upper creel. Factory is doubling the yarn on an assembly winder before twisting the yarn. Factory has not used the machines for cabling. The machines are still complete on floor in running condition.

AA02/080620E/LI-L/F/

Volkman BCF Carpet Cabler

1x Type VTS 050C, Model 4.01, Year 1992 (1), 108 Pos., Pot dia. 300 mm, Pot depth 300 mm, S/Z Twist, Feed Package,
1x Type VTS 05-C, Year 1984, 120 Pos., Pot dia. 290 mm, Pot depth 300 mm, Gauge 260 mm, Traverse 10” Tube Take-Up, Cabler Creel
With Inverter

AB46/080620D/RO-O/F/AR/

Volkmann VTS 05C Two For One Twister‎

Quantity: 1, Year: 2004, No of Spindle: 120‎,Pot Dia in mm: 295‎, Traverse in Inch: 10‎, Conicity: Cylindrical, Pneumatic Threading: Available, Package Lifting: Mechanical, Spindle Drive: 4 spindle drive

AA91/120220/AR/

Volkmann Series 3, VTS-05-C Twister

Quantity: 13, Year: 1982 to 1985. Narrow gauge. Six configured as 2 for 1 twisters and seven configured as cablers. The 13 available machines have one at 80 spindles, five at 96 spindles and seven at 120 spindles. Hysteresis, bullet and Reiter tension devices.

AA91/120220/AR/

Volkmann Series 5, VTS-05-C Twister

Quantity: 4, Year: 1997-2000, 150 spindles, Narrow gauge, Two set-up as 2 for 1 twisters and two as Cablers. Hysteresis, bullet and Reiter tension devices.

AF62/101119/CE/

Volkman VTS-05-C machines

Quantity: 2, Year: 1995, 120 positions each

AB74/281019E/SL-L/M/AO/

Volkmann VTS-05-0-C Carpet Cabler

Quantity: 1, Year: 2006, 144 positions, Wide gauge, Individual motor spindle