Showing 1–50 of 96 results

Show sidebar


Seydel Stretch Breaker 873

Quantity:1, Year:2012, With Temptek chiller mod. CF-7,5A, with 80 cans, Exit 1 sliver in 1 can dia. 1000 x 1200
only 8.000 production hours.
It includes a chiller to keep the Vulkolan cylinders at the appropriate temperature.
The price also includes a tow splicer and approximately 60 cans, perforated.
The machine has 2 deliveries: with and without relaxing (with steam), as well as a cooling belt. It has an automated can exchanger/loader.
It has a Tow Shaker to loosen the fiber, also a Tow Air Soldering to join ends and avoid waste.
Machine is dismantled.
The Seydel stretch breaker has a “two shaker” to loosen up the fiber.
Also a tow air-soldering device to join ends and avoid waste.


Sant Andrea Novara Melangeur

Quantity: 1
2M, 24 doubling, can diameter Ø700mm


Seydel 880 Tow Strech Breaker

Quantity: 1, Year: 1995 (renewed 2016), Auto doffing can 1000*1200


NSC Breaker TB11 & Re-Breaker GC15 R5A

Year:1999, Feeding 24 cans, Electronic autoleveller, 1000 X 1200 mm, Delivery can, Ball changeable, Can Size 1000 x 1200, Ball delivery, (it is posible to put ball delivery).



Quantity: 1, Year: 1987, Type: RSND



Quantity: 1, Year: 1986, Type: RSNDM



Quantity: 1, Year: 1985, RS / SN21


NSC Schlumberger Rebreaker GC15 R5L10

Quantity: 1, Year: 1996, can creel, 1000×1200 manual coiler. 5 roller breaking. Maximum delivery speed 500m/min. 27 cm wide head. Invertor speed control.


NSC Schlumberger Rebreaker GC 14R5L10

Quantity: 1, Year: 1993, 24 end can creel, 700×1200 manual coiler, 5 roller breaking, Maximum delivery speed 450m/min, 27 cm wide head, Inverter speed control.


Seydel Stretch Breaker 870

Quantity: 2, Year: 1999-1993, Tow to Top, Can size: 1000×12000 , No of silver: 1, Autodoff.


Seydel Stretch Breaker 870

Quantity: 1, Year: 1993, Tow to Top, Can size: 1000×12000 , No of silver: 1, Autodoff.


Cognetex Stretch Breaker Tow Cutter

Quantity:1, Year:1991, Machine inspected and mechanically was working nicely at inspection time.


Cognetex Preparation LOT‎


Preparation LOT

Re-breaker SMC 600/11V, year: 2002‎
‎1st passage SCE 600/11VA, year: 2002‎
‎2nd passage SC 600/22V, year: 2002‎
‎3rd passage SC 600/22V, year: 2002‎
Finisher FRC 300/24S, year: 2002‎


Preparation LOT

Re-breaker 2 SMC 11V, year: 1994‎
‎1st passage SC 11V, year: 1994‎
‎2nd passage SCE 11 VA, year: 1994‎
‎3rd passage SC 22 V, year: 1994‎
Finisher FRC 22/S, year: 1994‎


Cognetex Breaker MSC6


Cognetex Breaker MSC6

Quantity: 1, Year:2002‎


Cognetex Breaker MSC6

Quantity: 1, Year:2004‎


Sant Andrea Rebreaker

Quantity: 1, Year: 2001, Type RST21, Feeding 24 (12×2) cans/bobbins, Delivery 1 can 1000×1200 mm., 1 sliver.


NSC Schlumberger Converter TT12

Quantity: 1, Year: 2007, Type: TT12 tow to top cutter , Machines can do many material including acrylic, polyester or blend
Very little spare parts come with the machine.
NOTE: TT12 is good for Polyester, PP, Carbon Fibers…and other fibers.
NOTE: Machine is so up to date technology, its presented on NSC website;
The mastery of the chemical filaments crush cutting converting
Sliver perfect evenness and cleanlinessParfaite régularité et propreté du ruban
Tow checking with metal detectors and tension limiters,
Systems of flaments separation and relaxation before cutting
Wide range of cutting diagrams adaptable to the final product requirement,
Precise cutting at high speed
High technology GC drafting head
Delivery speed up to 400 m/min
Technical specifications *
Use: Crush cutting converting of chemical filaments tows of 50 to 120ktex presented in boxes or in bales
Filament fineness: 1.3 to 17dtex, Alimentation Creel with tow spreading-out system, Input load: Maxi. 240ktex, Delivery: 1 can Ø 1,000mm, height 1,200mm single end, Automatic doffing with square motions
Filament separating set Steel cylinder Ø 100mm, Rubber cylinder Ø 130mm, Pneumatic pressure at 4 bars: 17daN/cm, Feeding set: Twin cylinders Ø 100/100mm, Coated cylinder Ø 130mm, Pneumatic pressure at 4bars: 12.5 daN/cm, Cutting device Steel anvil cylinder Ø 193mm, Cutting roller Ø mini 156mm, maxi 168mm
Pneumatic pressure: from 700daN for 3bars to 920daN for 4.4 bars
Cutting roller pitch 75, 88 or 105mm, Hauteur diagram variation: CV (H) up to 35%, Drafting head GC chain gill
Delivery speed Up to 300m/min according to the material
Delivery weight 15 to 25ktex, GC head feeding By conveyor and pressure cylinders, GC twin feed cylinders Ø 80 and 30mm, Pneumatic pressure on GC twin feed cylinders At 4 bars: 80daN, Number of fallers on GC 144
GC faller pinning: 4 round pins n° 16 /cm 1/3 penetration
Pinned width on GC drafting head: 270mm, GC pinned field depth 200mm
GC draft cylinders: Ø 30 / 62.5mm – Pressure Ø 80mm
Pneumatic pressure on GC draft cylinders: 400daN maxi, Nip distance GC pinned field to draft cylinders 32mm, Distance GC feed to, draft cylinders: 336mm, Pre-draft on GC 1.3 to 2.5
GC mechanical draft 4.5 to 7.4 by 5% increment
First calenderer with pneumatic pressure Bottom Ø 80mm – Top Ø 80mm
Crimping box calanderer Bottom Ø 114mm – Top Ø114mm, Pressure: 200daN, Crimping box: Shutter adjustable by spring, Noise level: Below 85dB (A), Compressed air:Should be dry, free from water and oil traces, Pressure: 6 bars, Instantaneous consumption: about 20Nm3/h, Average consumption: about 10Nm3/h, Main motor Asynchronous with frequency inverter, Main motor power 18.5kW – 1,500rpm at 50 Hz, Suction motor power: 3kW, Servo motor total power: 3.5kW, Total installed power About 27kW, Net weight: 8150kg, Volume 46m3


NSC Converter TT12 and GC30 Gill Boxes

Quantity: 6, Year: 2007,
1 MACHINE Type: TT12 tow to top cutter
4 MACHINES GC30, Feeding 4×2 and delivery one sliver one can 1000×1200‎
‎1 MACHINE GC30, Feeding 4×2 and delivery one sliver one can 400×1200‎
Autolevel and Automatic press in CAN
All machines can do many material including acrylic, polyester or blend.
Machines speed until 600 Rpm but in the factory they were running at 450 rpm.
Feed creels CAN 1000×1200
Head: 270 cm
Delivery: 1 sliver 1 can
Can size: all 1000×1200 ( Autoleveller is 400×1200 )
One machine from 5 with Autoleveller and Automatic press
Oil spray: 2 Oil spray devices for 2 machines
Machines were doing polyester and can do other material also.
Very little spare parts come with the machines.
NOTE: TT12 is good for Polyester, PP, Carbon Fibers…and other fibers.


Seydel Breaker

Quantity: 1, Year: 1990, Type: 870 or 860 (not known), In Production.


Preparation Line

NSC Rebreaker
Quantity: 1, Year: 2003,

NSC Schlumberger Passage GC15
Passage 1: Year: 2003,
Passage 2: Year: 2003,
Passage 3: Year: 2003,

NSC Schlumberger Finisher FM41
Quantity: 1, Year: 2003, 24 spindles


Preparation Line


NSC Rebreaker GC15-R5A

Quantity: 1, Year: 2002, 1000x1200 Can, 24 infeed, 270mm Head


NSC Schlumberger Passage GC15

Passage 1: Year: 2001, 1000x1200 Can, with Autoleveler, 8 infeed, 1x1 output,270mm Head
Passage 2: Year: 2001, 700x1200 Can, 10 infeed, 2x2 output,270mm Head
Passage 3: Year: 2001, 700x1200 Can, 16 infeed, 4x2 output, 270mm Head


NSC Schlumberger Finisher FM41 (Rubbing Frame)

Quantity: 1, Year: 2001, 24 spindles, 30cm Bobbins



Quantity: 1, Year: 2006, RST 21, 24 Feed, 1×1, 1000X1200 CAN



Quantity: 1, Year: 1990, TYPE: R5L10‎, Tops Exit


Integrated Rebreaker Defelting NSC GC14

Quantity: 1, Year: 1993, 3 pre drafting cylinders , feeding creel 12 coupling by cans ,delivery 1 sliver in 1 can 700 x 1000 with automatic doffing , ensimage , 380 V 50 HZ ; Machine in excellent condition of maintenance


Seydel 871 Breaker

Quantity: 1, Year: 2000, Model 871, Cylinders 6, Vaporizer: Yes, 1000mm cans


Seydel Strech Breakers

Quantity: 2, Year: 1988, The machines have been dismantled professionally recently. They are complete and a lot of spare-parts are available.


Preparation Line

Seydel Breaker 871
Quantity: 1, Year: 2002

Quantity: 1, Year: 2002

NSC Schlumberger Passage GC15
Passage 1: Year: 2002, one sliver one can
Passage 2: Year: 2002, 2 sliver 2 can
Passage 3: Year: 2002, 4 sliver 2 can

NSC Schlumberger Finisher FM42
Quantity: 1, Year: 2002, 24 spindles


Sant Andrea Rebreaker

Quantity: 1, Year: 1986, Break DRAFTING: 4 OVER 4, GC HEAD : 3 PPCM 220 mm, COILER : 700 X 1000, Excellent condition running on mill floor can be inspected any time.


Seydel 871 Stretch Breaker Tow To Tops

Quantity: 1
Year 2001
Heater plates, csr steamer on exit
Delivery 1000 x 1200 mm. Can coiler
Pictures showing the machines as it is now.
Machine has been dismantled by skilled technician, good condition, ready to ship.
NOTE: 4 draft breaking rubber cylinders will be included on the supply.
Price includes, stretch rollers are covered with Tesilgomma. No.6 Istretch break rollers plus the 4 as spare parts .
The machine was in good running condition before it was stopped. Probably deserves 7,5 / 8 out of 10 quality ranking.
Stopped and stored in warehouse.
Machines with DC motors , as supplied by Seydel, with Electronic Drive control ( as pictures attached ) ;
the main motor is equipped of n. 12 brushes.
Machine is complete , as spare parts only n. 04 draft breaking rubber cylinders.
Includes free of charge 12 cans in excellent condition.
CSR steamer, Coller belt conveyor, Heater plates, coiler auto doff – Delivery 1000 x 1200 mm. Can coiler ‎, Guards ‎


Seydel 860 & 870 Breaker

Seydel 870 , Year: 1991
Seydel 860 , Year: 1988
1000 x 1200 mm


Cognetex Breaker

Quantity: 2, Year: 1999, Type: MSC.3


Sant’andrea Rebreaker

Quantity: 1 , Year: 2006, Model: RST 21, 24 Feed, 1×1, 1000X1200 CAN


Seydel 870 Breaker

Quantity: 1, Year: 1997


Sant Andrea Rebreaker

Quantity: 1, Year: 2006


NSC Schlumberger GC15 Rebreaker

Quantity: 1, Year: 2000


NSC Schlumberger TB11‎ Breaker

Quantity: 1, Year: 2000