Type of cross-wound package: cylindrical 0 73 mm Traverse : 254 mm (10”) Winding from : residual tubes or cones
Winding traverse 254 mm, for cylindrical tubes.
Winding speed up to 1.000 m/min.
Air splicer or Fishermann’s knotter
Linear guiding system.
Electronic length measurement by impulse counting on driving roll.
Finger tensioning device.
Package holder with vibration damper.
Electronically controlled anti-ribboning system.
Airjet unit to clean tensioner and photocells.
Very efficient doffing system with tube magazine under the spindle and 4 tubes in the magazine.
Vacuum system for catching the yarn ends in the creelcenter.
Creel for feed packages with tube/cone lengths up to 300mm, and with a capacity fo r :
20 packages with a max. diameter of 100 mm or
15 packages with a max. diameter of 150 mm or
10 packages with a max. diameter of 200 mm or
8 packages with a max. diameter of 275 mm
P-winding is standard, but optional P- and Q-winding is selectable just by changing a user parameter.
The winder is equipped with automatic doffing when the pre-set yam length is reached. The complete doffing cycle only takes 15 seconds and the magazine holds 4 empty tubes.
On demand, a machine without automatic doffing can be supplied, when tubes with large diameters (94 mm or more) are used.
The yarn guiding is done through linear guiding system with separate motor and inverter, allowing the random winding with a freely adjustable winding angle and electronic anti-ribbon system.
✓ Yarn count: very wide range, as well spun as filament yarns.
✓ Type of winding: random, angle electronically adjustable.
✓ Traverse: 254 mm or 10 inch
✓ Package form: cylindrical, standard on tubes diameter 73 x 290 mm s Automatic doffing v' Magazine per spindle: contains 4 empty tubes, v' Maximum package diameter: 410 mm s Linear winding speed: up to 1000 m/min.
S Angle of winding: freely adjustable between 13° and 21 °.
■S Electrical supply: 3 x 400 V or 3 x 480 V — 50 or 60 Hz s Installed power: 7,5 kVA COMPRESSED AIR ✓ For good and long lasting function of the air cylinders, valves and connections, supply of clean and dry air is necessary.