Non-Woven(Moquete,Layers,Hygiene)

1–30 of 67 results

  • AA22/050220/
    Asselin finishing needle loom
    Asselin finishing needle loom
    Quantity: 1, Year: 2004, Type: A50R-SM2, Width: 6750mm
    Andritz Asselin needlelooms are robust and reliable for consistent quality.
    The looms use the technology based on oil-lubricated modules with patented guiding piston design.
    Double board, upstroke, 40 mm stroke, 1500 strokes/min, 40 m/min linear speed, 2 x 7000 needles/linear meter.
    1x DSI Automatic Slitter/Rewinder – 6700mm width, With table, roll wrapper, Siemens controls
    Status: In Operation
    https://royalwesta.com/product/asselin-finishing-needle-loom-2/
  • AC44/040820/BY/
    Complete Non Woven Line
    Complete Non Woven Line
    Composed of: 3 fiber opener TEFAMA Model: 0311/111, 2 mixing chambers Carresi Model 10 551/ CT03032, 1 fine fiber opener TEFAMA Model 10551, 1 feeder BONINO Model BCM2400, 1 Card THIBEAU Model CA10 / 15P5 width 2.500 mm, 1 crossliner AUTEFA Model CL 2003 / 186.13-1481 modifyed in 2016, 3 needle looms FEHRER Model NL9/S, 1 needle loom DILO Model OD-SV 45, 1 needle loom DILO Model DI-lour-II S/35, 1 Calander WUMAG Model KAL, 1 Compensator MATTHYS Model 19322 S00-01, roller unit DILO Model SW-A-50, Condition: on Mill floor,
    https://royalwesta.com/product/complete-non-woven-line-2/
  • AA02/160720/
    Air Lay High Loft Thermobond Line
    Air Lay High Loft Thermobond Line
    Quantity: 2 lines
    OPENING: (Serves Line 1 and Line 2)
    7x TEMAFA BALTROMIX HOPPERS:
    1600mm, Weigh Pans, Feed Tables, Hopper #2 with overhead condenser feed capability
    1x ERIEZ HORIZONTAL MAGNET
    AA02/160720D/ARAI-TI/M/
    LINE 1: (Board or Roll Wrap Capabilities), YEAR 2006
    1x TEMAFA MIX MASTER / FLAT BELT & INCLINE SPIKE APRON, 5000 lbs Capacity
    1x TEMAFA HEAVY PARTICLE SEPARTOR
    1x TEMAFA FINE OPENER, 1600MM WITH FAN
    1x ARGUS METAL DETECTOR WITH DROP BAG
    1x TEMAFA RESERVE WITH CONDENSOR
    1x THIBEAU TMS/TCF CHUTE FEED, 2500MM WIDTH
    1x ANDRITZ SERVO X WEIGHT CONTROL
    1x FEHRER V21 / K12 AIRLAID CARD, 2400mm
    1x FLEISSNER VARIO AIR TV/Z24 THROUGH AIR OVEN:
    4 Zone Heat Section, 3 Zone Cooling, Double Teflon Belt, Top & Bottom
    1x RE MOISTURIZATION UNIT
    1x NDC ACCUTRAK RADIATION BETA DENSITY GAUGE
    1x TECHNOPLANTS MOTORIZED ACCUMULATOR, Type AC.26.MB, 100 Yard Capacity
    1x TECHNOPLANTS AUTO COMPRESSION WINDER:
    Low Tension Accumulator, Working Width 2600mm, 3 Crush Cut Slitters with Trim Grinders
    Cross Cutter, Automatic Tube Loading & Doffing, 1500mm Maximum Roll Diameter
    1x BOARD CUTTING LINE (LINE 1 ONLY):
    Board Size 88"x110"x3", ,Automatic Board Cutting / 3 x 10" Diameter Vertical Slitter
    Blades Cross Cutter, 8 Pneumatic Units for Stacking
    1x GRIBETZ COMPRESSION WRAPPING STATION
    AA02/160720/
    LINE 2: Year 2007
    1x TEMAFA MIX MASTER / FLAT BELT & INCLINE SPIKE APRON, 5000 lbs Capacity
    1x TEMAFA HEAVY PARTICLE SEPARTOR
    1x TEMAFA FINE OPENER, 1600MM WITH FAN
    1x ARGUS METAL DETECTOR WITH DROP BAG
    1x TEMAFA RESERVE WITH CONDENSOR
    1x THIBEAU TMS/TCF CHUTE FEED, 2500MM WIDTH
    1x ANDRITZ SERVO X WEIGHT CONTROL
    1x FEHRER V21 / K12 AIRLAID CARD, 2400mm
    1x FLEISSNER VARIO AIR TV/Z24 THROUGH AIR OVEN:
    4 Zone Heat Section, 3 Zone Cooling, Double Teflon Belt, Top & Bottom
    1x RE MOISTURIZATION UNIT
    1x NDC ACCUTRAK RADIATION BETA DENSITY GAUGE
    1x TECHNOPLANTS MOTORIZED ACCUMULATOR:
    Type AC.26.MB, 150 Yard Capacity
    1x TECHNOPLANTS AUTO COMPRESSION WINDER:
    Low Tension Accumulator, Working Width 2600mm, 3 Crush Cut Slitters with Trim Grinders
    Cross Cutter, Automatic Tube Loading & Doffing, 1500mm Maximum Roll Diameter
    1x ROLL WRAPPING STATION, Manual Bagging / built in house)
    1x ROACH CONVEYOR SYSTEM / 4 DUMP STATIONS
    https://royalwesta.com/product/airlay-high-loft-thermobond-line/
  • AA02/010720/
    Fehrer Machines
    Fehrer Machines
    Fehrer / Spinnbau / Technoplants 7 meter Geo Tex Line

    Fehrer / Fleissner Thermo bonding Lines
    https://royalwesta.com/product/fehrer-machines/
  • AA02/010720/
    Dilo Needle Punch
    Dilo Needle Punch
    Dilo / Spinnbau Needle punch line, 7 meter,Year: 2015

    Dilo Hiper Punch needle loom 3.5 meter
    https://royalwesta.com/product/dilo-needle-punch/
  • AB08/260620E/LL.L-P/F/BJ/
    DILO NEEDLEPUNCH (PATTERNING /STRUCTURING) MACHINE
    DILO NEEDLEPUNCH (PATTERNING /STRUCTURING) MACHINE
    Quantity: 1, Year: 2001, TYPE: DI - LOOP DSXB 45, WORKING WIDTH: 4’500 MM, Web In-feed, Compensator 1, Hydac Hydraulic Power-pack, Dilo Patterning Machine, Dilo Compensator 2, Dilo Roll-up. Machines are in excellent condition
    https://royalwesta.com/product/dilo-needlepunch-patterning-structuring-machine/
  • AA22/120620E/TRI-RI/F/CL/
    STP Impianti Spunbond/Meltblown Line
    STP Impianti Spunbond/Meltblown Line
    Quantity:1, Year:2000-2005, Width: 1500mm, Complete SSS triple-beam spunbond line including off-line slitter. Max capacity 300 ton/month, but average running 250 ton/month, but depending also on mix of GSM, speed from 300 m/min @ 10 gsm to 20 m/min for 190gsm, net fabric width 1500 or 1400 mm if desired, running 10-190 gsm, dtex 1.8 - 2.2, consisting of: Moretto polymer feeding and Jonix volumetric dosing system, two per spinbeam (color masterbatch + additive), 24 spinpumps in total (8/beam), 66 individual spinnerets in total, 216 holes each - dia 0.6 mm, Comerio CAL NT 410x2000 calender, electrically oil-heated, two cylinders - one engraved with diamond pattern and one smooth - cylinder dia 410 mm for both cylinders.Celli AC4-Windy winder, Testa Rossa 113 JT EK1 off-line automatic unwinder and slitter/rewinder, yoc: 2005, 2 slitting knives and semi-automatic crosscut, max ingoing width of roll is 1700 mm - max diameter 1500 mm and 800 kg weight.Atlas Copco ZA200 air compressor. Eurotherm inverters, Dynisco pressure controls and Euroterm temperature controls.Total power consumption 420 kW, Normally for medical grade products, SMS-technology should be used, due to extremely high barrier properties from meltblown fabric. Still in production.
    APPROX WEIGHT of the line 90 tones
    Customs Tariff No/ HS code is 84490090
    Width 1500 (Normal Line Configuration)
    GSM 10 to 14, GROSS WIDTH:1520, NET WIDTH:1400
    GSM 15 to 17, GROSS WIDTH:1560, NET WIDTH:1500
    GSM 18 to 150, GROSS WIDTH:1560, NET WIDTH:1530
    Width 1400 (Reduced if needed)
    GSM 10 to 16, GROSS WIDTH:1420, NET WIDTH:1300
    GSM 17 to 150, GROSS WIDTH:1460, NET WIDTH:1400
    https://royalwesta.com/product/stp-impianti-spunbond-line/
  • AA02/100620/BY/
    Complete Samhwa (Korea) Nonwoven Needle Punch Line
    Complete Samhwa (Korea) Nonwoven Needle Punch Line
    Year 2017
    Working width 1300 - 2000 mm
    Fibertype: PP, PET staple fiber (virgin, recycled)
    Fiberlength: 60 mm - 80 mm
    Basic Product specification: 2 Layer, 50% PP+ 50% PET,1300 GSM
    Final Product Weigth in g/m² 250-1500 gsm
    (Car side 1050 gsm + Street side 250 gsm)
    Final Product dimension: Winding Roll Type (dia. max. 1500 mm)
    Inner Paper Tube dia. 100 mm
    Speed: Surface Fabric 12m/min, Inner Fabric 4m/min
    Weigth Tolerance of final product +/- 5%
    Ratio of mechanical property Over MD: 1500N, CD: 2700 N
    Capacity: 2000 Tons/Year (240 days x 24h x 85%)
    Total Power Consumption 266.09 kW
    Line consisting of:
    Opening and Blending Section:
    4 Blending Feeders, Type SH-BF60, width 1,5 m, 450 kg/h
    1 Cylinder Opener, Type SH-CO60, width 1,5 m, 750 Kg/h
    3 Magnetic Traps, Type SH-MGT 300, dia. 300 mm
    1 Mixing Tank, Type SH-MT 250, Content 60 m³, 750 kg/h
    1 Fine Opener, Type SH-FO 60, width 1,5 m, 750 kg/h, Web Card & Feeding Section:
    1 Hopper Feeder, Type SH-HF100, width 2310 mm
    1 Double Doffer Card, Type SH-C100DD, width 2,5 m, 500 kg/h
    1 Crosslapper, SHCH4-3200, Input 2,5 m - Output 3,2 m, 80 m/min.
    Web Feeding / Needle Punching Section:
    1 Web Conveyor + Feeding System, Type SH-WC3000+SHWFS-3000
    1 Needlepunch Machine, SHS-DR3000, width 3,0 m, 1200 stks/min. single board downstroke, 4850 Needles, 55 mm Needle beam strokes
    1 Needlepunch Machine, SHD-UR2800, width 2,8 m, 1400 stks/min. double board upstroke, 10.000 Needles, 40 mm Needle beam strokes,
    1 Needlepunch Machine, SHD-DR2600, width 2,6 m, 1400 stks/min. double board downstroke,12.000 Needles,35mm Needle beam strokes
    1 Mahlo Measuring Device, Type QMS, Year 2017
    1 Unwinder, Type SH-UW 2600, width 2,6 m, Speed 13 m/min.
    1 Accumulator, Type SHDA-2600, width 2,6 m
    1 Edge & Cross Cutter, Type SHCC, MC-2600, width 2,6 m
    1 Auto Winder, Type SHAW-2600 with Metal Detector, width 2,6 m
    1 Edge Picking Machine, Type SHEP3-500, width 500 mm
    P.S. The Line is CE-Certified !
    https://royalwesta.com/product/complete-samhwa-korea-nonwoven-needle-punch-line/
  • AE56/020620D/SII-YL/C/
    Melt blown Fabric Machine
    Melt blown Fabric Machine
    Year: 2020, Width 1.4 meters, Make 95+, Daily output 1.2 ton.
    https://royalwesta.com/product/melt-blown-fabric-machine/
  • AE56/050620D/RYI-CI/C/
    Non Woven Fabric Production Line
    Non Woven Fabric Production Line
    Year: 2016, Width 3.8 meters
    https://royalwesta.com/product/non-woven-fabric-production-line/
  • AA10/050620/
    DILO Needle loom
    DILO Needle loom
    Quantity: 1, Year: 1991, Type DI-LOOM OD I B 25, Working width 2m50, CBF25 system, pitch 60 mm
    https://royalwesta.com/product/dilo-needle-loom/
  • AA10/050620/
    FOR Card
    FOR Card
    ‎1 FOR Card, year +/-1988, width 3 m, double doffer, comprising:‎
    ‎1 Weighing hopper-feeder, 2 Drums dia. +/- 1400 mm, double doffers dia. +/- 500 mm‎
    Delivery on FOR cross lapper, width at exit 3.80 m, wooden slats
    https://royalwesta.com/product/for-card/
  • AA10/050620/
    BONINO Card
    BONINO Card
    1 BONINO Card yoc 1982/1983, width 2800 mm., breast roller, drum, 2 doffers‎, Crosslapper 4000 mm.‎
    1 AUTOMATEX Pre-needle loom mod.PR22 A, width 3000 mm.‎
    ‎1 AUTOMATEX Cutting device mod. TL 72 TT 82, 16 cutting blades + 1 transversal.‎
    https://royalwesta.com/product/bonino-card/
  • AA10/050620/
    THIBEAU Card
    THIBEAU Card
    Quantity: 1, Year: 1986, Type C5 model BD23PP, , width 250 cm, double doffer, exit can
    https://royalwesta.com/product/thibeau-card-2/
  • AA10/050620/
    Cutting line
    Cutting line
    Quantity: 1
    Year: 1992 and 1993
    consisting of
    - 1 PIERRET Robot Loader
    - 1 PIERRET Cutter Type CT60
    https://royalwesta.com/product/cutting-line/
  • AC79/010620D/AAL-AI/F/BA/
    Fifteen Roller Drafter(NEW MACHINE)
    Fifteen Roller Drafter(NEW MACHINE)
    Technical Specification:
    1) Working width: 6500mm
    2) Roller: 15 pieces
    3) Roller diameter: Ф220 with wire
    4) Lift for worm gear manual lifting
    5) Line speed: 1-10m/min
    6) Power: 15Kw, frequency control
    7) Apply for web drafting after the cross lapper.

    Note: 1. All the motors are Siemens-beide products and inverters are Siemens products.

    III. Others
    Guarantee period is one year. Except the damage is caused by the buyer.‎

    The Seller will dispatch 2-3 peoples to do the installation and commissioning of the line at the ‎request of the Buyer. And the Buyer should provide round-trip air tickets, accommodation and ‎allowance.‎

    This quotation is not including the charge of installation and commissioning.‎

    User’s Responsibility
    Power supply to electrical control cabinet, wiring groove, shelf, wire etc. ‎
    https://royalwesta.com/product/fifteen-roller-drafter/
  • AC79/290520D/RS-Y/F/BA/
    Five Roller Felt Drafter(NEW MACHINE)
    Five Roller Felt Drafter(NEW MACHINE)
    Technical Specification:‎
    ‎1) Working width: 6500mm‎
    ‎2) Apply for web drafting after the pre needle loom. Change the fiber distributing structure.‎
    ‎3) Rolls are made by diam. 245 seamless tube.‎
    ‎4) Power:3.75kw‎
    Note: 1. All the motors are Siemens-beide products and inverters are Siemens products.‎

    III. Others
    Guarantee period is one year. Except the damage is caused by the buyer.‎

    The Seller will dispatch 2-3 peoples to do the installation and commissioning of the line at the ‎request of the Buyer. And the Buyer should provide round-trip air tickets, accommodation and ‎allowance.‎

    This quotation is not including the charge of installation and commissioning.‎

    User’s Responsibility
    Power supply to electrical control cabinet, wiring groove, shelf, wire etc. ‎
    https://royalwesta.com/product/five-roller-felt-drafternew-machine/
  • AD26/290520E/CTY-AA/M/AQ/
    Line Thermobonded wadding
    Line Thermobonded wadding
    Also coupled for wadding , 100/800 gr.x m2.
    Year built 1990/1992
    n. 1 FOR carding machine double drum double doffer working width 250 cm., production 400/500 kg / h
    n. 1 FOR cross-lapper , entry 250cm. / exit 350cm. – 400cm.
    n ° 1 conveyor belt from the cross-lapper to the oven
    n ° 1 Tomes thermofusion oven, width 330cm. length 600cm.
    n ° 1 Tomes longitudinal cutting system
    n ° 1 Tomes winder
    n ° 1 Transversal cutting system
    n ° 1 MAGETRON Packing machine to reduce the volume of large rolls,
    The plant is located in Italy and is in operation, but at this moment stopped
    https://royalwesta.com/product/line-thermobonded-wadding/
  • AD26/290520E/RAT-AY/M/AQ/
    Spunbonding Line
    Spunbonding Line
    Nonwoven production with PP
    Working width 1,8 mt
    Weight from 12 to 300 gr/mq
    Capacity from 350 to 400 kg/h
    Mixer feeder MORETTO yoc 2001
    n.1 station of mixer
    n.3 volumetric nproportioner
    n.1 unity aspiration
    O.M.B. Battaglio Extruder, yoc 2001
    Capacity 450 kg/h
    Material PP
    Electrical Power 195 kw
    Diameter spin 120 m/m
    Filter automatic clean COFIT yoc 2001
    Spinning chest system by IMA yoc 2001
    n.14 spinning position
    n.14+2 gear pomp
    n.18 spins group
    n.15 quench
    n.14 ejector
    Air condition QUENCH
    Capacity air aspiration 20000m3/h
    Temperature water 7°
    Capacity exchange 205.000 Kcal/h
    Forming Belt VECOM width 2000 m/m
    Belt COFPA typeMonostat 23 PC 850
    Aspiration by SAVIO type SCRD 140
    Feeder calendar belt VECOM
    Idraulic Calender by COMERIO yoc 1997
    n.2 cylinder diameter 360X1900
    speed from 5 to 100 mt/min
    temperature 280°
    cylinder pression from 50 to 100 N/mm
    Winder By CELLI yoc 1990
    Type AC£ working width 2000 m/m
    All the line are includine pannel controls cables and console with n.2 touch-screen
    https://royalwesta.com/product/spunbonding-line-2/
  • AD26/290520E/YPR-CA/M/AQ/
    Spunbonding Line
    Spunbonding Line
    Nonwoven production with Working width final product from min 3mt, max 3,3mt
    Weight from 12 to 300 gr/mq
    Capacity from 350 to 500 kg/h
    Mixer feeder PIOVAN yoc 2001
    n.1 station of mixer
    n.3 volumetric nproportioner
    n.1 unity aspiration
    S.T.P. IMPIANTI Extruder, yoc 2001
    Capacity 450 kg/h
    Material PP
    Electrical Power 195 kw
    Diameter spin 120 m/m
    Filter automatic clean COFIT yoc 2001
    Spinning chest system by IMA yoc 2001
    n.25 spinning position
    n.25+2 gear pomp
    n.26 spins group
    n.25 quench
    n.25 ejector
    Air condition QUENCH
    Capacity air aspiration 30000m3/h
    Temperature water 7°
    Capacity exchange 250.000 Kcal/h
    Forming web board/table: IMPIANTI CONTINUI Spa
    Belt IMPIANTI CONTINUI Spa
    Aspiration by IMPANTI CONTINUI Spa
    Calander Feeding carpet: IMPIANTI CONTINUI Spa
    Idraulic Calender by RAMISCH KLEINEWEFER
    n.2 cylinder diameter 400X3500
    speed from 5 to 100 mt/min
    temperature 280°
    cylinder pression from 50 to 100 N/mm
    Winder By CELLI
    Type AC£ working width 3300 m/m
    All the line are includine pannel controls cables and console with n.2 touch-screen
    https://royalwesta.com/product/spunbonding-line/
  • AB08/150520E/YC-O/F/BJ/
    DILO NEEDLEPUNCH (PATTERNING /STRUCTURING) MACHINE
    DILO NEEDLEPUNCH (PATTERNING /STRUCTURING) MACHINE
    Quantity: 1 , Year: 1992, TYPE: DI - LOOP VA 45, WORKING WIDTH: 4’500 MM, Web In-feed, Dilo Compensator 1, Hydac Hydraulic Power-pack, Dilo Patterning Machine, Dilo Compensator 2, Dilo Roll-up.Machines are in excellent condition
    https://royalwesta.com/product/dilo-needlepunch-patterning-structuring-machine-2/
  • AB08/150520D/ALC-RI/M/BJ/
    NONWOVEN WEBFORMING LINE, DOUBLE CARD and DOUBLE CROSSLAPPER
    NONWOVEN WEBFORMING LINE, DOUBLE CARD and DOUBLE CROSSLAPPER
    Quantity: 1
    Year: 1984 – 2016
    Max. Product width = 4200mm
    Fibre-feed: HDB Hopper with Spiky Lattice and Comb (year: 1984)
    DILO Belt- weigher (Scale) (year: 2016)
    HDB Scribbler Card
    Autefa Intermediate Cross-lapper (year: 2001)
    HDB Finishing Card
    Autefa Final Cross-lapper(year:2001)
    DILO Di-loom OD (year: 1991)
    DILO Compensator 1 (year: 1991)
    DILO Di-loom UD (year: 1991)
    DILO Compensator 2 (year: 1991)
    DILO Roll-up
    Temafa Selvage Shredder
    Installation is in very good condition, recently stopped and still fully installed.
    ELECTRICITY 400 V , 50 Hz
    https://royalwesta.com/product/nonwoven-webforming-line-double-card-and-double-crosslapper/
  • AF14/150520/
    Non Woven Plants
    Non Woven Plants
    Quantity: 2
    Composed by:
    Bessi carding machine w.w. mm 2500 single doffer, year 1980
    Temafa cross lapper inlet 30000 exit 2500 mm, year 1980
    pre-needling machine Dilo NFZ25 inlet 3000 delivery 2500 mm – nr. 2580 needles/lm
    2x Macchi longitudinal cutters
    1x Spinbau guillotine cutter
    1x Roller-up with scale and loading cells
    https://royalwesta.com/product/non-woven-plants/
  • AE51/060520/BY/
    Nonvowen Line
    Nonvowen Line
    Fine opener F.O.R. volumetric
    Year: 1989, Modernization: 2017, Working width 2.5 m

    Carding machine 2,5m F.O.R. max. 350 kg/h
    Year: 1993, modernization 2017

    Cross lapper HDB 2,5 m/ exit 2,5m
    Year: 1969, modernization: 2017

    First needle FEHRER NL9
    Year: 1971, working width: 2.4 m, 6 000 needles

    Needle machine FEHRER NL28
    Year: 1971, working width: 2.4 m, 12000 needles

    CALANDER IROTEH 2,5 m
    Pressing cylinder - 2

    Line for filc , 100% complete and working
    https://royalwesta.com/product/nonvowen-line/
  • AD26/260420/BY/
    Rolando Rotary Cutting & Pre Needle Loom
    Rolando Rotary Cutting & Pre Needle Loom
    AD26/260420E/RS-A.L/F/AQ/
    1x ROTARY CUTTER ROLANDO mod. RL14
    Year: 2000
    Working width 520 mm
    Inlet with pvc conveyor belt length 2200 mm
    Inlet grooved pressure cylinder with hydraulical pressure adjustment
    Blade holder disc diameter 600 mm
    2 rotating helical blades
    1 fixed counterblade
    2 rotation speeds 150 and 300 rpm
    Cutting length from 10 to 160 mm, variation of the length of the cut in relation to the feeding speed (variable) with motovariator
    Exit of the cut material on an inclined PVC conveyor belt driven separately by independent motor
    Electrical control panel 380 v 50 hz 3phase
    Installed motors:
    Hp 1.0 feeding conveyor belt
    Hp 6 / 7,5 motor drive blades
    Hp 1,0 exit conveyor belt
    Hp 0.5 hydraulic power unit
    AD26/260420E/YL-A.L/F/AQ/
    1x ROTARY CUTTER ROLANDO mod. RL14
    Year 2000
    Working width 820 mm
    Inlet with pvc conveyor belt length 2200 mm
    Inlet grooved pressure cylinder with hydraulical pressure adjustment
    Blade holder disc diameter 600 mm
    3 rotating helical blades
    1 fixed counterblade
    2 rotation speeds 210 and 420 rpm
    Cutting length from 10 to 160 mm, variation of the length of the cut in relation to the feeding speed (variable) with motovariator
    Exit of the cut material on an inclined PVC belt driven separately by independent motor
    Electrical control panel 380 v 50 hz 3phase
    Installed motors:
    Hp 1.0 feeding conveyor belt
    Hp 12,5 / 15 motor drive blades
    Hp 1,0 exit conveyor exit belt
    Hp 0.5 hydraulic power unit
    AD26/260420E/YL-A.L/F/BG/
    1x PRE-NEEDLE LOOM BY “2N”
    ITALY MOD. NS3000 / 33
    Year: 1995
    WORKING WIDTH: 2700 MM
    NEEDLE DENSITY: 3,333 NEEDLES / LINEAR M
    60 MM STROKE
    SPEED 800 RPM
    DC MOTOR OF 40 KW (STROKES)
    MOTOR INPUT 1.3 KW
    MOTOR OUTPUT 1.1 KW
    BATT INFEED SYSTEM TYPE 2BS
    ORIGINAL ELECTRICAL CONTROL PANEL
    TECHNICAL DOCUMENTATION
    SOME SPARE PARTS AVAILABLE
    3 SETS OF NEEDLE-BOARDS
    https://royalwesta.com/product/rolando-rotary-cutting-pre-needle-loom/
  • AB55/150420E/OOI-RL/M/AQ/
    Non-Wovens Spunbond Line 3500 mm , Full Mill
    Non-Wovens Spunbond Line 3500 mm , Full Mill
    FULLY RE-BUILT IN 2007
    Status : completely erected and connected
    Throughput: app 550-700 kg/h
    Polymer : PP
    Weights: 14-200
    Production Speed :avg 250 m/min ;max 300 m/min
    Finished Product Width: 3200 mm

    Technical Description – Line Component:

    2x Single Screw Extruder:
    Electrically heated complete of loading sistem for polimer and additives , semiautomatic screen changers controlle trhough and oleodinamic central station

    1x Single Screw Co-Extruder:
    Electrically Heated for the waste recycling

    2x Spinning beam oil heated:
    Placed back to back and each made of 32 spinpack

    2x Drawing and Quenching Chamber:
    Each with two side complete of smoke suction, quenching system for the filament, air balancing system and 64 jet per side for a total of 256 jet for the draw of the filament (Reconditoned in 2007)

    2x Beam: with 128 flaps each.

    1x WEB FORMATION Table: (Reconditoned in 2007)

    1x KÜSTERS Calender:
    Two roll oil heated complete of heating system

    1x FLEISSNER:
    Drum Drier 1-1414 complete with WEKO Impregnation Unit

    1x Winder:
    (A.Celli) with stocking station and Crane;

    1x Spinnpack Cleaning system: (Oven , Ultrasonic bath …);

    1x SET Spare JET

    1x Spare SET FLAP;

    1x Heater for the diatermic oil , elctrically fed , nominal power 240 kw ; serving the spinpack

    3x COMPRESSOR:
    For drawing unit model CENTAC C125MX1-2SLL pressione 2 bar/each, Kw 350;

    1x Cooling Tower model LSWA-X122B , kw 30.

    1x Chiller marca Klivet.

    Main Product Characteristics :
    High Mechanical Properties-Isotropy
    High CD values

    Main Line Characteristics :
    Short down time during production change
    small lots and different colors
    Denier change is very easy
    during production change
    Modular spinning design
    use of different material keeping the efficiency
    https://royalwesta.com/product/non-woven-machines-full-mill/
  • AC79/070420D/LTI-RI/F/BA/
    Melt Blown Production Lines(NEW MACHINE)
    Melt Blown Production Lines(NEW MACHINE)
    Quatity: 1
    Year : New Line
    Please find spec of line in PDF File.
    https://royalwesta.com/product/melt-blown-production-lines/
  • AA22/080420E/TLI/M/AV/ ( Sold )
    Reifenhauser Spunbond/Meltblown Line
    Reifenhauser Spunbond/Meltblown Line
    Makes inline production of 3-layer nonwoven made of thermoplastic polymers. Can be used for hygiene nonwovens as well as industrial nonwovens.
    Type: Reicofil 3.1 Width: 4200mm Year: 1995
    SMS spunmelt line for production of PP spunmelt, max line speed 420 m/min, basis weight range 8-70 gsm.
    Consisting of:
    Sysmetric gravimetric dosing system, max load of feed hopper 50 kg, max load on barrel feed opening 500 kg
    01 RT1651/1/180/30 single screw extruder for spunbond
    01 RT1651/1/150/30 extruder for meltblown (upgraded with new compressor drive in 2007)
    01 RT1651/1/180/30 single screw extruder for spunbond
    Total throughput of extruders roughly 1100 kg/hr
    02 HKS 120/70/0 co-extruders for re-feed of edge trim, capacity roughly 80 kg/hr
    Screen changer, melt spin pump, slot die with die pack, spinnerets (Reicofil) monomer extraction, quench chamber, Stretching channel, process air, Reicofil diffuser unit.
    Air suction system (for spunbond upgraded from AC to DC in 2007)
    Albany Copfa conveyor belt - length 31650 mm
    01 Andritz Küsters 412.50 thermobonding calender, 2 cylinders (one engraved and one plain) S-170 cylinders - upgraded from AC to DC in 2007.
    01 surfactant application unit
    01 infrared dryer
    Inspection camera vision system
    Edelmann inline winder including automatic core cutting unit and pull out device (upgraded in 2017 - change of all
    Drives and motors + Siemens S7 PLC controlled).
    The line is complete with all electrical cabinets and operational desks, as well as air flow system (air heat exchangers) for
    Both warm air and air for process and cooling systems.
    Line is still running.
    https://royalwesta.com/product/reifenhauser-spunbond-meltblown-line-2/