Non-woven;all ( Moquete, Layers, Geo-textiles, Hygiene, Others )

1–30 of 52 results

  • AB08/160919E/API-RI/F/BJ/
    NON WOVEN LINE FOR POLYESTER
    NON WOVEN LINE FOR POLYESTER
    YEAR 1996 – 2002
    USED FOR STANDARD POLYESTER PRODUCTS IN WEIGHT RANGE FROM 150gsm TO 600gsm
    CONSISTING OF:
    1 X BEMATIC CARD, TYPE BSS, MODEL BHL 2500 – 3000, 2002
    WIDTH: 3’000MM, FEEDING UNIT, SINGLE DOFFER, DOUBLE RANDOMISER, CAPACITY: 650 KG / HOUR
    1 X TEC TEX CROSS LAPPER
    INPUT WIDTH: 3’000MM, OUTPUT WIDTH: 4’500MM, SPEED: 40 M / MIN
    1 X 2N NEEDLE LOOM TYPE NS 3000, 1996
    WIDTH: 4’200MM , HERRING BONE BOARD, SINGLE DOWN @ 1’500 NEEDLES
    1 X ROLLING AND CUTTING MACHINE
    4 X LONGITUDINAL SLITTERS and X CUTTER
    Status: machines were recently stopped but still fully installed.
    https://royalwesta.com/product/non-woven-line-for-polyester/
  • AA22/130919E/LSL/F/AE/
    Hergeth/Olbrich/Strahm Random Airlay Line
    Hergeth/Olbrich/Strahm Random Airlay Line
    Year: 1980-2012
    Width: 2500mm
    EL: 380/3/50
    Complete thermobonding line producing low and high density material (from 15 to 120 kg/m³) out of cotton shoddy, wool or other waste fibers. Line is especially designed for producing absorbent panel out of shoddy cotton, insulating panel out of wool, heavy density mattresses out of manmade fibres. Switch over time from one product to another is possible without stopping the line. Line is very versatile and have test run on 50 different fibers.
    Line consists of:
    1 x Fallgarter bale breaker from app. 1975 with new (2010) Temafa condensor for material feeding
    1 x Rolando balebreaker from app. 1985 with new (2010) Temafa condensor for material feeding
    2 x Crosa Perino Blending boxes each for 750 kgs of fiber from app. 1990. the units also has individual metal separator
    1 x LTG air drum filter from 2005 incl. Main ventilator (installed effect 45 kW), fiber separator, prefilter tower, fiber compactor, dust separator and exhausting silencer. All covered in a separate enclosure.
    1 x HDB carding willow from app. 1975
    1 x Hergeth fine opener from 1983
    1 x Stummer cleaner from 2007
    1 x Hergeth chutefeed system with tower
    1 x Olbrich airlay card from 2010 with automatic weighing system for a production between 500 and up to 6 000 grams/sqm.
    1 x Strahm thermal bonded oven type HiPer Thermo from 2008 with adjustable height up to 300 mm, gas heated.
    1 x Olbrich length cutting device from 2004 with 6 knifes installed
    1 x KZE guillotine cutter from 2012 for cutting up to 170 mm thickness and with measure system.
    1 x Atlas Copco air compressor 4,8 KW from 2001
    Totally installed effect is 320 kW. Most of the motors are frequency controlled. Can also without major changes run on 440/110 volt 60 hz.
    The whole line is only run for commissioning. To keep it fit it runs minor hours every week to keep all equipment in an excellent condition.
    Line will be sold including all accessories to serve needed utilization system.
    https://royalwesta.com/product/hergeth-olbrich-strahm-random-airlay-line/
  • AE84/060919E/LA-T/M/BS/
    Fehrer Needle Punch Machine
    Fehrer Needle Punch Machine
    Quantity: 1, Year: 1998, Model: NL6 S, Needles: 1500/m, Working width: 4000mm, Machine in good condition
    https://royalwesta.com/product/fehrer-needle-punch-machine/
  • AA02/030919/
    Non Woven Mat Forming Line
    Non Woven Mat Forming Line
    AA02/030919D/CY/F/
    1x OMMI Feed Hopper Opener:
    Year: 1987
    with Hollingsworth MTO
    Working Width 1600mm
    AA02/030919D/RT/F/
    1x Temafa Feed Hopper Opener
    Year: 2007
    Working Width 1600mm
    AA02/030919D/YP/F/
    1x Fiber Controls 4 Hopper Weigh Pan
    Year: 1987
    BlendLine / 60"
    Inclined Spiked Aprons
    Fiber Controls D 147x54 Condensor
    AB 1000 Control
    AA02/030919D/AP/F/
    1x Hergeth BlendLine Hopper Feed Chute
    w/Weigh Pan
    AA02/030919/
    1x Befama Volumetric Feeder
    Year: 2000
    Fiber Reserves
    AA02/030919/
    1x Garnett Controls Card Feeder
    Year: 2000
    Model Rollaweigh
    Working Width 2500mm
    Weight Control
    AA02/030919D/ASL/F/
    1x Befama Double Doffer Card
    Year: 2000
    Working Width 2500mm
    Net Through put 2000lbs per hour
    AA02/030919D/YP/F/
    2x Befama CrossLappers
    Year: 2000
    Input Working Width 2.8 meter
    Working Width 3500mm
    Input speed 100 mpm
    AA02/030919D/SP/F/
    1x Fehrer Needle Punch Finish Loom
    Year: 1997
    Working Width 2400mm
    Model NL 9/S
    Single Board Down Stroke
    AA02/030919D/CY/F/
    1x Multiple Three Head Slitter
    Year: 1997
    Working Width 2400mm
    Nip Roll Stand/Trim Guide Rolls
    Top and Bottom Blades 6" Diameter
    2 Roll Surface Wind Take-Up
    AA02/030919D/CY/F/
    1x Wise Industries Regrinder
    Working Width 48"
    15 hp Blower
    https://royalwesta.com/product/non-woven-mat-forming-line/
  • AA22/150819/
    Spinnbau/Automatex Needlepunch Line
    Spinnbau/Automatex Needlepunch Line
    Year: 1997- 2013
    Width: 5300mm
    consisting of:
    -04 bale-openers, ww: 1500 mm, extended inlet conveyors and new electronic weighing system installed in 2016.
    -01 Ommi Automatic Combo stack reserve, yoc: 2000
    -01 Spinnbau card, ww: 2500 mm, yoc: 1995, breast with 3 workers/strippers, transfer cylinder, main swift with 3 workers/strippers, exit in double doffers with condensor rolls, max capacity between 680 - 800 kg/hr, depending on fiber type.
    -01 Automatex FA/3000 TC crosslapper, yoc: 1997, with AC drives, ingoing 2500 mm / outgoing 5500 mm.
    -01 batt drafter, 12 cylinders
    -01 Automatex PR-100/T pre-needler, yoc: 1997, 60 mm stroke height, ww: 6100 mm
    -01 drafter, 5 cylinders
    -01 Automatex AG 154/TB finishing needler, 4 boards, 50 mm stroke, yoc: 1997, ww: 6100
    -01 four-cylinder stretcher
    -01 metal detector
    -01 Entex heat-setting stenter with vertical IR heat banks, yoc: 1997
    -01 winder, yoc: 1997
    -01 E&L SE guiders, yoc: 2013
    -01 Entec winder, yoc: 1997
    https://royalwesta.com/product/spinnbau-automatex-needlepunch-line/
  • AA22/150819E/TRO-YC/M/AR/
    Nordmeccanica Complete Coating And Lamination Line
    Nordmeccanica Complete Coating And Lamination Line
    Type: Triplex SL - L1500 Matic
    Width: 1500mm
    Year: 2012
    Complete solventless coating and lamination line capable of laminating three films or sheet webs coming from three separate unwinders, while coating two of the film webs with solventless adhesive and re-winding the laminated material, consisting of:
    01 x turret unwinder - max dia 1016 mm, with automatic splicing - 5-88 PLI tension, edge guide, corona treatment
    01 x solventless 5-roll coating head with World mixer
    01 x turret unwinder - max dia 1016 mm, with automatic splicing, edge guide, corona treatment
    01 x laminator and 01 x solventless 5-roll coating head with World Mixer
    01 x turret unwinder - max dia 1016 mm, with automatic splicing, edge guide, corona treatment
    01 x laminator
    01 x turret re-winder - max dia 1016 mm with automatic roll change
    Maximum speed: 396 m/min.
    Complete with Siemens AC motors and drive system, Siemens PLC, HMI, all software on back-up, all documentation and drawings.
    Only 6000 running hours and located in an ISO Certified Food Grade Operation.
    Condition as new
    https://royalwesta.com/product/nordmeccanica-complete-coating-and-lamination-line/
  • AA22/150819/
    Autefa Crosslapper
    Autefa Crosslapper
    Quantity: 1, Type: Topliner CL4000, Outgoing width: 4000mm
    https://royalwesta.com/product/autefa-crosslapper/
  • AA22/150819/
    Hergeth Hollingsworth Crosslapper
    Hergeth Hollingsworth Crosslapper
    Quantity: 1, Type: F 6.430, Ingoing width: 2500mm, Outgoing width: 3500mm, Inlet speed up to 70 m/min, Outlet speed up to 20m/min
    https://royalwesta.com/product/hergeth-hollingsworth-crosslapper/
  • AA22/150819E/RP-R/M/AO/
    Asselin Finishing Needle Loom
    Asselin Finishing Needle Loom
    Quantity: 1, Year: 1991, Type: 4E.16.DF, Width: 5350mm, EL: 380/3/50, Originally 4 boards - up and down, but working only as a 2 board upstroke loom, because the 2 x down modules have been taken out. Max stroke 1335 per minute, Stroke 60 mm, 4 x 4200 needles/linear meter.

    https://royalwesta.com/product/asselin-finishing-needle-loom/
  • AA02/310719E/OSP/F/AN/
    Complete 5.6 Meter Needle Punch Line
    Complete 5.6 Meter Needle Punch Line
    Fiber Preparation:
    1x 3 Component Opening and Mixing Lien by IKS
    with Blending Bin
    Year: 2009
    1x Bale Breaker by ABA
    Year: 2004
    Working width 3500 mm
    1x Card Willow By Rolando
    Model KWN
    Year: 2004

    Carding:
    1x F.O.R Double Doffer Carding
    Model DV 680-2500
    Year 1997
    Working width 2500 mm

    Cross Lapping:
    1x Cross Lapper by Technoplans
    Model CL 2555.OC
    Year 2004
    Input 2500 mm,
    Output 5700 mm
    PLC Control Panel

    Needle Looms:
    Pre Needle
    1x Technoplans Pre-Needle Loom
    Model PRN.55.DU.50.FS
    Year 2004
    Working width 5500 mm
    Up & downstroke 5000 Needles Lin Meter
    With CBF Feed, Type FG.5500
    PCL System, Computer Control

    Finisher:
    1x DILO Quad Punch Finisher Needle Loom
    Model OUG II 55
    Year 2006
    Two Boards up and two Boards down
    Working width 5500 mm
    16.000 Needles per lin meter

    Winding:
    1x Cross and Length cutting unit by Technoplans
    Model AC.55.P.20
    Year 2004
    Working width 5500 mm
    1x Big Batcher and Scale by Technoplans
    Model WM.55.S.A.P.
    Year 2004
    with Temafa Cutter
    1x Winder
    with Press Device
    with Throw-Off Device
    with Bandage Device
    Clip Arms on the side

    Available: Immediately
    https://royalwesta.com/product/complete-5-6-meter-needle-punch-line/
  • AC52/110419/CV/
    Very HIGH QUALITY and Nice Complete Non-Woven line
    Very HIGH QUALITY and Nice Complete Non-Woven line
    Incl Impregnation, - and Thermo Fixation for ‎many now woven applications, Flame Protection as Automotive and other‎.
    THIBEAU CARDING MACHINE
    MANUFACTURER: THIBEAU (FRANCE)
    SERIE: CA 10‎
    MODEL: 225PP
    YEAR: 1997
    WORKING WIDTH: 2500mm
    DELIVERY SPEED UP TO 70m/min
    PRODUCTION CAPACITY APPROXIMATELY 450 KILOGRAMS PER HOUR
    DOUBLE DOFFER
    INCLUDING SERVO X , SEREL LAP DENSITY CONTROL SLDC
    WEIGHTING SYSTEM
    FEEDING BY ORIGINAL THIBEAU CHUTE FEED, YEAR 1997‎
    PLC CONTROL

    CONNECTED TO ASSELIN CROSSLAPPER,
    TYPE: ELITE
    YEAR: 1997‎
    INPUT WIDTH: 3000 MM
    OUTCOME WIDTH: 3000 MM

    CONNECTED WITH ASSELIN NEEDLE PUNCHING MACHINE A50‎
    WW.: 2600 MM
    STROKE: 60 MM
    MAX. ROTATION SPEED: 1600 TR/MN
    MAXIMUM CONTINIOUS ADVANCE: 35 M/MN
    MINIMUM PITCH: 2 MM
    MAXIMUM PITCH: 16 MM
    ‎17 000 NEEDLES / M‎

    CONNECTED TO AUTOMATEX NEEDLE PUNCHING LOOM
    WW: 2600 MM
    ‎17 000 NEEDLES / M‎
    ‎ ‎
    CONNECTED TO ROLLING AND CUTTING INSTALLATION
    ASSELIN
    YEAR:: 1997‎
    TYPE: COUPE TRANSVERSALE
    TYPE: EN ROULEUR
    YEAR 1998‎
    ‎ ‎
    INCLUDING METAL DETECTOR S+S

    ALL MACHINES IN EXTREMELY WELL MAINTAINED CONDITIONS STILL ON MILL FLOOR

    bonding / flame lamination installation:‎
    Manufacturer: Traversi & Armenti (Italy)‎
    Type: ACCS 2050‎
    Year: 2003‎
    Cylinder width: 2100 mm (ww.: 2000 mm)‎
    Conditions: excellent
    Short process description:‎
    By flame-lamination one understands the making of a compound of 2,‎
    resp. 3 components (single-, resp. sandwichlamination) by using the‎
    adhesion characteristics of the foam which is melted by the line-gasburner.‎
    A line-gasburner which is installed across the whole working width, is
    melting the foam, resulting in an adhesive film. Inside the calander, the
    foam and the top fabric, resp. the backlining are permanently joined
    together when running through the laminating gap.‎


    Thermobonding Calender Ramisch Kleinewefers RKK 230‎
    Manufacturer: Kleinewefers KTM ( Germany )‎
    Year – 1994 (Autefa machine plate, explain)‎
    Set consists of:‎
    double-roller calender
    hydraulic and oil installation
    desk and control panel
    Specification:‎
    nonwoven: PP, PES, PA and blends needle nonvoven
    grammage 30 – 150 g/m2‎
    nonwoven max width – 2200 mm‎
    max width after calendering and cutting the edge of nonwoven - 2000 mm‎
    working speed
    PA nonwoven 100 – 150 g/m2 – max 10 m/min
    PP and PES nonwoven 30 – 100 g/m2 – 15 -50 m/min‎
    working pressure range 100 N/mm
    heating factor - heating oil
    driving power - ( steel and coolling rolls,hydraulics, lubrication ) - about 24 kW
    including relaxing table station Autefa
    including cutting installation
    including lifting installation for rolled beams
    Complete Artos PB gas oil heating unit, including all neccessary safety valves .‎


    PB gas stenter frame

    including impregnation padder and steel calander for non – woven fabric:‎
    Manufacturer: Santa Lucia (Unitech-Italy)‎
    Type: Red
    WW.: 2200 mm‎
    Gas burners: 5 each side totally 10‎
    Chambers: 5 x 3 m x 4 m‎
    Chain: pin and clip
    Impregnation foulard
    Complete kitchen preparation unit for foulard
    Exit through the cold stainless steel calander on big batch roll
    https://royalwesta.com/product/very-high-quality-and-nice-complete-non-woven-line/
  • AB53/200319E/AOL-S/C/AQ/
    Non Woven Line
    Non Woven Line
    1) Bonino carding machine ww 2500mm, machine without pit
    hopper feeder,breast roller Ø 1250mm,with n°5 workers Ø210mm,n°5 strippers Ø67,5 mm
    main cylinder drum Ø 1500mm, with n°6 workers and n°5 strippers
    combing doffer Ø 1500

    2)Folding machine with enter 2900 mm and exit 4000 mm (from 2900 to 4000, lenght adjustable)

    3) Loom Malimo Texima Mod.MALIWATT, ww 3700 mm, gauge 14

    This non woven line year of costruction 1980/1982, actually is still in prodution in the mill floor
    https://royalwesta.com/product/non-woven-line/
  • *AB55/150319/AQ/
    Nonwoven Line
    Nonwoven Line
    Made of 3 lines for final product in 3000 meter ww:
    - 1 quilting line ( For card + crossleppard + Mammuth quilting)
    - 1 wadding line made of For card +crossleppard + Tomes Thermofusion Belt oven
    - 1 needleloom line made of FOR Card + Crossleppard + Fehere neeloom NL36 ( two boards stroke from up/down)
    - Complete Mill in production till 31.01.2019. ; still connected anf in running condition
    https://royalwesta.com/product/nonwoven-line/
  • AB34/070319/AZ/
    Cenaro 3 Rollers Thermobonding Calender For Non-Woven
    Cenaro 3 Rollers Thermobonding Calender For Non-Woven
    Quantity: 1, Year: 2015, type: JX9
    Working width: 1200 mm, rollers width: 1300 mm
    Calender is designed for finishing of nonwovens with a basis weight of 20 g/m² to 300 g/m²
    Technical data:
    3 steel rollers with diameter: 300 mm each
    working width: 1200 mm
    rollers width: 1300 mm
    temperature of rollers: max 200 °C
    Rollers pressure: max 50 kN/m (50 kG/cm)
    Speed. 0,8 - 19 m/min
    Hydraulic pressure of the rollers, using 4 cylinders (two on the upper shaft and the lower shaft, independent control)
    cylinder diameter 63 mm
    Max. working pressure in hydraulic system 12 MPa
    These hydraulic cylinders powered by HL-46 hydraulic power (driven by an electric motor)
    The heating of the shaft I and shaft II is three-zone, the lower shaft is not heated
    Heating power of the shaft main zone: 7.2 kW
    Heating power of each of the two side zones 1.2 kW
    Total heating power of both shafts 19.2 kW
    Calender has a winding device equipped with a metering sensor measuring the length of the web in the web. The largest diameter of the filament is 400 mm
    Total power installed in calender is 21.8 kW
    Calender has a control cabinet with operator panel
    External dimensions of calender:
    width - 3335 mm (with 3665 mm control cabinet)
    length - 1340 mm (with control cabinet 1645 mm),
    calender height - 2295 mm
    https://royalwesta.com/product/cenaro-3-rollers-thermobonding-calender-for-non-woven/
  • AB55/220918E/YO-R/C/AZ/
    Hergeth Cross lapper
    Hergeth Cross lapper
    Quantity:1, Year:1995, total mechanical and electrical renovated: 2017, new control cabinet, width input: 2200mm, width output: 3000mm, working speed: 60 m/min, installed power: 10 kW, 380 V, 50 Hz, technical condition as new, The machine is installed, in worked condition and can be checked / tested at any time.
    https://royalwesta.com/product/hergeth-cross-lapper/
  • AA02/220219/AR/
    Fehrer Geotextile Nonwoven Line
    Fehrer Geotextile Nonwoven Line
    1 x Custom Built Accumulator
    Counter Weight Type, 7 Meter Width, 80 Foot Capacity, Year:1994
    Recorded line Productio Speed:20 meters per minute running fabrics 3.8 to 18 oz per square yard
    AA02/220219D/ASL/F/AR/
    1 x Hergeth Card
    Type 6.345/171046, 2.5 Meter Width, Swift and Breast each with, 4 workers and 4 strippers, , Double Doffer, Year:1992, 2100 Lbs per hour Capacity, Fiber Controls Feeder, Model TYP 99x96, Year:1997
    AA02/220219D/YL/F/AR/
    1 x Asselin Profiling Crosslapper
    Series 658, 2.5 Meter Input, 6.8 Meter Laydown, 120 Meters/ Minute, Year:1994
    AA02/220219D/OL/F/AR/
    1 x Fehrer Tacker NeedleLoom
    NL 9, Downstroke, 60mm Amplitude, 2658 needles per linear meter, 1325 strokes per minute, 7.4 Meter Width, Year:1994
    Includes:1 Fehrer Feed System, Model FFS, 7.2 Meter, Year: 1994
    AA02/220219D/AOL/F/AR/
    1 x Fehrer NeedleLoom
    NL 42, 7 Meter Width, Quad, 2 Boards Up & 2 Boards Down, 70mm Amplitude, 9702 needles per linear meter, 1100 strokes per minute, Year:1994
    AA02/220219D/CS/F/AR/
    1 x Custom Built Accumulator
    Counter Weight Type, 7 Meter Width, 80 Foot Capacity, Year:1994
    https://royalwesta.com/product/fehrer-geotextile-nonwoven-line/
  • AA22/250119/BR/
    Dilo Needle Loom For Endless Felt
    Dilo Needle Loom For Endless Felt
    Quantity: 1, Year: 1987, Type: OD-OR 40, Width: 4000mm, EL: 380/3/50
    For manufacturing of endless nonwoven felt with possibilities for addition of other carriers before needling
    Consisting of:
    1 x un-wind station for additional carrier material including overhead cranes for handling conveyors and rolls
    1 x Dilo OD-OR40 needleloom from 1987, needle throw beam 80 mm, advance range 0-62 mm, stroke speed 600 rpm, exit in
    2 x pneumatic pressing devices independently adjustable to guide the material, variable for following production settings:
    Exit take-off station one, 300-500mm diameter, Exit take-off station two, 500 mm and up with a max laying area of 15 meter

    https://royalwesta.com/product/dilo-needle-loom-for-endless-felt/
  • AA22/250119/AY/
    Dilo Pre Needle Loom
    Dilo Pre Needle Loom
    Quantity: 1, Year: 1972, Type: SD 25, Width: 2500mm, EL: 380/3/50, single board, Downstroke, 800 strokes/min, Stroke height 40 mm, 2000 needles/lm

    https://royalwesta.com/product/dilo-pre-needle-loom/
  • AA10/230119/
    Card and Cross Lapper
    Card and Cross Lapper
    1 line with card and cross lapper, Year 2001,
    Comprising: 1 TECNOTEX Card Type CARDA 2P, width 3,60 m, Double doffer (dia. 485 mm), drum dia. 1500, Delivery on AUTOMATEX Cross Lapper, Entry 3.70 m, delivery 4 m, Effective speed 70/80 metres /minute, Production of card 650 kg /hour
    https://royalwesta.com/product/card-and-crosslapper/
  • AA22/250119E/ALL-AI/C/AR/
    Dilo Finishing Needle Loom
    Dilo Finishing Needle Loom
    Quantity:1, Year:1993, Type: UD II S60, Width: 6000mm, 4 boards - upstroke, 35 mm stroke, max 1800 strokes/min, Needle density 5200 needles/linear meter x 2 = 10,400 total per linear meter, Ran 120 - 1000 gsm products.
    https://royalwesta.com/product/dilo-finishing-needle-loom-2/
  • AB54/231118/AG/
    HDB card
    HDB card
    Quantity:1, Year: 1995, Model: F8221 , Width 250 cm, 224 (14x4x4) good ends of 10mm, Crosslaper, 2 bodies of 2 big cylinders of 150cm with crosslaper each.
    https://royalwesta.com/product/hdb-card/
  • AA07/041118/
    Baby Diaper Plant
    Baby Diaper Plant
    DETAILED SPECS AND PICTURES AND VIDEOS ARE AVAILABLE.‎
    https://royalwesta.com/product/baby-diaper-plant/
  • AA10/021118E/ATI-AI/M/AP/
    Non-Woven line for pillow manufacturing
    Non-Woven line for pillow manufacturing
    Quantity:1, which can be sold separately, consisting of: 1 FOR Card, year +/-1988, width 3 m, double doffer, comprising: 1 Weighing hopper-feeder, 2 Drums dia. +/- 1400 mm, Double doffers dia. +/- 500 mm, Delivery on FOR cross lapper, width at exit 3.80 m, wooden slats, 1 Spraying cabin, 1 Dryer width 2.80 m, 1 ASSELIN Transversal cutter, 1 KINNA webbing roller, year +/-2000 Type KK116-7, width 2.80 m, 1 KINNA webbing roller, width 1.10 m, 2 Manual filling stations. The card can produce +/- 450 kg/hour according to material used
    https://royalwesta.com/product/non-woven-line-for-pillow-manufacturing/
  • AF14/051018/
    Non Woven Plants
    Non Woven Plants
    N. 1 Felt non-woven plant composed as follows :
    1 BONINO carding machine w.w. mm. 2800 single doffer complete with Hopper feeder
    1 Cross lapper entry up to 3200 mm. – delivery 3200 mm.
    N. 1 Sicam oven 2 fields w.w. 2400 mm – calender and cooling system at delivery
    N. 2 Bessi carding machine w.w. 2500 mm with hopper feeder Temafa
    N. 2 Autefa cross lapper inlet mm 2500 – delivery mm 3000
    N. 1 Dilo pre-needling machine mod. NFZ30 – w.w. mm 3000 – n. 5160 needles/mtl
    N. 1 Dilo pre-needling machine mod. NFZ25 – w.w. mm 2500
    N. 1 Dilo needling machine mod. OD1125 w.w. mm 2500 – n. 4000 needles/mtl
    N. 1 Dilo needling machine OD 11 w.w. mm 2500 – n. 5750 needles/mtl
    N. 4 Macchi longitudinal cutting machines
    N. 2 Autefa/Spinbau transversal cutting machines w.w. mm 2500
    N. 2 Roller up with electronic scale
    https://royalwesta.com/product/non-woven-plants/
  • AA10/260918/
    ASSELIN Cross lapper 390
    ASSELIN Cross lapper 390
    Quantity:1, Year:1989, Feeding : 2.90 m, delivery 4.15 (or 4.50 m)
    https://royalwesta.com/product/asselin-cross-lapper-390/
  • AA22/270918E/OCL/F/
    STP Impianti Spunbond line
    STP Impianti Spunbond line
    Quantity:1, Year:2000-2005, Width: 1500mm, Complete SSS triple-beam spunbond line including off-line slitter. Max capacity 300 ton/month, but average running 250 ton/month, but depending also on mix of GSM, speed from 300 m/min @ 10 gsm to 20 m/min for 190gsm, net fabric width 1500 or 1400 mm if desired, running 10-190 gsm, dtex 1.8 - 2.2, consisting of: Moretto polymer feeding and Jonix volumetric dosing system, two per spinbeam (color masterbatch + additive), 24 spinpumps in total (8/beam), 66 individual spinnerets in total, 216 holes each - dia 0.6 mm, Comerio CAL NT 410x2000 calender, electrically oil-heated, two cylinders - one engraved with diamond pattern and one smooth - cylinder dia 410 mm for both cylinders.Celli AC4-Windy winder, Testa Rossa 113 JT EK1 off-line automatic unwinder and slitter/rewinder, yoc: 2005, 2 slitting knives and semi-automatic crosscut, max ingoing width of roll is 1700 mm - max diameter 1500 mm and 800 kg weight.Atlas Copco ZA200 air compressor. Eurotherm inverters, Dynisco pressure controls and Euroterm temperature controls.Total power consumption 420 kW
    https://royalwesta.com/product/stp-impianti-spunbond-line/
  • AF29/140918E/SL/F/AS/
    Polyester Wadding Spraybonding line
    Polyester Wadding Spraybonding line
    2 burners Riello, Cutter, and Roller, All Electronically PLC and Inverter controlloed, Capacity 150 Kg / hour polyester spraybonded wadding, 60 gr to 250 gr weight, Max 250 cm width, with many spare parts, SINGLE MACHINE SALE IS POSSIBLE.
    NOTE: FOR Card was completely refurbished in 2007 and 2015. All Card Clothings were renewed, Motors changed with Inverter control, Bearings, Belts, and Chains were changed as well.
    AF29/140918E/YI-L/F/AS/
    FOR 2,5 phase Card, 250 cm width, Model 1985
    AF29/140918E/RI-L/F/AS/
    Cross Lapper build locally
    AF29/140918E/RL-L/F/AS/
    Oven 2 sections built locally, 3 layer 7 meter long
    https://royalwesta.com/product/polyester-wadding-spraybonding-line/
  • AF14/050918E/CR-A.L/F/BY/
    Rolando Cutting Machine
    Rolando Cutting Machine
    1 x ROLANDO rotary cutting machine in w.w. mm. 800 + grinding machine
    https://royalwesta.com/product/rolando-cutting-machine/
  • AB55/020918E/CO.S-R/C/AZ/
    Falubaz Willow
    Falubaz Willow
    Quantity:1, Year:1987, renovated 2013 and 2018, Power: 500 kg/h, Working width of belt conveyor: 1200 mm, including a fan, reversing lever and tubs, installed power: 20 kW, 380 V, 50 Hz, control cabinet: new, Current state: running, Condition: very good
    https://royalwesta.com/product/falubaz-willow-2/