Showing all 39 results

Show sidebar

AG52/150324D/ASY-AY/M/BS/

Muratec Vortex 870 Spinning

Quantity: 10
4x Year: 2015 (96 spindles), 2x Year: 2014 (88 spindles), 4x Year: 2017 (96 spindles)
All machines still running.
All machines have same technical configuration with 3 robots , and just ones year 2017 have additional equipment for filament.
Machine Hand: RHS (1 machine) + Left (1 machine), Spindle Type: Orient, Spindle Size: 1.2, Conicity: Cylindrical, Traverse: 6″, Feed Can Size: 20″ or 24”, Doffers: Available, Yarn Joining: Splicer, No Of Splicer: 3, Clearer Type: MSC, Crown Attachment: Not Available, Nozzle Type: Orient, Waxing: Available, Hot Air Exhaust: Upward, Waste Fibre Extraction: Automatic, OHTC: Available, Voltage: 440, Frequency: 60, Material Process: Polyester/Cotton, OHTC Make: Pneumablo, Control Panel: VOS II.
Machines have no Polymaster but are doing Polyester/Cotton Fibers.

AE30/070324D/CYO-AO/F/BA/

Rieter G32 Ring Spinning Linked to Savio Winder

30x Rieter G32 Ring Spinning Frames
Year: 2018, 1632 Spindles, with auto doffing
Linked with: Savio winder
Year: 2018, Model: ECO PULSARS I, No of spindles: 32, Zenit yarn clearer.

AG52/050324/BS/

Rieter G35 Spinning Frames & Schlafhorst Autoconer

5x Rieter G35 Spinning Frames, Year: 2008, 1632 Spindles, 18.5 mm – 210 mm – 42 mm , Automatic, 440V/60Htz.
Linked to:
5x Schlafhorst Autoconer AC5, Year: 2008, 34 Spindles.

AB45/140224/

RIETER RING SPINNING FRAMES G 33

Quantity: 2, Year: 2000, Model G33 , 1200 spindles,
automatic doffing, Gauge mm 70, Ring diameter 42 mm Bobbin Length mm 220
Drafting Rieter Type P3-1, Cradle Size in mm Short – 36
Blower Electrojet , 440V 60 HZ
Condition: Erected till middle of January 22

AB08/120224/

TOYOTA RING FRAMES LINKED WITH SCHLAFHORST 338 WINDERS

TOYOTA RINGFRAMES LINKED WITH SCHLAFHORST WINDERS
Quantity: 3
Year: 2007
Type: RX240 E
No. Of spindles: 1008
Spindle gauge: 75 mm
Drafting: Toyota 3 over 3
Cradle size: 36
Ring dia: 2 x machines 36mm, 1 x machine 38mm
Wharf dia: 20mm
Bobbin length: 205 m
Pneumafil suction: Per spindle. Left and right side ducts to suction boxes
Doffing: Automatic
Bobbin conveying: By caddy
Overhead cleaner: Pneumablo
Spindle yarn cutting: Yarn break sensor per spindle with indicator lights
Roving stop: Yes
Roving creel: 2 line in production, 1 line spare bobbins

LINKED with

AUTOMATIC CONER WINDER SCHLAFHORST
Type: 338 V
Year: 2004
No. of heads: 26 per machine
Conicity: 4 degree 20 min
Grooved drum 2 turns variable step: 2 turns
Thermo splicer: yes
Waxing device: Yes
Type of clearers: Uster Quantum
Overhead cleaner: Sohler

TOYOTA RINGFRAMES LINKED WITH SCHLAFHORST WINDERS
Quantity: 3
Year: 1997
Type: RX240 E
No. Of spindles: 1008
Spindle gauge: 75 mm
Drafting: Toyota 3 over 3
Cradle size: 36
Ring dia: 2 x machines 36mm, 1 x machine 38mm
Wharf dia: 20mm
Bobbin length: 205 m
Pneumafil suction: Per spindle. Left and right side ducts to suction boxes
Doffing: Automatic
Bobbin conveying: By caddy
Overhead cleaner: Pneumablo
Spindle yarn cutting: Yarn break sensor per spindle with indicator lights
Roving stop: Yes
Roving creel: 2 line in production, 1 line spare bobbins

LINKED with

AUTOMATIC CONER WINDER SCHLAFHORST
Year: 2004
Type: 338 V
No. of heads: 26 per machine
Conicity: 4 degree 20 min
Grooved drum 2 turns variable step: 2 turns
Thermo splicer: yes
Waxing device: Yes
Type of clearers: Uster Quantum
Overhead cleaner: Sohler

Machines are in excellent condition and 100% complete.

AC09/230124D/CRR-AL/M/BA/

Muratec Vortex 870 MVS Air Jet Spinning

Quantity: 2, Year: 2013, Model : Vortex 870 MVS, No Of Spindles : 96,Traverse : 6″
Doffers : 1, Splicer Nozzle Prism : G2Z, Clearer Type : MSC
Waxing : Available, OHTC Make : Muratec
Conicity : 4″20”, No Of Splicer : 4 carriages

AB46/180124/

Muratec Vortex MVS 861 Machines

Quantiy: 1, Year: 2010, Model MVS861 vortex
With Polymaster., No of Splicer 2 Carriages, Nozzle Type STAR, Waxing with (diam 15mm), Voltage 440V 60Hz

AG52/170124/BS/

Muratec Vortex 861

Quantity: 6, Year: 5×2009 – 1×2008, 80 positions, Spindle Type: Super Fat, Left Hand, Conicity: 4’20, Traverse: 6 inch, Feed can size: 18-20 inch (4lines), Doffers: 86D (1set), Yarn Joining: Air Splicer, 03 splices, Clearer type: MSC (basic), No crown attachment, Nozzle type: ECO Nzl, Needle Holder type: 2PZ L8-8.8, Break Draft Wheel: 30t, Control panel: VOS2, With waxing, Hot air exhaust: from Mac to Ceiling, Waste fibre extraction: Individual, OHTC: Individual, 380 V, 60Hz., Material process: Viscose, Splicer nozzle prism: G2Z, OHTC make: Muratec.Machines stopped.
Machines does NOT have polymaster.
(Download PDF file to see list of spare parts)
Machines are in a very good condition, ready to run. All completes, can be start up during an inspection.
ALL 6 machines for sale as one lot.

AH27/100124D/COL-AO/F/BA/

Murata Vortex 870 Spinning

Quantity: 4, Year: 2017, 96 spindles, Including the ploymaster, 2 machines need 3 container, total 6 container. See PDF Docs for complete details.

AD22/040124D/YI-Y.AII/F/

Rieter K44 Ring Spinning Linked to Savio Orion Autoconer

Quantity: 20, Year: 2004, 1008 spindles each set, Savio Orion Auto Corner, 24 spindles, Spindle Gauge 70 mm, Spindle CS-18, Roller 27, Pneumatic cradle, Stopped in the mill floor.

AC63/061223D/OI-AL/C/BO/

Rieter J10 Machines (Airjet)

Quantity: 5, Year: 2010, Uster Quantum 2, Spindles: 100 / machine, Robots: 4 / machine, Running Models: Viscose / Model, Speed: 400m/ min – Take up maxspeed – 450m/ min, Cones: Cylindrical, Length of fibers 27-40mm, Application Range: Cotton, Synthetic, Staple Fibers, Bobbin Outer Diameter: 300 mm, Bobbin Inner Diameter: 54 mm, Traverse: 150 mm, Angle of Intersection: 15-46°, Plate of the Can: 20 mm, Exhaust: Downward, Traverse: 150 mm, Piecing by Robot, All Draft, Break Draft are direct digital entry no gears, Voltage : 380 V / 50 Hz, Machines are still running in the best spinning mill.

AG52/041223D/RO-O/M/BS/

Marzoli NSF-4 Spinning Machines

Quantity: 2, 2 complete sets (1 set = spinning machine + autoconer), Year: 2000, 1200 spindles, escarte 70 mm.
linked with Autoconer Murata 7V-II 24 fuses, purgator Uster Quantum, Year: 2003.

AF54/011123/BF/

Toyota Ring Frame Linked to Murata Winding

Toyota Ring Frame:
Quantity: 9, Year: 2005, Model RX240SF-1200, 1200 spindles, Spindle gauge 70 mm., Bobbin length 180 mm., Spindle wharp 18.5 mm., with original Toyota compact spinning
Ring dia. 36 mm., Bottom roller dia. 27/27/27, Toyota Alpha top arm, Short cradle, Suction flute type, With auto doffer, Main motor 65 kw. 380 V./50 Hz.

Murata Winding Links:
Quantity: 1, Year: 2005, Model 21C, No of drums 20, CBF type, Zenit plus yarn clearer, Multi drum, G2Z splicer, With waxing device, With 21D-II auto doffer, Upwards air discharge, 380 V. 50 Hz.

Conditions excellent

AC63/201023/

Murata Vortex 861 MVS

Quantity: 1, Year: 2010, No. Spindle 80, Total Length of M/C : 20780 MM, Nozzle Type Standard/Orient, Spindle Type 1.1 MM, Conicity 4°20′, Piecing Standard Air , Splicer, No. Splicer 2, With One Auto Doffer, Top Roll Cots 83°, With Poly Master, Nozzle (Sliver delivered through the nozzle), Standard Orion Type, Yarn Clearer of Original Murata 861, Running Count : 30/1, 40/1, 60/1, Production / day : 1000 kg/day for 30/1, Polymaster : All machine Equipped with polymaster purchased in 2015, Running Item With Speed Ratio : – 100% Rayon, 430 m/min, 100% Polyester, 380 to 390 m/min, Air consumption 200 cfm.

AD39/131023/

Toyota RX 240 Ring Frames

QUANTITY: 8, YEAR: 1997, BOTTOM ROLL DIA F/M/B: 28,5/27/28,5, SPINDLE GAUGE: 75 mm, TOP ARM MODEL (SKF): PK 2025 and part no.1251331, CRADLE SIZE: Medium, RING FLANGE DIA 38 mm / 36 mm: 6 machines with 38 mm & 2 machines with 36 mm, RING FLANGE TYPE, MAKE: Single/ Bracker, SPINDLE BOLSTER MAKE. TYPE: Novibra, RING FRAME BOBBIN LENGTH: 210 mm, BACK BOTTOM ROLL CLEARER TYPE: pad clearer type, MACHINE MODEL: RX240 SF-1008, SPINDLE GAUGE: 75mm.

AB46/290923/

Muratec Vortex MVS 870 Air Jet Spinning Machines

Quantity: 3, Year: 1×2013, 2×2010, Model: MVS870 II, Positions – 96, Without Polymaster, Splicers – 4, 440 V 60 Hz

AE73/260923D/ACP/M/BA/

Murata Vortex 861

Quantity: 3, Year: 2010 , No of spindles: 80 , No of splicers: 3 , Machines are in very good working conditions.

AH01/250923/

Cotton Machines

1x Zinser 351 ring frame
1x Zinser 670 flyer
1x Trutzschler TC 11 Carding
1x Trutzschler TC 03 Carding
1x Trutzschler TC 07 carding
1x Trutzschler DK 803 carding
1x Rieter blowroom Line
1x Trutzschler blowroom Line
1x Schlafhorst Se12-480 open end
1x Schlafhorst Se12-360 open end
1x Rieter R60-540 open end
1x Rieter R40- 360 Open end

AC29/050923/AS/

Murata Vortex Jet Spinning

Quantity: 8
No.MVS 861, 80 spindles
1x Year: 2006 (Serial Number: 06SX315630XYZ)
1x Year: 2007 (Serial Number: 07SX206080XYZ)
1x Year: 2007 (Serial Number: 07SX238990XYZ)
1x Year: 2007 (Serial Number: 07SX208560XYZ)
1x Year: 2008 (Serial Number: 08SX258410-XYZ)
1x Year: 2008 (Serial Number: would be give n later)
1x Year: 2007 (Serial Number: 07SX238980XYZ) with poly master
1x Year: 2007 (Serial Number: 07SX208560XYZ) with poly master

Its very high quality.
Each machine updated by Muratec technician at price of Eur 20,000 cost in 2020, machines are high quality.
Machines professionally dismantled and moved to warehouse.

Main Frame
1.Model : MVS861
2.No of Units : 80 sp/Machine
3.Power Source : 440V & 60 Hz
4.Yarn Count Range : Ne15-60
5.Sliver Material Processed : Rayon 100%,Modal100%,Lyocell 100%, T/C,R/C,Acrlic,AC,Cotton100%
6.Fiber Length : 38mm
7.Sliver can size (out side dia) : 20 x40
8.Sliver guide : 5 line
9.Sliver weight : Grain/yard

Depend on spun yarn count

Draft zone
1.Drafting device : 4 line
2.Side plate : 49-43-45
3.Bottom Roller Guage : 44.5-41-41
4.Draft device : 4 line

Gearing
1.Spinning Speed : Changeable by Inverter
2.Total draft ratio
3.Main draft ratio :
4.Feed ratio:
5.Take up ratio

Take up
1.Max packing diameter : 300mm
2.Take up tube : 5 deg’ 57′

Knotter / Splicer
Type : Splicer
Other Specification

1.Basic Plate
2.Exhaust duct : Bottom
3.Electric Power Supply Direction: From bottom
4.Air Supply direction: From bottom
5.Dust collection: Individiual
6.Tension ruller : with
7.Condensor : 1,2,3,4,5,6,7,mm
8.Top roller type : 78 deg’
9.Trumpet : 9mm
10.Front spring : 16kg
11.Apron Spring : 3kg
12.Middle spring : 22 kg
13.Back spring ; 22kg
14.Apron Belt : Top : black ( for synthetic) Bottom
15.Middle roller : Rubber made
16.Back bottom roller flute : 90T
17.Spindle ( super fat type ) : 1.2mm
18.Nozzle : Z twist, 4 Hole/Eco type
19.Holder : L8 type-9.3mm Neddle

Standard Equipment
1.VOS (visual on-dimand system) control panel
2.MSC ( Murata Spin Clearer ) -Digital clearer
3.Tension roller ( Magnet type )
4.Yarn Length measuring device
5.Individual inverter drive
6.Automatic Travelling Splicer ( 2 sets/machine )
7.Auto doffer (1 set/machine )
8.Vaccume chamber with automatic waste fiber extracting system
9.Package conveyor device
10.Air compressure control panel
11.Rcommendable spare parts

Optional Equipment
1.Waxing device
2.Package conveyor
3.Power failure back up system
4.Package lifter

AG52/110823/BS/

Rieter K44 Ring Spinning

Quantity: 2, Year: 2004, 1008 spindles, Ring 40, Escartamento 50mm, R2P drafting system with P3-1 guide arm.

AG52/080823/BS/

Rieter Spinning K45

Quantity: 14, Year: 2008, Condition: Running.

AG52/080823/BS/

Rieter Spinning G33

Quantity: 14, Year: 2008, Condition: Running.

AG52/080823D/ATI-AL/M/BS/

Muratec Vortex 861 MVS Air Jet Spinning

Quantity: 4, Year: 2010, No Of Spindles: 80, Model: Vortex 861 MVS, Spindle Type: Super FAT, Conicity: 5º57, Traverse: 6”, Feed Can Size: Diameter = 20” – Height = 1,20 m, Doffers: 1, Splicer Nozzle Prism: G2Z, No Of Splicer: 2,Clearer Type: MSC, Waxing: yes, The machines do NOT have the Poly Master.

AE30/140723D/ARL-AI/F/BA/

Muratec Vortex MVS861

Quantity: 4, Year: 2011, Type: MVS861, 80 spindle, Auto doffer: 1, No of Splicer: 3, With polymaster, Running on mill floor.

AE30/100723D/YS.L-R.L/F/BA/

Toyota Ring Frame

Quantity: 48, Year: 1999-2002, Model RX240SF-1008, 1008 spindles, Spindle wharp 18.5 mm. Ring dia. 40mm. With auto doffer, 380 V./50 Hz.

AH27/100723/BA/

Muratec Vortex 861 Spinning

Quantity: 2

AH27/100723D/ARA-S/F/

1x Year: 2009, 80 spindles , with the ploymaster

AH27/100723D/ACS-S/F/

1x Year: 2011, 80 spindles , without the ploymaster

AE30/100723D/CTO-AO/F/BA/

Murata Vortex 870 Spinning

Quantity: 8, Year: 2016/2017, 96 Spindles , Spindle pitch: 235mm, With poly master, 4 splicers, 1 doffer, Nozzle type: Eco, Waxing: available, Coni city: 5*57, Traverse: 6”, Yarn joining: splicer, Splicer nozzle prism: G2Z, Clearer type: MSC, Power: 380 Volt,50hz. Running on mill floor.

AE56/100723D/CTC-AO/F/BA/

Muratec Vortex 870 Spinning

Quantity: 16, Year: 2014, 96 spindle, 3 splicer each, Two containers each machine needs, Running condition.

AG52/270623D/TL-AL/M/BS/

Howa Spinning Machines

Quantity: 5, Year: 1979 – 1989, Model: HB111, 504 spindles
hey work with Polyester/cotton and Polyester/ Viscose and Viscose
Diameter x base / flange
Flange1 – 3,2 mm
Flange 2 – 4,1 mm
Machine. N.1 – ring 48 mm X 57 mm/1
Machine N.2 – ring 50 mm X 57 mm/2
Machine N.3 – ring 54 mm X 62 mm/2
Machine. N.4 – ring 50 mm X 57 mm/2
Machine N.5 – ring 50 mm X 57 mm/2
With Pinter Flame on all 5 machines, plastic tubes , flyer cleaner and some spare parts available also included

AG52/210623D/ASI-P.L/M/BS/

Rieter G35 Spinning Frames

Quantity: 14, Year: 2008, 1440 Spindles.
Linked with 28 autoconers Schlafhorst 338 – Year 2008 (29 spindles for 23 machines and 26 spindles for 5 machines)
Possible to sell sets separately. Machines still running.

AC32/050423D/AYL-AO/C/BC/

Murata Vortex MVS861

Quantity: 1, Year: 2008, 80 spindle, 2 Auto splicer, 1 Auto doffer, With polymaster device, Running condition, Need 40ft x 1 and 20ft x 1 container for loading.

AE56/220323/

Muratec Vortex 861

Quantity: 20, Year: 2012, 80 spindle, With waxing device, Without refueling device, Running condition.

AB46/080323/CA/

Muratec Vortex MVS861

Quantity: 4

AB46/080323D/AIA-T/F/CA/

3x Year: 2010

No of Spindles 80
Spindle Type Super Fat
Spindle Size SF1.1 and SF1.2mm
Conicity 4°20
Traverse 6" (146mm)
Feed Can Size 16~20"
Doffers 86D x 1head
Yarn Joining Air Splicer
Splicer Nozzle Prism G2Z
No of Splicer 2 Carriages
Clearer Type MSC (basic)
Nozzle Type STAR
Needle Holder Type 2PZ9.3L8
Break Draft Wheel 30t
Waxing with (diam 15mm)
Hot Air Exhaust from MC to ceiling
Waste Fibre Extraction Std
OHTC 1 per Machine Make Luwa-D
Voltage 440V
Frequency 60Hz
Material Process Poly/Cotton (Ne24~40)
(Package conveyor) L to R

AB46/080323D/ACP-P/C/CA/

1x Year: 2008

No of Spindles: 80
Spindle type: Conventional
Spindle size: 1.0 mm
Traverse: 6"(146mm)
Feed Can Size: 20"
Doffers: 86D x 1head
Yarn Joining: Air Splicer
Splicer Nozzle Prism: G2Z
No of Splicer: 2 Carriages
Clearer Type: MSC (basic)
Crown Attachment: Yes
Polymaster: Attached
Nozzle Type: ECO
Needle Holder Type: L8 9.3
Break Draft Wheel: 30T
Control Panel: VOS II
Waxing: Available (Dia.15mm)
Hot Air Exhaust: Upward
Waste Fibre Extraction: STD
OHTC: 1 per machine
OHTC Make: Luwa-D
Voltage: 440V
Frequency: 60Hz
Material Process: Poly/Cotton (Ne 24-40)
Package conveyor: R 10 L
Condidon: Running
Running material: Cotton/Modal
Runnin count/range: 40/18-40

AB52/070323E/TP-L/F/AP/

Rieter J20 Jet Spinner

Quantity: 5, Year: 2012, Model: J20, Each machine with 120 spindles and 4 robot; traverse 6 inch cylindrical ; waxing; Count Range 30/90NM, Speed 400/480 mt/min
You can work with these machines: Acrilic Viscosa / Poly Viscosa / 100% Viscosa.
Machines in operation

AA02/070323D/ARA-T/M/

Murata MVS Vortex 861 Air Jet Spinning Frames

Quantity: 12

11x MURATA MVS VORTEX AIR JET SPINNING FRAMES
Model 861, Year: 2011 / 2012, 80 Positions, VOS Computer system, 1 Doffer Model 86.D, 2 Air Splicers Model 86.C, Cone Take up – 5 deg 57, Waxing, Murata Clearers, Each with Overhead Blower and tracking, Full Length Full package conveyor.

1x MURATA MVS VORTEX AIR JET SPINNING FRAME
Model 861, Year: 2011 / 2012, 80 Positions, VOS Computer system, 1 Doffer Model 86.D, 2 Air Splicers Model 86.C, Cone Take up – 5 deg 57, Waxing, With Polymaster
Murata Clearers, Each with Overhead Blower and tracking, Full Length Full package conveyor.

AE30/160223D/TT/F/BA/

Rieter Ring Frame K45

Quantity: 21, Year: 2008, Model: K45, No of spindles 1200, The inverter is Rieter, Creel, No of rows4, Automatic bobbin creeling , Machine Guage 70mm, Drafting, Top arm make and model P3-1, Spinning angle: 10°, Bottom roller dia front 59, Bottom roller dia middle: 27, Bottom roller dia back 27, Top roller dia front 32, Top roller dia middle 25, Top roller dia back 32, Suction tube dia near head stock: 9, Suction tube dia near off end 15.5, Clearer roller details (Top and Bottom), With auto doffing
Main motor: 55kw
Spindle: Insert type (Novibra/SKF): HPS-25, Lift in mm and DUI 370, Taper ratio 0.086111111, Bobbin length 190, Bobbin dia top 20(10), Bobbin dia bottom 23(18), Ring dia 38/42, Spindle tape width and Length: 2330*10.
Running on mill floor.

AE73/200123E/RS-C/M/AU/

Cognetex Spinning Frames Mod. Idea R83

Quantity: 4, Year: 2001, 624 spindles each, 2 machines with lycra mechanism, ring dia. 51 mm., tube length 260 mm. Drafting PK1601, spindles speed: 3800 – 13300 rpm, angle of drawing tool: 60°. Machines are in good working conditions without any missing part.

AA05/040123E/CR-R/F/DE/

Cognetex Spinning Frame mod. FTC8L

Quantity: 1, 736 spindles, ring dia. 51 mm., gauge 82.5mm,, PK 1601 drafting, Magitex blower

AB65/030123/

Rieter Roving Frame F-33 / Rieter Spinnin Frame G-33 / Savio Orion Winder

1x ROVING FRAME RIETER F-33
Year: 2001, 120 spindles, Automatic change, Bobbins 16”x6”, Draft SKF, Cleaning System, Stop motion ROJ Electrotex, Blower Luwa.

TRANSPORT AUTOMATIC BOBBINS ELECTRO-JET
Year: 2008

5x SPINNING FRAME RIETER G-33
Year: 4×2001 , 1×2002, 912 spindles, Ring 42 mm, Tube 210 mm, Draft Rieter, Automatic change, Individual Bolwer Luwa.

LINK:
5x SAVIO ORION WINDER
Year: 4×2001 , 1×2002, 20 spindles (available add 2), Spalicer Mesdan, Uster Quantum C-15, Waxer, Cone 4º 20, Automatic cone change, Individual Blower Electro-jet.

MACHINES IN RUNNING