AD92/181023E/YY.L-S/F/
Stenter Monforts
Quantity: 1, with ISOTEX from year 1995
w.w. 2.20 m, 6 chambers, horizontal chain with pins and clips, oil, padder
Kusters, . Machine totally electronic updated with inverters in 2018 (total investment of 100.000€)
AB55/161023/BH/
Reggiani Stenter
Quantity: 1, Year: 2005, 5 chamber Oil / Gas, 3400 MM Roller width , 3200 MM working width , 3 bolls Padder Italy, Weft Statener – Mahlo, Cooling Zone, Exit on Batcher, Lubricant free Chain.
AB55/161023/BH/
Artos Babcock Stenter
Quantity: 1, Year: 1988, Oil 6 Chamber, 3200 MM Roller width , 2800 MM working width , Entry with cloth Guider. Padder, Weft statener EL 2006, Cooling Zone, Long chain Entry, Exit on Batcher, Lubricant free chain.
AB55/161023/BH/
Babcock Stenter
Quantity: 1, Year: 1995, with 6 Chamber Oil/ Gas, 6 Chamber 3650 MM Roller width, 3200 MM working, width Oil and Gas , Entry with cloth guider, 3 bolls Padder CIATTI Italy, Weft statener Bianco, cooling zone , Long chain Entry, Exit on batcher and platter, Lubricant free Chain.
AB55/161023/BH/
Babcock Stenter
Quantity: 1, Year: 1995, with 5 Chamber, 3400 MM Roller Width, 3200 MM Working Width, with 5 Chambers (Gas / Oil), Entry With Cloth Gider & Brushing Roller, Padder 3- Bolls Kuster Pakistan, Weft Statener – Mahlo Cooling Zoon, Batcher & Lubricant Free chain Pakistani.
AB55/161023/BH/
Babcock Stenter
Quantity: 1, Year: 1995, with 7 Chamber Oil / Gas, 3400 MM Roller Width 2800 MM Working Width with 7 Chambers (Gass / Oil) , Entry with cloth Guider, 2 boll kuster padder ,weft statener Mahalo, Exit mahalo but not working,cooling Zoon, Exit on batcher, lubricant free chain.
AB55/161023/BH/
Monforts Stenter
Quantity: 1, Year: 1985, With 8 Chamber (Oil/Gas), 3400 MM Roller Width 2800 MM Working Width with 8, Chambers (Gass / Oil) , Entry Scray Cloth Gider, Kuster Padder, IR – 2 stack Zimer, Weft Statener – Mahlo, Long Entry Chain, Exit Batcher, Lubricant Free chain.
AB55/161023/BF/
Monforts Stenter Frame
Quantity: 1, Year: 2011, Roller Width 3400 mm, 8 chambers, Gas fired, Weko system installed, Continuous entry with J scray, 2 bowl monforts padder, Mahlo weft Straightnr, Exit Mahlo in addition , 2 roll cylinder dryer, Exit with plaiter and batcher. Pin Chain only.
AC11/091023D/SLI-TI/F/CW/
Used Open Width Pad Steam Range
1x Monfort (Germany) Thermosal
Year: 2007, Working width: 1800mm, 3chambers – gas heating, Buner: Maxon – Belgium, IR : Monforst- 3pcs – gas heating, Buner : Maxon – Belgium, Cooling roller : 2rollers, Tension roller, J-box, Exit batching roller.
1x Kuster (Germany) Dyeing Padder:
Year: 2007, Width: 1800mm, Entry device, J-box, Centralling device, Tension roller, Waxing device.
1x Kuster (Germany) Pad team washing
Year: 2007, Working width: 1800, Entry device, J-box, Chemical Padder – Kuster, Dyeing steamer – 1pcs, Washing box : 8pcs, Padder : 8pcs, Dryer roller : 26pcs, J-box
Exit batching roller, Siemen PLC controller, Control panel with air condition, Condition: stop and test running before loading., Power: 380V, 50Hz.
AB55/120823/AQ/
Monforts Montex Stenter
Quantity: 1, Year: 2001, Montex 5000 8F, Width 2200
inlet from big roll or plaiter with J-Box, padder, weft-straightener, 8 chambers, gas heating, Conti-Clean dust filetr system, outlet with driven exit roller, nr.2 cooling drums, peripheral winder combined exit.
Beta Padder and Mahlo Weft Straightner are not included, but we can supply Padder and of Mahlo weft Straightnr from another place that we have, it would be a complete stenter line pre dryer and frame is not included.
AC09/041023D/CTI-CI/F/BF/
Bruckner Split Flow Stenter
Quantity: 1, Year : 2001, Fabric Width: 1800 mm, Roller Width: 2000 mm, Heating Sources: Gas, Chain Section: Horizontal Pin, Weft Straightener: Bianco, No Of Chambers: 11.
AG54/180923/
Bruckner Stenter
Quantity: 1, Year: 2002, Useful working height 2000mm, 6 fields, Gas powered, Infeed with dogal and Bianco brand weftstraightener, Vertical chain, Outlet with cooling and groundwater.
AB35/110923/
Bruckner Stenter Frame
Quantity: 1, Year: 2004, Working Widh 2400mm, 8 Fields
Two Padder, In Exit Dock Winder And Folding System
Tendamatic Side Cutting Device
Automatic Fixation, Pleva Moisture Meter
AB35/110923/
Dryer Krantz
Quantity: 1, Year: 2000 , Working Width 2400 Mm, 4 Fields In One Pass, Gas Heated, With Padder
AA25/030923/
Bruckner Stenter
Quantity: 1, Year: 1992/2019, Gas heated, pin chain, 340 cm, 6 chambers, SETEX 848. It is good for knitted and woven fabrics.
*AD26/260823E/AOR-AL/F/AQ/
Reggiani Stenter
Quantity: 1, Year: 2001, model THERMA, Working width 340 cm.
Entry Jbox for feeding fabric -Beta padder with 2 cylinder rubber covered , and tank impregnating product -Entry & exit MAHLO WEFTSTR.
6 electronic heads , and Accumulator fabric device – 1-Zanzottera mixer products – 2-Zanzottera storage tanks -12 -chambers heating 12 metan gas burners -horizontal chain with clips ( it is possible to add some parts to also have chain with pins)
Loading in 7-8 containers 40’
AE56/180823/
Biancalani AIRO Auattro Tubular Soften Dryer
Quantity: 1, Year: 2017, Italy origin, Running time less than 6 months.
AE02/180823/
Monforts Thermosol
Quantity: 1, Year: 2014, ww. 3400 mm, feeding combination with cloth scray, Benninger Küsters dye padder 222.18, Thermex infrared red dryer, Thermax hot flue, exit combination with J-scray
AB55/080823E/AOO-AO/F/AQ/
Babcock Stenter Frame
Year: 1996, Width: 3400mm
8 Chambers, 2x Chambers pre-dryer, Pin chain, Entry with J Scray, 2×3 Bowls Padders, Bianco Weft Straightener, Inventor Controlled, Siemens Electronic, Upgraded in 2018, Continous exit with roller and batcher + plaitor.Heating is Gas
AA10/200723/
Monforts Stenter
Quantity: 1, Year: 1999, For weaving fabric and knits, Type MONTEX -7F-Twin air, Working width 240 cm, 7 chambers, Thermo-oil heating, 1 Cooling chamber, 2 extractors.
AE56/160723/BA/
Bruckner Stenter
Quantity: 1, Year: 2013, Width 260cm, 8 chamber, Steam heated, With centring padder, With Mahlo Weft straighner, Vertical chain, Running condition.
AD92/140723E/LI-L/M/
Bruckner Dryer
Quantity: 1, Year: 1998, w.w. 2.40 m, Gas, 2 chambers, 2 passages
AE56/080723/
Bruckner Stenter
Quantity: 1, Year: 2012, Working size 180cm, 8 chamber, Steam heated, With centring padder, Mahlo Weft straighner, Vertical chain.
AE56/050723D/ARC-AC/F/
Monforts Stenter
Quantity: 3, Year: 2010, Roller size 200cm, Working size 180cm, 8 chamber, Chain with clip and pin, Mahlo weft straighner, With centring, With padder, Horizontal chain, Steam heated, Running for woven fabric.
AE56/030723D/CSL-CI/C/BA/
Bruckner Stenter
Quantity: 5, Year: 2013, Width 220cm, 6 chamber, Steam heated, With centring padder, With Weft straighner, Vertical chain. Ctrs requirement: 6 x 40′ HC.
AA02/260623D/PI/M/
GEAF Radio Frequency Driers
Quantity: 4, Year: Like New less than 200 running hours
Each with: 2100mm working width, 45 KW Power, Frequency 27 MHz, Double electrode plane, Exhaust fan, Electronic control panel, max water evaporation – 54 KG H2O per hour, Max power consumption – 68 KVA at max water evaporation.
AD92/230623/
Stenter Bruckner
Quantity: 1, Year: 1986 reconditioned in 2019
w.w. 3.20 m, 4 chambers, horizontal chain (clips),
gas with Laudati Burners, Bruckner padder
AB55/170623D/AIS-S/F/AR/
IL Sung Stenter Frame
Quantity: 1, Year: 2005, Working Width: 2400 mm, Heated by Oil, 8 Chambers, Pin Only Chain, 4 Bowl Finishing Padder, Mahlo Weft Straightener, Edge Guide and Trim with Tendamatic, E & L Guiders and Scanners, Exit with Plaiter for Flat Fold.
AE56/130623/
Santex Dryer
Quantity: 1, Year: 2012, width 240cm, 6 chamber, steam heated, with padder, running conditions
AE56/300523/
MONFONGS STENTER
QUANTITY: 1, YEAR: 2011, 260CM ROLLER WIDTH, 8 CHAMBER, GAS HEATED, 1 PADGAS, Without WEFT STRAIGHNER
PIN CHAIN, LENZE INVERTOR, SIMENS PLC, SIMENS MOTOR, TEST RUNNING OK
AD92/290523E/TA-S/M/AY/
Bruckner Dryer
Quantity: 1, Year: 1998/renewed in 2018, w.w. 2.80 m, Oil, 3 chambers, 2 passages
AD26/260523E/ALS-O/M/AQ/
Krantz Stenter
Quantity: 1, Year: 2007, Model K30 Econ-Air, Working width 2400mm., 8 chambers, gas heated, vertical pins chain.
AA27/240523/
Osthoff Singeing
Quantity: 1, Year: 1979, Model: UNIVERSAL 68, Width: 2200 mm, Working Width: 2000 mm, Introduction with guiding system E+L, Accumulator double slide , Brushing OSTHOFF pre singeing machine 1992, Singeing machine with two burners, Brushing OSTHOFF post singeing machine 1992, Impregnation tanks stainless steel CIMI , Squeezing out
Out Winder, 60 semi-new refractory bricks for singeing machine ramps, Full blast fumes.
AG52/170523D/ASC-AC/M/BS/
Monforts Montex 6500F Stenter
Quantity: 1, Year: 2008, Stenter Thermic Fluid 1800 mm, 6 chambers, 60~100mts/min, Power 90kw, Tension 440v.
AG52/120523D/AAI-AI/M/BS/
Bruckner Stenter
Quantity: 1, Year: 2009, 5 chambers, Productivity: 35 mts/min, Gas 1800mm, Power: 45 Kw, 440V, 2x Foolards, 1x Fabric centralizer, 1x Non-stop, Weft straightener, Machines is older than 2009 but owner does not know year (YOM) – machine has no plate. They bought used in 2009 and OVER HAULED IT COMPLETELY. Assembled, Stopped.
AE02/080523/
Fleissner Sieve Belt Dryer
Quantity: 1, Year:1998, ww. 2200, roller width 2500 mm, gas heated, 4 chambers
AE02/080523/
Monforts Stenter Frame Montex
Quantity: 1, Year: 1986 (several times overhauled)
ww. 2400 mm, foulard, combi chain (needle and pin), gas heated, 2 chambers, cooling section
renovations: driving system changed to frequency inverter (2011) / new batcher (2014) / new installed Pleva sensors TDS95 for heat control (2015)
AE02/080523/
Bruckner Stenter Frame / Coating And Finishing Line
Quantity: 1, Year 1991, ww. 2350 mm, 6 chambers, gas heated (Maxon burners), with Jacob Weiß coating unit
AE56/040523/
Bruckner Stenter
Quantity: 4, Year: 2013
3 sets: width 260cm, blue color
1 set: width 280cm, white color
8 chambers, Steam heated, With center padder, Mahlo Weft straighner, Vertical chain, Running condition.
AE56/190423/
Monfongs Stenter
Quantity: 1, Year: 2014, width 260cm, 9 chamber, oil heated, with weft straighner, Horizontal chain, with centring, with padder
AA02/110423/
Santex Dryer
Quantity: 1, Year: 1998, Type Santashrink 3/KJ 260, 106” wide Belt Conveyor, 3 Sections, 2 Pass Gas fired Maxon Burners.
AA07/070423D/CRC-AY/C/
Bruckner Stenter
Quantity: 1, Year: 2010, Working Width: 2600mm, Drying chambers: 6, Gas Heating
Vertical pin chain, with mahlo weft straightener, With centring device and padder, machine is in running condition.
AE56/030423/
Monfongs Stenter
Quantity: 1, Year: 2011, Width 280cm, 8 chamber, Gas heated, With centring padder, Horizontal chain.
AC09/280323D/LOI-RI/F/BQ/
Bruckner Pad dry Thermosol Dyeing Range
Quantity: 1, Year: 2006, Thermosol Dyeing range with Kuster dye padder
Model HOT FLUE HF, Roller width 3400 mm, Working width 3200 mm, Kuster dye padder
Model 222.18.3200., Fabric speed : 4 to 80m/min
High fabric feeding frame, J Scary traction roll, expander, Tension bar, E+L guider
3 chemical storage tanks, 3 Chemical service tanks, Sera dozing pump ,model : ZRF413 LE, Bruckner relaxing unit
2 units IR burner, heating by gas
Make :ICE Burner technology , Netherlands, Model :WB 32
Quantity of burner : 2×4, Capacity burner appliance : 568KW
Fuel : LPG, Bruckner HOT FLUE, Year :2006
Model :HF-32/3-180/444, 3 multi rolls hot flue chambers
Each compartment length :4.65m, Split flow air circulation, Circulating air temperature 210 c, Oil heated
Cloth content :30m- 37 m, Roll dia :180mm, 2 cooling cylinders, J scary, cloth expander, E+L guider
Batcher /plaiter, Pleva temperature controller, Model : FS91B, Total length :34m, Total width : 8m
AB05/260323E/COL-CI/F/AN/
Bruckner Stenter
STENTER/HEATSETTING FRAME
Year: 2003/2004, type HN 28/6, 6 chambers gas heated, CLIP CHAIN, upper roller width 3.000 mm, suitable for a fabric width of 600 mm upto 2.800 mm, variable adjustable, comprising out of cloth feeding by tensionfree separate unwinding device, entrance into fabric compensator by dancing roller with capacity of approx. 8 mtr, feeding via rotary expanding rollers into 2 roll application and squeezing mangle make MENZEL, deviation and fabric feeding rollers by stainless steel into PLEVA weft/bow straightener with visualisation, SIEMENS SIMATIC MULTI PANEL installed at the entrance as well as at the exit, stainless steel guide and feeding rollers into stnter frame with ERHARDT & LEIMER expanding device, ERHARDT & LEIMER optoelectronic width control type FR5502, horizontal clip chain, working panel at entrance made by SIEMENS, 6 chambers gas heated with 6 gas burner left side, 6 burner right side type BRÜCKNER RM 100 VER 3.10, cooling zone, WEFT STRAIGHTENER made PLEVA type SD1, PLEVA humidity control type TDS 95, fabric delivery onto big batch winder, LENZE INVERTER, SIEMENS S7, electronic panel boards are equipped with AIR CONDITION DEVICES
chain type SK936 K VII MOD
entrance field 3,0 mtr
exit field 3,0 mtr
split flow system with separate air circulation for upper and lower air by hot fans
max temperature 230°C
exhaust volume 9.000 m³ fan 1, 9.000 m³ fan 2
2 exhaust fan
max winding diameter 2.000 mm
Machine is Excellent quality and in production
AB55/250323E/CRC-AO/F/
Bruckner Stenter
Quantity: 1, Year: 2002, Width 320 cm, 5 chambers, Gas heating, Erhard + Leimer ELTWIN web guiding system, With Brückner foulard, with Mahlo weft straightener with a cylinder width of 320 cm and 6 sensors, Bruckner Ratiomatich RM100-VER 3.10 burners, Exit with big batcher and plaiter cylinder width 310 cm.
AD63/230323/
Bruckner Flat Stenter
Quantity: 1, Year: 1992, 5 chambers gas heated with inverter, Working width: 1.800 mm, Number of chambers: 5, Number of burners: 10, Heating system: gas, Vertical chain, Chain with pins and anti-depinning system, Entry from big rolls or plate, Padder BRUECKNER with two rollers, Cooling system in delivery with air blowers, Delivery in plate, Double exhauster for ejection of exhaust fumes, Electrical panel, NEW motor and inverter replaced in year 2020 for: BRUECKNER padder, stenter chain, overfeed cylinders and wheels, NEW PLC for manage working width chamber by chamber, changed in year 2020, All anti-depinning parts are changed in year 2020.
AD92/180323E/ALL-AL/M/AV/
Bruckner Stenter
Quantity: 1, Year: 2004, For woven, w.w. 3.0 m, 6 chambers, Horizontal chain with pins and clips, thermal oil, With Kusters padder (2 bowls, type 222.59.3000), Weftstraightener Corino with 6 heads in the entry, Weftstraightener Corino in the exit with 6 heads. This machine is in mill floor but stopped.